LG Flatron E2242T-BN Manual

The LG Flatron E2242T-BN is a 22-inch LED monitor with Full HD 1920x1080 resolution, 5ms response time, 250 cd/m² brightness, 1000:1 contrast ratio, D-Sub and DVI-D inputs, Eco Mode for energy saving, F-Engine for enhanced picture quality, 4:3/16:9 aspect ratio support, OnScreen Control, and wall mount capability. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Display Modes 8. Energy Saving Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: LED panel with F-Engine technology, OnScreen Control, Power button, Menu navigation buttons, D-Sub and DVI-D inputs.

Feature	Description
Screen Size	22-inch LED display
Resolution	1920x1080 Full HD
Response Time	5ms
Brightness	250 cd/m²
Contrast Ratio	1000:1 (static)
Inputs	D-Sub (VGA), DVI-D
Aspect Ratio	16:9 (native), 4:3 supported
Power Consumption	Max 30W, Eco Mode 22W
Wall Mount	100x100mm VESA compatible
Tilt	-5° to 15°

Installation

Unpack and inspect contents. Place on stable surface.

Attach base: Align base with monitor neck and secure with provided screw.
Connect video cable: Use D-Sub or DVI-D cable to connect to computer.
Connect power: Plug power cord into monitor and wall outlet.
Adjust tilt: Set comfortable viewing angle (-5° to 15°).

WARNING! Monitor is fragile; handle with care to avoid screen damage. Ensure all connections are secure.

First-Time Setup

Power on monitor; adjust settings as needed.

Select input source: Press AUTO/SELECT button to choose between D-Sub and DVI-D.
Auto adjust: Press AUTO/SELECT for 2 seconds to auto-configure display settings.
Adjust brightness/contrast: Use MENU button to access picture settings.
Set resolution: Ensure computer output is set to 1920x1080 for optimal display.

CAUTION! Ensure stable surface; avoid direct sunlight on screen.

Specifications

Screen Size: 22 inches LED.
Panel Type: TN
Resolution: 1920x1080 Full HD
Brightness: 250 cd/m²
Contrast Ratio: 1000:1
Response Time: 5ms
Viewing Angles: 170° horizontal, 160° vertical
Inputs: D-Sub (VGA), DVI-D
Power Consumption: 30W max, 22W Eco Mode, <1W standby
Dimensions: 512.2 x 383.5 x 205mm (with stand)

Controls and Settings

Access OSD via MENU button. Front Panel: Power button, MENU, AUTO/SELECT, +/- buttons.

OSD Menu: PICTURE (Brightness, Contrast, Gamma), DISPLAY (Auto Config, H Position, V Position), SETUP (Language, Transparency, Reset).

Picture Settings: Brightness, Contrast, Gamma (1.8, 2.0, 2.2, 2.4). Display Settings: Auto Config, H Position, V Position, Clock, Phase. Setup: Language selection, OSD transparency, Reset to factory defaults.

Connecting Devices

D-Sub (VGA): Analog connection for computers. DVI-D: Digital connection for better image quality.

Turn off monitor and computer before connecting.
Match cables to ports (D-Sub to D-Sub, DVI-D to DVI-D).
Select input source using AUTO/SELECT button.
Run Auto Config for optimal display settings.

Tip: Use DVI-D connection for sharper image quality and better color reproduction.

Display Modes

Supports various display modes and aspect ratios.

Wide Mode: 16:9 native aspect ratio for widescreen content.
4:3 Mode: For traditional content, displays with black bars on sides.
Custom Mode: User-defined settings for specific applications.
Eco Mode: Reduces brightness to save energy.
F-Engine: Enhances picture quality through dynamic contrast.

WARNING! Do not use sharp objects on screen surface. Avoid pressing hard on display.

Energy Saving Features

Eco Mode: Reduces power consumption by adjusting brightness. Power Saving: Automatically enters standby when no signal detected.

Care & Cleaning

Unplug before cleaning. Use soft, dry cloth only; no liquids or chemical cleaners.

CAUTION! Do not spray liquids directly on screen; use only approved cleaning solutions if necessary.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © LG Electronics; trademarks of LG Electronics. Energy Star compliant. For support, visit www.lg.com or contact LG customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Power cord connection	Check power cord connection; ensure outlet is working.
No display	Input source/cables	Check input source selection; ensure cables are properly connected.
Blurry image	Resolution/Auto Config	Set correct resolution (1920x1080); run Auto Config.
Color issues	Cable/OSD settings	Check cable connections; adjust color settings in OSD.
Flickering	Refresh rate/cables	Set refresh rate to 60Hz; check cable quality and connections.

Reset: Menu > Setup > Reset to restore factory settings.

Service: Contact LG customer support; www.lg.com