LG F1403RD6 Manual

The LG F1403RD6 is a high-performance front-loading washing machine with 8kg capacity, Direct Drive motor technology, 6 Motion DD technology, multiple wash programs, energy efficiency rating, steam function, child lock, delay start, and smart diagnosis features. Below are key sections for safety, features, installation, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Wash Programs 7. Daily Operation 8. Maintenance & Cleaning 9. Safety Features 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Direct Drive motor, LED display, control panel, detergent dispenser, door lock, water inlet valves, drain pump.

FeatureDescription
Direct Drive MotorDirect connection to drum for quiet operation and durability
6 Motion DD TechnologySix different wash motions for optimal cleaning
Steam FunctionRemoves allergens and reduces wrinkles
Smart DiagnosisAutomatically diagnoses issues via sound analysis
Child LockPrevents accidental program changes
Delay StartProgram start time up to 19 hours
LED DisplayShows remaining time and current cycle
Energy EfficiencyA+++ rating for energy savings
Water Inlet ValvesHot and cold water connections
Drain PumpAutomatic water drainage system

Installation

Unpack and inspect contents. Place on level floor.

  1. Remove transit bolts: Use wrench to remove four bolts from rear.
  2. Connect water supply: Attach hot and cold water hoses to corresponding valves.
  3. Connect drain hose: Place in standpipe or sink (max height 100cm).
  4. Level the machine: Adjust front feet until machine is stable.
  5. Plug into grounded electrical outlet.

WARNING! Do not operate without removing transit bolts. Ensure water connections are tight to prevent leaks.

First-Time Setup

Power on machine; follow initial setup procedure.

  1. Run initial cycle: Select Cotton program at 90°C without laundry.
  2. Set preferences: Configure default settings in OPTIONS menu.
  3. Test functions: Verify all wash programs and features work properly.
  4. Activate child lock: Press and hold Child Lock button for 3 seconds.

CAUTION! Ensure machine is level before first use to prevent vibration.

Specifications

Controls and Settings

Access functions via control panel. Main buttons: POWER, START/PAUSE, PROGRAM SELECTION, OPTIONS, CHILD LOCK.

Display: Shows program time, temperature, spin speed, and options selected.

Temperature Settings: Cold, 20°C, 30°C, 40°C, 60°C, 90°C. Spin Speed: No Spin, 400, 600, 800, 1000, 1200, 1400 RPM. Options: Pre Wash, Extra Rinse, Steam, Delay Start, Night Mode.

Wash Programs

Available programs for different fabric types and soil levels.

  1. Cotton: For cotton and linen (40°C-90°C)
  2. Synthetic: For synthetic fabrics (40°C-60°C)
  3. Delicate: For delicate items (cold-40°C)
  4. Wool: For wool and hand-wash items (cold-30°C)
  5. Quick 30: Fast wash for lightly soiled items
  6. Sportswear: For athletic clothing
  7. Allergy Care: Steam function for allergen removal
  8. Rinse+Spin: Additional rinse and spin cycle
  9. Spin Only: Drain and spin only
  10. Drum Clean: Self-cleaning cycle

Daily Operation

Step-by-step guide for normal washing.

  1. Sort laundry by color and fabric type.
  2. Load machine: Do not exceed maximum capacity.
  3. Add detergent: Use dispenser compartments (I: pre-wash, II: main wash, *: softener).
  4. Select program: Turn program selector to desired cycle.
  5. Set options: Adjust temperature, spin speed, and additional features.
  6. Start cycle: Press START/PAUSE button.
  7. Remove laundry promptly after cycle completion.

Tip: Leave door slightly open between cycles to prevent odors.

Maintenance & Cleaning

Regular maintenance ensures optimal performance.

  1. Clean detergent dispenser: Remove monthly and wash under running water.
  2. Clean door seal: Wipe rubber gasket to remove residue and moisture.
  3. Run Drum Clean: Monthly using special detergent or 90°C cotton cycle.
  4. Clean drain pump filter: Every 2-3 months or when drainage issues occur.
  5. Wipe exterior: Use damp cloth with mild detergent.

CAUTION! Unplug machine before cleaning. Do not use abrasive cleaners.

Safety Features

Built-in safety mechanisms for user protection.

Regulatory Information

CE certified: Complies with European safety standards. Energy Label: A+++ according to EU Regulation 1061/2010. Water efficiency: Meets EU water consumption standards. Copyright © 2023 LG Electronics. For support, visit www.lg.com or contact LG Customer Service at 0344 847 5454.

Troubleshooting

SymptomPossible CauseCorrective Action
Machine won't startPower/doorCheck power connection; ensure door is properly closed.
No water intakeWater supplyCheck water taps are open; inspect hoses for kinks.
Water not drainingDrain filter/hoseClean drain pump filter; check drain hose for blockages.
Excessive vibrationLeveling/transit boltsEnsure machine is level; check transit bolts removed.
Error codes displayedVarious issuesUse Smart Diagnosis; refer to error code chart in manual.
Door won't openWater/door lockWait for door lock to release; ensure water is drained.

Reset: Unplug for 1 minute then restart.

Service: 0344 847 5454; www.lg.com/uk/support

LG F1403RD6 Manual © - All Rights Reserved 2025