LG Fridge Ice Maker Manual

The LG Fridge Ice Maker is an advanced ice making system with automatic ice production, multiple ice cube sizes, water filtration, self-cleaning function, ice level monitoring, and energy-saving modes. Features include quick ice making, child lock, filter replacement indicator, and compatibility with various LG refrigerator models. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water Supply 7. Ice Making Operation 8. Maintenance Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Ice maker assembly, water filter system, ice storage bin, control panel, water supply connection, ice level sensor.

Feature	Description
Ice Production Rate	Up to 4 lbs of ice per day
Ice Cube Sizes	Small, Medium, Large options
Water Filtration	Built-in water filter system
Ice Level Monitor	Automatically stops ice production when bin is full
Quick Ice Function	Accelerated ice making mode
Self-Cleaning	Automatic cleaning cycle
Child Lock	Prevents accidental setting changes
Filter Indicator	Alerts when filter needs replacement
Energy Saver Mode	Reduces power consumption
Ice Type Selection	Cubed or crushed ice options

Installation

Unpack and inspect contents. Ensure refrigerator is properly positioned.

Connect water supply: Turn off main water valve, connect water line to refrigerator inlet.
Install water filter: Remove filter cover, insert new filter, twist to lock.
Prime water system: Run water through dispenser for 3-5 minutes to remove air.
Activate ice maker: Ensure ice maker switch is in ON position.

WARNING! Ensure water connections are tight to prevent leaks. Use only approved water lines.

First-Time Setup

Power on refrigerator; follow initial setup procedure.

Select ice cube size: Press ICE SIZE button to choose Small, Medium, or Large.
Set ice type: Choose between cubed or crushed ice using ICE TYPE button.
Activate quick ice: Press QUICK ICE for faster ice production when needed.
Enable child lock: Press and hold CHILD LOCK for 3 seconds to activate.

CAUTION! Allow 24 hours for initial ice production. First batches may be discarded.

Specifications

Ice Production: Up to 4 lbs per day
Storage Capacity: 3-5 lbs ice bin
Water Filter: LT1000P or compatible
Filter Life: 6 months or 300 gallons
Power Requirements: 120V AC, 60Hz
Water Pressure: 20-120 psi required
Ice Types: Cubed, Crushed
Cube Sizes: Small, Medium, Large
Operating Temp: 34°F to 110°F

Controls and Settings

Access controls via front panel display or remote control (if applicable).

Control Panel: POWER, ICE SIZE, ICE TYPE, QUICK ICE, CHILD LOCK, FILTER RESET, CLEAN.

Ice Settings: Cube size selection, ice type (cubed/crushed), quick ice mode. Maintenance: Filter reset indicator, self-cleaning cycle, child lock activation. Display: Ice production status, filter life indicator, error codes.

Connecting Water Supply

Water inlet connection: 1/4" compression fitting. Filter housing: Twist-lock design.

Turn off main water supply before connecting.
Use only FDA-approved water line materials.
Ensure water pressure is between 20-120 psi.
Flush system for 3-5 minutes after installation.

Tip: Check for leaks at all connection points after installation.

Ice Making Operation

Automatic ice production cycle with sensor-based operation.

Normal operation: Ice maker automatically produces ice when bin level is low.
Quick ice mode: Press QUICK ICE for accelerated production.
Ice dispensing: Press ice lever or button to dispense ice.
Ice type selection: Switch between cubed and crushed ice as needed.
Bin full detection: Automatic shutoff when storage bin is full.
Production monitoring: LED indicator shows ice making status.

WARNING! Do not force ice dispenser if jammed. Turn off unit and clear obstruction.

Maintenance Features

Filter Replacement: Indicator light alerts when filter needs changing (every 6 months). Self-Cleaning: Automatic cleaning cycle removes mineral buildup. Ice Bin Cleaning: Removable bin for easy cleaning.

Care & Cleaning

Unplug refrigerator before cleaning ice maker components. Use mild detergent and warm water for cleaning. Never use abrasive cleaners.

CAUTION! Do not use sharp objects to remove ice buildup. Use warm water only.

Regulatory Information

UL Listed: Complies with UL standard 60335-2-24. Energy Star: Meets energy efficiency guidelines. NSF Certified: Food safety certification. For support, visit www.lg.com or contact 1-800-243-0000.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No ice production	Water supply/switch	Check water supply valve; ensure ice maker switch is ON; verify water filter installation.
Small or hollow ice cubes	Water pressure/filter	Check water pressure; replace water filter; ensure proper water flow.
Ice tastes or smells bad	Old filter/contamination	Replace water filter; flush system; check water source quality.
Ice maker leaking	Connections/valve	Tighten water connections; check inlet valve; inspect water lines.
Ice dispenser jammed	Ice blockage	Turn off ice maker; clear ice jam; restart unit.

Reset: Unplug for 5 minutes then restart. Press FILTER RESET after filter replacement.

Service: 1-800-243-0000; www.lg.com