LG Flatron E1942 Manual

The LG Flatron E1942 is a 19-inch LED monitor with 1366x768 resolution, 16:9 aspect ratio, 5ms response time, 2000000:1 dynamic contrast ratio, D-Sub and DVI-D inputs, Eco Mode for energy saving, F-Engine for enhanced picture quality, and customizable display settings. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Display Settings 8. Energy Saving Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: LED panel with F-Engine technology, Power button, Menu controls, D-Sub input, DVI-D input, Power connector.

Feature	Description
Power button	Turns monitor on/off
Menu button	Accesses OSD menu
Auto button	Auto-adjusts display settings
D-Sub input	For analog VGA connection
DVI-D input	For digital video connection
Power connector	For power cable connection
Eco Mode	Reduces power consumption
F-Engine	Enhances picture quality
Response Time	5ms for smooth motion
Aspect Ratio	16:9 widescreen

Installation

Unpack and inspect contents. Place on stable surface.

Connect video source: Use D-Sub or DVI-D cable to connect to computer.
Connect power: Attach power cable to monitor and wall outlet.
Secure connections: Ensure all cables are firmly connected.
Power on: Press power button to turn on monitor.

WARNING! Monitor is fragile; handle with care to avoid damage. Ensure stable surface placement.

First-Time Setup

Power on monitor; follow on-screen prompts if available.

Auto-adjust display: Press AUTO button for optimal settings.
Access OSD menu: Press MENU button to customize settings.
Set input source: Use INPUT SELECT in menu to choose D-Sub or DVI-D.
Adjust brightness/contrast: Use PICTURE menu for optimal viewing.

CAUTION! Ensure proper ventilation; avoid blocking air vents.

Specifications

Screen Size: 19 inches LED.
Resolution: 1366x768 pixels.
Aspect Ratio: 16:9.
Response Time: 5ms.
Contrast Ratio: 2000000:1 (Dynamic).
Inputs: D-Sub, DVI-D.
Power Consumption: <20W (Operation), <0.5W (Standby).
Viewing Angle: 90°/65° (Horizontal/Vertical).
Brightness: 250 cd/m².

Controls and Settings

Access OSD via MENU button. Front Panel: POWER, MENU, AUTO, +/- buttons.

OSD Menu: PICTURE (Brightness, Contrast, Sharpness), DISPLAY (Horizontal/Vertical Position, Phase, Clock), COLOR (Color Temperature, Gamma), SETUP (Language, Input Select, Reset).

Picture: Brightness, Contrast, Sharpness, Gamma. Color: 6500K, 9300K, User color temperature. Display: Auto configure, H-Position, V-Position, Phase, Clock. Setup: Language selection, Input select, OSD position, Reset to factory defaults.

Connecting Devices

Computer: D-Sub (analog) or DVI-D (digital) connection.

Turn off monitor and computer before connecting.
Match cables to ports (D-Sub to VGA, DVI-D to DVI).
Select input source via OSD menu INPUT SELECT.
Power on devices in sequence: computer first, then monitor.

Tip: Use DVI-D connection for better image quality.

Display Settings

Customize display through OSD menu.

Brightness/Contrast: Adjust in PICTURE menu for comfortable viewing.
Color Temperature: Choose 6500K (warm) or 9300K (cool) in COLOR menu.
Position/Size: Adjust H-Position, V-Position, Phase, Clock in DISPLAY menu.
Sharpness: Set image sharpness level in PICTURE menu.
Gamma: Adjust gamma curve for different content types.
Reset: Restore factory defaults in SETUP menu if needed.

WARNING! Avoid extreme brightness settings to prevent eye strain.

Energy Saving Features

Eco Mode: Reduces power consumption by adjusting brightness. Auto Power Off: Turns off monitor after specified idle time. Standby Mode: Low power consumption when no signal detected.

Care & Cleaning

Unplug before cleaning. Use soft, dry cloth for screen; mild cleaner for cabinet if needed.

CAUTION! Do not use alcohol or ammonia-based cleaners; avoid pressure on screen surface.

Regulatory Information

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Power cable	Check power connection; ensure outlet is working.
No display	Input source/cables	Check input selection; verify cable connections; try different source.
Blurry image	Resolution/settings	Set correct resolution (1366x768); press AUTO button.
Color issues	Cable/color settings	Check cable connections; adjust color temperature in OSD.
Flickering	Refresh rate/cables	Set refresh rate to 60Hz; check cable quality and connections.

Reset: SETUP menu > Reset All to restore factory settings.

Service: Contact LG customer support or visit www.lg.com