LG E2411 Manual

The LG E2411 is a 24-inch LED monitor with Full HD 1920x1080 resolution, 16:9 aspect ratio, 5ms response time, D-Sub and DVI-D inputs, Eco Mode for energy savings, F-Engine for enhanced picture quality, 250 cd/m² brightness, 1000:1 contrast ratio (Dynamic Contrast Ratio 5,000,000:1), OnScreen Control software, and wall-mount capability. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. OnScreen Control 8. Eco Mode & Energy Saving 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: LED panel with slim bezel, Stand with tilt adjustment, Power button, Input selection, Menu navigation buttons.

Feature	Description
D-Sub (VGA) input	For analog computer connection
DVI-D input	For digital computer connection
Power connector	For AC power connection
Power button	Turns monitor on/off
Menu button	Accesses OSD menu
Auto/Source button	Auto-adjusts image; switches input sources
Eco Mode button	Quick access to energy saving modes
Tilt adjustment	-5° to 15° tilt range
Wall mount	100x100mm VESA compatible
F-Engine	Enhances picture quality and color

Installation

Unpack and inspect contents. Place on stable surface.

Attach stand: Align stand with monitor base and secure with provided screw.
Connect computer: Use D-Sub or DVI-D cable to connect to computer.
Connect power: Plug power cord into monitor and wall outlet.
Turn on: Press power button on monitor front.

WARNING! Monitor is fragile; handle with care to avoid damage. Ensure all connections are secure.

First-Time Setup

Power on monitor; follow on-screen prompts if available.

Select input source: Press SOURCE button to choose D-Sub or DVI-D.
Auto-adjust image: Press AUTO/SET button for optimal picture quality.
Access OSD menu: Press MENU button to adjust brightness, contrast, etc.
Set Eco Mode: Press ECO button to select energy saving level.

CAUTION! Ensure stable surface; avoid placing near heat sources.

Specifications

Screen Size: 24 inches LED.
Resolution: 1920x1080 Full HD.
Brightness: 250 cd/m².
Contrast Ratio: 1000:1 (DCR 5,000,000:1).
Response Time: 5ms.
Inputs: D-Sub, DVI-D.
Power Consumption: ≤30W operating, ≤0.5W standby.
Viewing Angle: 170° horizontal, 160° vertical.
Wall Mount: 100x100mm VESA.

Controls and Settings

Access OSD via MENU button. Front Panel: Power, Menu, Auto/Set, Source, Eco.

OSD Menu: PICTURE (Brightness, Contrast, Sharpness, Gamma), COLOR (Color Temp, Saturation), SETUP (Language, OSD Position, OSD Timeout), INPUT SELECT (D-Sub, DVI-D).

Picture: Brightness, Contrast, Sharpness, Gamma (1.8, 2.0, 2.2, 2.4). Color: Color Temp (Cool, Medium, Warm), Saturation. Setup: Language (ENGLISH default), OSD position, OSD timeout. Eco Mode: Off, 30%, 50%, 75%, 100% brightness reduction.

Connecting Devices

Computer: D-Sub or DVI-D connection.

Turn off monitor and computer before connecting.
Match cables to ports (D-Sub to D-Sub, DVI-D to DVI-D).
Select input via SOURCE button (D-Sub or DVI-D).
For optimal quality, use DVI-D connection.

Tip: Ensure monitor is off and unplugged before connecting cables.

OnScreen Control

LG OnScreen Control software for easy monitor settings management.

Download: Get software from LG website.
Install: Run installer on connected computer.
Use: Adjust screen split, brightness, input source via software interface.
Screen Split: Divide screen into multiple sections for multitasking.
Color Calibration: Fine-tune color settings for accurate display.

WARNING! Ensure compatible operating system before installation.

Eco Mode & Energy Saving

Eco Mode: Reduces power consumption by adjusting brightness levels (Off, 30%, 50%, 75%, 100%). Energy Star compliant. Auto Power Off: Turns monitor off after specified idle time.

Care & Cleaning

Unplug before cleaning. Use soft, dry cloth; for stubborn stains, use water-dampened cloth. Never use chemicals or abrasive materials.

CAUTION! Do not spray liquids directly on screen; avoid pressure on LCD panel.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Energy Star qualified. Copyright © LG Electronics; all rights reserved. For support, visit www.lg.com or contact LG customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Power connection	Check power cord connection; ensure outlet works.
No image	Input source/cables	Check input source selection; verify cable connections.
Image blurry	Resolution settings	Set computer to 1920x1080; press AUTO/SET button.
Colors incorrect	Color settings	Adjust color temperature in OSD menu.
Monitor flickers	Refresh rate	Set refresh rate to 60Hz; check cable quality.

Reset: OSD Menu > Setup > Reset All if available.

Service: Contact LG customer support; www.lg.com