LG Fuzzy Logic 7.5 kg Washing Machine Manual

The LG Fuzzy Logic 7.5 kg Washing Machine is a front-loading washing machine with advanced fuzzy logic technology that automatically adjusts washing parameters based on load size and fabric type. Features include multiple wash programs, energy-efficient operation, child lock, delay start, spin speed adjustment, and self-cleaning functions. Below are key sections for safety, features, installation, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Utilities 7. Operating the Washing Machine 8. Safety Features 9. Care & Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Fuzzy Logic Control System, Digital Display, Program Selector, Start/Pause Button, Door Lock, Water Inlet, Drain Hose.

FeatureDescription
Fuzzy Logic TechnologyAutomatically adjusts water, time, and temperature
7.5 kg CapacitySuitable for medium to large households
Multiple Wash ProgramsCotton, Synthetic, Delicate, Quick Wash, etc.
Energy EfficiencyA+++ energy rating for reduced consumption
Child LockPrevents accidental program changes
Delay StartProgram start delay up to 24 hours
Spin Speed ControlAdjustable from 400 to 1200 RPM
Self-CleaningAutomatic tub cleaning function
Digital DisplayShows time remaining and program status
Water ProtectionAnti-leakage and overflow protection

Installation

Unpack and inspect contents. Place on level, stable floor.

  1. Remove transit bolts: Use wrench to remove all transit bolts from rear.
  2. Connect water supply: Attach inlet hoses to water taps (hot and cold).
  3. Connect drain hose: Place drain hose into standpipe or sink.
  4. Level the machine: Adjust feet to ensure machine is perfectly level.
  5. Plug into grounded power outlet.

WARNING! Do not remove transit bolts before installation. Ensure water connections are tight to prevent leaks.

First-Time Setup

Plug in machine; run initial setup cycle.

  1. Run cleaning cycle: Select Self-Clean program without laundry.
  2. Set preferences: Adjust default settings like spin speed and temperature.
  3. Test operation: Run short cycle to verify proper function.
  4. Enable child lock: If needed, activate from control panel.

CAUTION! Ensure machine is level and all connections are secure before first use.

Specifications

Controls and Settings

Access controls via front panel display and buttons.

Main Controls: POWER, PROGRAM SELECTOR, START/PAUSE, SPIN SPEED, TEMPERATURE, DELAY START.

Program Selection: Rotate dial to select desired wash program. Temperature Settings: Cold, 30°C, 40°C, 60°C, 90°C. Spin Speed: 400, 600, 800, 1000, 1200 RPM. Special Functions: Pre-wash, Extra Rinse, Rapid Wash. Display: Shows time remaining, current program, and selected options.

Connecting Utilities

Water Inlet: Connect to cold and/or hot water supply. Drain: Connect drain hose to proper outlet.

  1. Turn off water supply before connecting hoses.
  2. Use only provided hoses; do not use old hoses.
  3. Ensure drain hose is not kinked and is securely placed.
  4. Plug into grounded electrical outlet only.

Tip: Check for leaks after first connection and periodically thereafter.

Operating the Washing Machine

Follow these steps for normal operation.

  1. Load laundry: Open door, load clothes evenly distributed.
  2. Add detergent: Use appropriate amount in detergent drawer.
  3. Select program: Turn dial to desired wash program.
  4. Adjust settings: Set temperature, spin speed, and additional options.
  5. Start cycle: Press START button; door will lock automatically.
  6. Monitor progress: Display shows remaining time.
  7. Remove laundry: Wait for door unlock signal before opening.

WARNING! Do not open door during operation. Wait for door lock indicator to turn off.

Safety Features

Child Lock: Prevents accidental program changes. Door Lock: Automatic locking during operation. Overflow Protection: Shuts off water if detected. Imbalance Detection: Adjusts spin or stops if load is unbalanced.

Care & Maintenance

Regular maintenance ensures optimal performance.

  1. Clean detergent drawer: Remove and rinse monthly.
  2. Run self-clean: Use self-cleaning program every 30 cycles.
  3. Wipe exterior: Use damp cloth; no harsh chemicals.
  4. Check hoses: Inspect for cracks or leaks every 6 months.
  5. Clean door seal: Wipe rubber seal to prevent mold.

CAUTION! Unplug machine before cleaning. Do not use abrasive cleaners.

Regulatory Information

CE Certified: Complies with European safety standards. Energy Label: A+++ rating according to EU regulations. RoHS Compliant: Free of hazardous substances. For support, visit www.lg.com or contact LG Customer Service at 0800-000-000.

Troubleshooting

SymptomPossible CauseCorrective Action
Machine won't startPower/doorCheck power connection; ensure door is properly closed.
No water intakeTaps/hosesEnsure water taps are open; check hose for kinks.
Excessive vibrationLeveling/loadCheck machine level; redistribute load evenly.
Water not drainingDrain hoseCheck drain hose for blockages; ensure proper height.
Error codes displayedVarious issuesRefer to error code list in manual; reset machine.

Reset: Unplug for 5 minutes, then restart.

Service: 0800-000-000; www.lg.com

LG Fuzzy Logic 7.5 kg Washing Machine Manual © - All Rights Reserved 2025