LG F1403FD Manual

The LG F1403FD is a front-loading washing machine with advanced features including Direct Drive technology, TurboWash for faster cleaning, 6 Motion DD technology for optimal fabric care, steam function for hygiene, multiple wash programs, energy efficiency rating, child lock, delay start, and digital display. Below are key sections for safety, features, installation, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Direct Drive motor, digital control panel, LED display, detergent dispenser, door lock, water inlet valves, drain pump.

Feature	Description
Direct Drive Motor	Direct connection for quieter operation and longer lifespan
TurboWash	Reduces wash time while maintaining cleaning performance
6 Motion DD Technology	Six different wash motions for optimal fabric care
Steam Function	Removes allergens and reduces wrinkles
Energy Efficiency	A+++ rating for reduced power consumption
Child Lock	Prevents accidental program changes
Delay Start	Program start up to 19 hours later
Digital Display	Shows remaining time and program status
Multiple Programs	Cotton, Synthetic, Delicate, Quick Wash, etc.
Load Capacity	8 kg maximum load capacity

Installation

Unpack and inspect contents. Place on level, solid floor.

1. Remove transit bolts: Use wrench to remove all four transit bolts from rear.
2. Connect water supply: Attach hot and cold water hoses to corresponding valves.
3. Connect drain hose: Secure drain hose to standpipe or sink.
4. Level the machine: Adjust front feet until machine is perfectly level.
5. Plug into grounded electrical outlet.

WARNING! Do not remove transit bolts before installation. Ensure water connections are tight to prevent leaks.

First-Time Setup

Plug in machine; perform initial setup.

1. Run empty cycle: Select Cotton program at 90°C without laundry.
2. Set language: Press and hold Temp and Spin buttons simultaneously for 3 seconds.
3. Test functions: Run short cycle to verify all functions work properly.
4. Program preferences: Set default temperature, spin speed, and other preferences.

CAUTION! Ensure machine is level and all connections are secure before first use.

Specifications

• Capacity: 8 kg
• Energy Rating: A+++
• Spin Speed: 1400 RPM maximum
• Water Consumption: Approx. 50 liters per cycle
• Dimensions: 600mm x 850mm x 550mm (WxHxD)
• Programs: Cotton, Synthetic, Delicate, Wool, Quick Wash, Steam Care
• Special Features: Child Lock, Delay Start, TurboWash, 6 Motion DD
• Power Supply: 220-240V, 50Hz
• Noise Level: 52 dB (washing), 72 dB (spinning)

Controls and Settings

Control Panel: POWER, PROGRAM SELECTION, TEMPERATURE, SPIN SPEED, OPTIONS, START/PAUSE.

Display: Shows selected program, remaining time, temperature, spin speed, and option indicators.

Program Selection: Rotate knob to select desired wash program. Temperature: 20°C, 30°C, 40°C, 60°C, 90°C, Cold. Spin Speed: 400, 600, 800, 1000, 1200, 1400 RPM, No Spin. Options: Pre Wash, Extra Rinse, Delay Start, TurboWash, Steam.

Connecting Utilities

Water Supply: Hot and cold water connections. Drain: Drain hose connection. Electrical: Grounded outlet.

1. Turn off water supply before connecting hoses.
2. Use only recommended hoses and fittings.
3. Ensure drain hose is not kinked or bent sharply.
4. Plug into dedicated grounded outlet.

Tip: Install water leak detector for additional safety.

Operating Programs

Supports various fabric types and soil levels.

1. Load laundry: Open door, load items evenly around drum.
2. Add detergent: Use appropriate compartment in dispenser.
3. Select program: Turn knob to desired wash program.
4. Adjust settings: Set temperature, spin speed, and options as needed.
5. Start cycle: Press START/PAUSE button.
6. Monitor progress: Display shows remaining time.
7. Remove laundry: Wait for door lock to release after cycle completes.

WARNING! Do not overload machine. Maximum capacity 8 kg.

Special Features

TurboWash: Reduces wash time by 30% while maintaining cleaning performance. Steam Function: Reduces allergens and wrinkles. 6 Motion DD: Six wash motions (Tumbling, Scrubbing, Rolling, Swing, Filtration, Stepping) for optimal cleaning. Child Lock: Press and hold Temp and Spin buttons for 3 seconds to activate.

Care & Maintenance

Regular cleaning ensures optimal performance and longevity.

1. Clean detergent dispenser monthly: Remove and rinse under running water.
2. Clean door seal: Wipe rubber seal to remove residue and prevent mold.
3. Run cleaning cycle: Use Tub Clean program monthly with machine cleaner.
4. Clean filter: Check and clean drain filter every 3 months.

CAUTION! Unplug machine before performing any maintenance.

Regulatory Information

CE certified. Complies with EU energy efficiency standards. Manufactured according to ISO 9001 quality standards. Copyright © 2023 LG Electronics. For support, visit www.lg.com or contact LG customer service at 0344 847 5454.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine won't start	Power/door	Check power connection; ensure door is properly closed.
No water intake	Water supply	Check water taps are open; inspect hoses for kinks.
Water doesn't drain	Drain filter	Clean drain filter; check drain hose for blockages.
Excessive vibration	Leveling/load	Check machine is level; redistribute load evenly.
Error codes displayed	Various faults	Refer to error code list in manual; reset machine.

Reset: Unplug for 1 minute, then restart.

Service: 0344 847 5454; www.lg.com/uk/support