LG Flatron E2211 Manual

The LG Flatron E2211 is a 22-inch LCD monitor with 1680x1050 resolution, 5ms response time, 1000:1 contrast ratio, D-Sub and DVI-D inputs, HDCP support, 170°/160° viewing angles, built-in speakers, Eco Mode for power saving, f-ENGINE for image enhancement, and 4:3 in Wide compatibility. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. On-Screen Display 8. Special Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: 22-inch LCD panel, Power button, Menu controls, D-Sub input, DVI-D input, Audio input, Headphone jack, Built-in speakers.

Feature	Description
Screen Size	22-inch widescreen LCD
Resolution	1680 x 1050 (WSXGA+)
Response Time	5ms
Contrast Ratio	1000:1
Inputs	D-Sub, DVI-D
HDCP Support	Yes
Built-in Speakers	1W x 2
Viewing Angles	170° horizontal, 160° vertical
Power Button	Turns monitor on/off
Menu Button	Accesses OSD controls

Installation

Unpack and inspect contents. Place on stable surface.

Connect video cable: Use D-Sub or DVI-D cable to connect to computer.
Connect audio cable: Use 3.5mm audio cable for built-in speakers.
Connect power cord: Plug into AC power outlet.
Attach base: Secure monitor to stand base.

WARNING! Monitor is heavy; lift with care to avoid injury. Ensure all connections are secure.

First-Time Setup

Power on monitor; adjust settings as needed.

Select input source: Press AUTO/SELECT button to choose D-Sub or DVI-D.
Auto adjust: Press AUTO/SELECT for automatic image optimization.
Adjust brightness/contrast: Use OSD menu for optimal viewing.
Set resolution: Ensure computer output is set to 1680x1050.

CAUTION! Ensure stable surface; avoid placing near heat sources.

Specifications

Screen Size: 22 inches LCD.
Native Resolution: 1680 x 1050.
Brightness: 300 cd/m².
Response Time: 5ms.
Contrast Ratio: 1000:1.
Input Connectors: D-Sub, DVI-D.
Audio: Built-in speakers (1W x 2), audio input, headphone jack.
Power Consumption: 45W typical, <1W standby.
Dimensions: 20.1" x 15.9" x 8.3".

Controls and Settings

Access OSD via MENU button. Front Panel: Power, Menu, Auto/Select, Volume controls.

OSD Menu: Brightness, Contrast, Color, Picture Adjust, Input Select, Setup, Reset.

Picture: Brightness, Contrast, Sharpness, Color Temperature. Audio: Volume control, mute. Setup: Language selection, OSD position, transparency. Special: f-ENGINE, Eco Mode, 4:3 in Wide.

Connecting Devices

Computer: D-Sub or DVI-D. Audio: 3.5mm audio input for speakers.

Turn off monitor and computer before connecting.
Match cables to ports (D-Sub for analog, DVI-D for digital).
Select input source via AUTO/SELECT button.
Connect audio cable for sound output.

Tip: Use DVI-D connection for best image quality.

On-Screen Display

Access OSD by pressing MENU button.

Brightness/Contrast: Adjust screen luminance and contrast levels.
Color: Set color temperature (Cool, Medium, Warm) or custom RGB.
Picture Adjust: Fine-tune position, phase, sharpness.
Input Select: Choose between D-Sub and DVI-D inputs.
Setup: Language, OSD position, transparency, reset.
Special: f-ENGINE on/off, Eco Mode settings.

Note: Use AUTO/SELECT for quick optimization.

Special Features

f-ENGINE: Enhances image quality and clarity. Eco Mode: Reduces power consumption. 4:3 in Wide: Displays 4:3 content properly on widescreen.

Care & Cleaning

Unplug before cleaning. Use soft, dry cloth; for stubborn stains, use water-dampened cloth. Never use chemicals or solvents.

CAUTION! Do not spray liquids directly on screen; avoid abrasive materials.

Regulatory Information

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Power cord	Check power connection; ensure outlet is working.
No image	Input source/cables	Check input selection; verify cable connections; try different input.
Image blurry	Resolution/settings	Set correct resolution (1680x1050); use AUTO adjust.
No sound	Audio connections	Check audio cable; ensure volume not muted; verify computer audio settings.
Color issues	Settings/cable	Check color settings; try different cable; reset to factory defaults.

Reset: Menu > Setup > Reset to restore factory settings.

Service: 1-800-243-0000; www.lg.com