lg f1496ad manual

The LG F1496AD is a high-performance washing machine with advanced features including multiple wash programs, energy-efficient operation, digital display, child lock, delay start, and spin speed adjustments. Designed for household use with capacity for standard laundry loads. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: Digital control panel, multiple wash programs, LED display, child lock feature, delay start timer, variable spin speeds.

Feature	Description
Digital Control Panel	Touch-sensitive buttons with LED indicators
Wash Programs	Cotton, Synthetic, Delicate, Quick Wash, etc.
Spin Speed Control	Adjustable from 400 to 1200 RPM
Delay Start	Program start delay up to 24 hours
Child Lock	Prevents accidental program changes
Energy Efficiency	A+++ rating for reduced power consumption
Water Protection	Anti-leak system with automatic shutoff
Door Lock	Automatic locking during operation
Display	LED showing time remaining and program status
Temperature Control	Cold to 90°C water temperature options

Installation

Unpack and inspect contents. Place on level, stable surface.

1. Remove transit bolts: Use wrench to remove all transit bolts from rear.
2. Connect water supply: Attach hot and cold water hoses to corresponding inlets.
3. Connect drain hose: Position drain hose properly to avoid siphoning.
4. Plug into grounded electrical outlet.
5. Level the machine: Adjust feet until machine is perfectly level.

WARNING! Do not remove transit bolts before installation. Ensure water connections are tight to prevent leaks.

First-Time Setup

Power on washing machine; follow initial setup procedure.

1. Run initial test cycle: Select cotton program at 60°C without laundry.
2. Set language: Use settings menu to select preferred language.
3. Configure default settings: Set temperature, spin speed preferences.
4. Activate child lock if needed: Press and hold child lock button for 3 seconds.

CAUTION! Ensure machine is level before first use to prevent vibration and noise.

Specifications

• Capacity: 9 kg maximum load
• Energy Rating: A+++
• Spin Speed: 400-1200 RPM adjustable
• Programs: 15 automatic wash programs
• Dimensions: 85cm H x 60cm W x 55cm D
• Water Pressure: 0.5-10 bar operating range
• Power Supply: 220-240V, 50Hz
• Noise Level: 55 dB during wash, 75 dB during spin
• Weight: 70 kg

Controls and Settings

Access settings via control panel buttons. Main controls: POWER, PROGRAM SELECTION, TEMPERATURE, SPIN SPEED, START/PAUSE.

Display Indicators: Program time remaining, temperature setting, spin speed, child lock status, delay start time.

Program Selection: Cotton, Synthetic, Delicate, Wool, Quick Wash, Eco, Sport, Baby Care, Allergy, Rinse+Spin, Drain, Self Clean. Temperature Settings: Cold, 20°C, 30°C, 40°C, 60°C, 90°C. Spin Speed: Rinse Hold, 400, 600, 800, 1000, 1200 RPM. Options: Pre-wash, Extra Rinse, Delay Start, Child Lock.

Connecting Water Supply

Hot and cold water inlets with automatic temperature mixing.

1. Turn off water supply before connecting hoses.
2. Connect blue-marked hose to cold water inlet.
3. Connect red-marked hose to hot water inlet (if available).
4. Ensure hose connections are tight but not over-tightened.
5. Position drain hose properly in standpipe or sink.

Tip: Check for leaks after initial connection by running short test cycle.

Operating Programs

Select appropriate program for laundry type and soil level.

1. Load laundry: Open door, load items evenly around drum.
2. Add detergent: Use detergent drawer compartments as marked.
3. Select program: Turn program selector to desired setting.
4. Adjust settings: Set temperature, spin speed, and additional options.
5. Start cycle: Press START/PAUSE button to begin washing.
6. Monitor progress: Display shows time remaining and current phase.
7. Complete cycle: Machine beeps when cycle finishes; remove laundry promptly.

WARNING! Do not overload machine. Balance load evenly for optimal performance.

Safety Features

Child Lock: Prevents program changes during operation. Door Lock: Automatic locking during wash cycles. Overflow Protection: Automatic water level monitoring. Imbalance Detection: Stops spin cycle if load is unbalanced.

Care & Cleaning

Regular maintenance ensures optimal performance and longevity.

1. Clean detergent drawer monthly: Remove and rinse under warm water.
2. Clean door seal: Wipe rubber gasket to remove residue and prevent mold.
3. Run self-clean cycle: Use monthly with machine empty to clean drum.
4. Clean filter: Access and clean pump filter every 3 months.

CAUTION! Unplug machine before cleaning. Use only mild, non-abrasive cleaners.

Regulatory Information

CE certified: Complies with European safety standards. Energy Label: A+++ rating according to EU regulations. RoHS compliant: Free of hazardous substances. WEEE compliant: Proper disposal instructions included. For support, visit www.lg.com or contact LG customer service at local service center.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine won't start	Power/door	Check power connection; ensure door is properly closed.
No water intake	Water supply/taps	Check water taps are open; inspect hoses for kinks.
Excessive vibration	Leveling/load	Ensure machine is level; redistribute unbalanced load.
Water not draining	Drain hose/filter	Check drain hose position; clean pump filter.
Error codes displayed	Various faults	Consult error code list in manual; reset machine.
Poor washing results	Detergent/program	Use correct detergent amount; select appropriate program.

Reset: Unplug for 5 minutes then restart if experiencing issues.

Service: Contact authorized LG service center for technical support.