LG Front Loading Washing Machine WM 3001 HRN Manual

The LG Front Loading Washing Machine WM 3001 HRN is a high-efficiency 7kg capacity washing machine with direct drive motor technology, multiple wash programs, energy-saving features, child lock, delay start, and digital display. Below are key sections for safety, features, installation, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Utilities 7. Operating the Washer 8. Safety Features 9. Care & Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Direct Drive Motor, Digital Display, Control Panel, Door Lock, Detergent Dispenser, Water Inlet Valves, Drain Pump.

FeatureDescription
Direct Drive MotorDirect connection to drum for quieter operation and longer lifespan
7kg CapacitySuitable for medium-sized households
Multiple Wash ProgramsCotton, Synthetic, Quick Wash, Delicate, Wool, Spin Only
Energy SavingA+++ energy rating for reduced electricity consumption
Child LockPrevents accidental program changes
Delay StartProgram start delay up to 19 hours
Digital DisplayShows remaining time, current program, and settings
Door LockAutomatic locking during operation for safety
Detergent DispenserCompartments for pre-wash, main wash, and fabric softener
Water Inlet ValvesHot and cold water connections

Installation

Unpack and inspect contents. Place on level, stable surface.

  1. Remove transit bolts: Locate and remove all transit bolts from rear panel.
  2. Connect water supply: Attach hot and cold water hoses to corresponding valves.
  3. Connect drain hose: Secure drain hose to standpipe or sink.
  4. Level the machine: Adjust leveling feet to ensure machine is stable.
  5. Plug into electrical outlet: Use grounded 3-prong outlet.

WARNING! Do not remove transit bolts before installation. Ensure water connections are tight to prevent leaks.

First-Time Setup

After installation, run initial setup cycle.

  1. Connect power: Plug into electrical outlet.
  2. Open water taps: Turn on both hot and cold water supply.
  3. Run cleaning cycle: Select Drum Clean program and run without laundry.
  4. Set preferences: Configure default settings via control panel.
  5. Test operation: Run quick wash cycle to verify proper function.

CAUTION! Ensure machine is properly leveled to prevent vibration and noise during operation.

Specifications

Controls and Settings

Control Panel: Power Button, Program Selector, Temperature Setting, Spin Speed Setting, Start/Pause Button, Delay Start, Child Lock.

Program Selection: Rotate program selector to choose wash cycle. Temperature Setting: Adjust water temperature (Cold, 30°C, 40°C, 60°C, 90°C). Spin Speed: Select spin speed (No Spin, 400, 600, 800, 1000, 1200, 1400 RPM). Options: Pre-wash, Extra Rinse, Delay Start (1-19 hours).

Display: Shows selected program, remaining time, temperature, spin speed, and active options.

Connecting Utilities

Water Connections: Hot and cold water inlets at rear. Drain: Drain hose connection. Electrical: Standard power cord.

  1. Water supply: Connect to household water lines using provided hoses.
  2. Drain: Position drain hose securely in standpipe or over sink edge.
  3. Electrical: Plug into grounded outlet matching machine specifications.

Tip: Use hose brackets provided to secure water connections and prevent leaks.

Operating the Washer

Follow these steps for normal operation.

  1. Load laundry: Open door, load clothes evenly around drum.
  2. Add detergent: Pour into appropriate dispenser compartments.
  3. Select program: Choose wash cycle based on fabric type.
  4. Set options: Adjust temperature, spin speed, and additional features.
  5. Start cycle: Press Start/Pause button to begin washing.
  6. Unload: Wait for door lock to release, remove clean laundry.

WARNING! Do not overload machine. Maximum capacity is 7kg dry weight.

Safety Features

Child Lock: Press and hold Child Lock button for 3 seconds to activate/deactivate. Door Lock: Automatic locking during operation. Overflow Protection: Automatic shut-off if water level is too high. Imbalance Detection: Automatically redistributes load if unbalanced.

Care & Maintenance

Regular maintenance ensures optimal performance and longevity.

  1. Clean detergent dispenser: Remove monthly and rinse thoroughly.
  2. Clean door seal: Wipe rubber gasket to remove residue and prevent mold.
  3. Run drum clean: Use Drum Clean program monthly with专用 cleaner.
  4. Check filters: Clean drain pump filter every 3 months.
  5. Exterior cleaning: Wipe with damp cloth; avoid harsh chemicals.

CAUTION! Unplug machine before performing any maintenance. Do not use abrasive cleaners.

Regulatory Information

CE Certified: Complies with European safety standards. Energy Label: A+++ rating according to EU regulations. RoHS Compliant: Free of hazardous substances. For support, visit www.lg.com or contact LG Customer Service at 0344 844 3896.

Troubleshooting

SymptomPossible CauseCorrective Action
Machine won't startPower/doorCheck power connection; ensure door is properly closed.
No water intakeWater supply/tapsCheck water taps are open; inspect hoses for kinks.
Water doesn't drainDrain hose/filterCheck drain hose position; clean drain pump filter.
Excessive vibrationLeveling/loadEnsure machine is level; redistribute unbalanced load.
Door won't openWater/lockWait for lock to release; ensure water has drained completely.
Error codes displayedVarious faultsRefer to error code chart in manual; reset machine.

Reset: Unplug for 1 minute, then restart if experiencing issues.

Service: 0344 844 3896; www.lg.com/uk/support

LG Front Loading Washing Machine WM 3001 HRN Manual © - All Rights Reserved 2025