LG Front-Load Washing Machine Service Manual

The LG Front-Load Washing Machine is a high-efficiency laundry appliance featuring multiple wash programs, energy-saving technologies, smart diagnostics, direct drive motor system, steam cleaning options, turbo wash technology, child lock, delay start, and various fabric care settings. Below are key sections for safety, features, installation, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Utilities 7. Operating Procedures 8. Maintenance Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Direct Drive Motor, Control Panel, Door Assembly, Detergent Dispenser, Drain Pump, Water Inlet Valves, Shock Absorbers.

Feature	Description
Direct Drive Motor	Direct connection to drum for quiet operation and durability
Control Panel	Digital display with touch controls and program selection
Door Assembly	Front-loading glass door with safety lock
Detergent Dispenser	Multiple compartments for detergent, softener, and bleach
Drain Pump	Automatic water drainage system
Water Inlet Valves	Hot and cold water connections
Shock Absorbers	Vibration reduction during spin cycles
POWER	Turns washer on/off
START/PAUSE	Initiates or pauses wash cycle
PROGRAM SELECT	Chooses wash programs and settings

Installation

Unpack and inspect contents. Place on level surface.

Remove shipping bolts: Use wrench to remove rear transit bolts and install plastic caps.
Connect water supply: Attach hot and cold water hoses to corresponding valves.
Connect drain hose: Secure drain hose to standpipe or sink.
Level the machine: Adjust leveling feet to ensure stability.
Plug into electrical outlet.

WARNING! Machine is heavy; use proper lifting techniques. Ensure all connections are secure before operation.

First-Time Setup

Power on washer; follow initial setup procedure.

Run test cycle: Select quick wash cycle without laundry to clean interior.
Set preferences: Configure default settings like temperature, spin speed.
Load detergent: Fill dispenser compartments appropriately.
Test operation: Run short cycle to verify proper function.

CAUTION! Ensure machine is level and all shipping materials removed before first use.

Specifications

Capacity: 4.5 cu.ft. front-load washer
Motor Type: Direct Drive Inverter Motor
Wash Programs: Normal, Heavy Duty, Delicates, Quick Wash, Steam Refresh
Spin Speeds: 400-1400 RPM adjustable
Water Connections: Hot and cold water inlet
Energy Rating: ENERGY STAR certified
Dimensions: 27" W x 39" H x 30" D
Power Requirements: 120V AC, 60Hz

Controls and Settings

Access settings via control panel. Main Controls: POWER, START/PAUSE, PROGRAM SELECT, OPTIONS.

Display: Cycle time remaining, selected program, temperature, spin speed, options selected.

Programs: COTTON, SYNTHETIC, DELICATE, WOOL, QUICK WASH, STEAM, ALLERGEN. Options: TEMPERATURE (Cold, Warm, Hot), SPIN SPEED (No Spin, Low, Medium, High), EXTRA RINSE, PRE WASH, DELAY START. Settings: CHILD LOCK, SOUND ON/OFF, DEFAULT SETTINGS.

Connecting Utilities

Water Supply: Hot and cold water connections. Drain: Standpipe or sink connection. Electrical: Standard outlet.

Turn off water supply before connecting hoses.
Use only approved hoses and ensure tight connections.
Secure drain hose at proper height (minimum 24", maximum 96").
Plug into grounded electrical outlet.

Tip: Install drip pan and check for leaks after connection.

Operating Procedures

Supports various fabric types and soil levels.

Load laundry: Open door, load clothes evenly around drum.
Add detergent: Pour into appropriate dispenser compartment.
Select program: Choose based on fabric type and soil level.
Set options: Adjust temperature, spin speed, and additional features.
Start cycle: Press START; machine will lock door and begin.
Monitor progress: Display shows time remaining and current stage.
Unload: Wait for door lock to release, remove clean laundry.

WARNING! Do not overload machine. Balance load for optimal performance.

Maintenance Features

Self-Clean Cycle: Run monthly to clean drum and remove residue. Tub Clean: Special cycle for deep cleaning. Error Codes: Display shows diagnostic codes for service issues.

Care & Cleaning

Unplug before cleaning. Wipe exterior with damp cloth. Clean detergent dispenser monthly. Run tub clean cycle regularly.

CAUTION! Do not use abrasive cleaners. Keep control panel dry during cleaning.

Regulatory Information

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine won't start	Power/door	Check power connection; ensure door fully closed; reset circuit breaker.
No water filling	Water supply/valves	Verify water valves open; check hoses for kinks; clean inlet filters.
Excessive vibration	Leveling/load	Re-level machine; redistribute unbalanced load; remove shipping bolts.
Water not draining	Drain hose/pump	Check drain hose for obstructions; clean pump filter; ensure proper height.
Error codes displayed	System faults	Refer to error code chart in manual; reset machine; call service if persistent.

Reset: Unplug for 5 minutes to reset electronic controls.

Service: 1-800-243-0000; www.lg.com