LG Dryer TDC70045E Manual

The LG Dryer TDC70045E is a high-efficiency electric dryer with 7.3 cu. ft. capacity, featuring Sensor Dry technology, multiple drying cycles, steam refresh option, reversible door, LED display, child lock, end-of-cycle signal, and wrinkle care option. Operates on 240V power supply. Below are key sections for safety, features, installation, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Drying Cycles 7. Steam Functions 8. Care & Maintenance 9. Safety Features 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Large capacity drum, LED control panel, multiple sensors, steam nozzle, lint filter, reversible door, and exhaust vent.

FeatureDescription
Sensor Dry TechnologyAutomatically detects moisture levels for optimal drying
Steam RefreshReduces wrinkles and odors without washing
7.3 cu. ft. CapacityLarge drum for family-sized loads
Reversible DoorCan be configured for left or right opening
LED DisplayClear cycle status and time remaining
Multiple Drying CyclesCotton, Permanent Press, Delicates, Quick Dry
Child LockPrevents accidental cycle changes
Wrinkle Care OptionTumbles periodically after cycle to prevent wrinkles
End of Cycle SignalAudible alert when drying complete
Lint Filter IndicatorReminds to clean lint filter

Installation

Unpack and inspect contents. Place on level surface near electrical outlet and venting.

  1. Remove shipping materials: Remove all tapes, brackets, and foam protections.
  2. Level the dryer: Adjust leveling legs to ensure unit is stable and balanced.
  3. Electrical connection: Connect to dedicated 240V outlet with proper grounding.
  4. Venting installation: Connect 4-inch diameter metal vent duct to exterior.
  5. Gas connection (if applicable): For gas models, connect to gas supply line.

WARNING! Dryer is heavy; use two people for moving. Ensure proper ventilation to prevent fire hazard.

First-Time Setup

Connect power and follow initial setup procedure.

  1. Power on dryer: Plug into 240V outlet and press POWER button.
  2. Select language: Use control dial to set display language (default ENGLISH).
  3. Set time: Configure current time using TIME SET button.
  4. Test run: Run empty cycle to ensure proper operation.
  5. Configure preferences: Set end-of-cycle signal volume and default settings.

CAUTION! Ensure dryer is properly leveled and venting is secure before first use.

Specifications

Controls and Settings

Access functions via control panel. Main Controls: POWER, CYCLE SELECTOR, START/PAUSE, OPTIONS.

Display: Shows cycle time, settings, and status messages. Cycle Selector: Rotate to choose drying programs. Options Button: Access additional features like Wrinkle Care, Signal Volume, Child Lock.

Drying Settings: Temperature (High, Medium, Low, No Heat), Dryness Level (More Dry, Less Dry, Damp), Time Dry (10-180 minutes). Special Functions: Steam Refresh (20 minutes), Sanitary Steam (30 minutes), Delay Start (up to 12 hours).

Drying Cycles

Select appropriate cycle for fabric type and drying needs.

  1. Sensor Dry Cycles: Automatically adjust drying time based on moisture detection.
  2. Time Dry: Manual timing from 10 to 180 minutes.
  3. Quick Dry: Fast drying for small loads (30-45 minutes).
  4. Delicates: Gentle drying for delicate fabrics.
  5. Heavy Duty: Extended drying for heavy items like towels and jeans.
  6. Permanent Press: Reduces wrinkles with cool-down period.
  7. Air Fluff: No heat for fluffing pillows or refreshing items.
  8. Sanitary: High heat for sanitizing.

Tip: Use Sensor Dry cycles for energy efficiency and fabric protection.

Steam Functions

Steam technology reduces wrinkles and refreshes clothing.

  1. Steam Refresh: Add 1-2 cups water to steam reservoir, select Steam Refresh cycle.
  2. Steam Sanitary: Uses steam to sanitize and reduce allergens.
  3. Wrinkle Care: Periodic tumbling after cycle completion.
  4. Steam settings: Adjust steam intensity for different fabric types.

WARNING! Use distilled water only in steam reservoir. Do not overfill.

Care & Maintenance

Regular maintenance ensures optimal performance and longevity.

  1. Clean lint filter: Before every load, remove and clean lint filter.
  2. Wipe drum: Use damp cloth to clean interior after cooling.
  3. Clean exterior: Use mild detergent and soft cloth.
  4. Check venting: Inspect vent system every 6 months for blockages.
  5. Clean moisture sensors: Wipe sensor strips with rubbing alcohol monthly.

CAUTION! Unplug dryer before cleaning. Never use abrasive cleaners.

Safety Features

Multiple safety systems protect against hazards.

FeatureFunction
Child LockPrevents children from changing settings
Overheat ProtectionAutomatically shuts off if overheating detected
Door Safety SwitchStops operation when door opened
Thermal FuseProtects against electrical overload
Moisture SensorsPrevents overdrying and fabric damage

Regulatory Information

UL Listed: Complies with UL 2158 standards. Energy Star: Meets ENERGY STAR requirements for energy efficiency. FCC Part 15: Class B digital device. Copyright © 2023 LG Electronics; all rights reserved. For support, visit www.lg.com or contact 1-800-243-0000.

Troubleshooting

SymptomPossible CauseCorrective Action
Dryer won't startPower/doorCheck power connection; ensure door fully closed; reset circuit breaker.
Clothes not dryingLint/ventingClean lint filter; check venting for blockages; verify proper installation.
Unusual noisesObjects/mechanicalCheck for objects in drum; ensure dryer is level; inspect rollers.
Error codes displayedSensor/systemRefer to error code chart in manual; reset dryer; call service if persistent.
Steam not workingWater/reservoirEnsure water reservoir filled; check steam nozzle for clogs; use distilled water.

Reset: Unplug for 5 minutes to reset electronic controls.

Service: 1-800-243-0000; www.lg.com

LG Dryer TDC70045E Manual © - All Rights Reserved 2025