LG Dryer RC9041A3 Manual

The LG Dryer RC9041A3 is a high-performance electric dryer with multiple drying cycles, moisture sensor technology, stainless steel drum, wrinkle care option, child lock feature, and energy-efficient operation. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting to Power 7. Operating the Dryer 8. Safety Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Stainless steel drum, LED display, moisture sensor, lint filter, multiple drying cycles.

Feature	Description
Moisture Sensor	Automatically detects dryness level for optimal drying
Stainless Steel Drum	Durable and gentle on fabrics
LED Display	Shows cycle time and status
Lint Filter	Easy-to-clean front-loading filter
Wrinkle Care Option	Tumbles clothes periodically after cycle ends
Child Lock	Prevents accidental changes to settings
Multiple Cycles	Cotton, Permanent Press, Delicates, Quick Dry
Temperature Settings	High, Medium, Low, No Heat
Start/Pause Button	Controls dryer operation
Power Cord	Standard 3-prong dryer plug

Installation

Unpack and inspect contents. Place on level surface near power outlet.

Remove shipping materials: Remove all tape and protective coverings.
Level the dryer: Adjust leveling legs to ensure dryer is stable.
Connect venting: Attach 4-inch diameter metal vent duct to rear exhaust.
Connect power: Plug into dedicated 240V outlet.

WARNING! Dryer is heavy; use two people for installation. Ensure proper ventilation.

First-Time Setup

Connect power and prepare for first use.

Check installation: Verify dryer is level and venting is connected.
Clean lint filter: Remove and clean filter before first use.
Select language: Press and hold Options button for 3 seconds to set language.
Test run: Run empty on Air Fluff cycle to remove any dust.

CAUTION! Ensure proper electrical connection; do not use extension cord.

Specifications

Capacity: 7.4 cubic feet
Power Requirements: 240V AC, 30A
Dimensions: 27" W x 29" D x 38" H
Drum Material: Stainless Steel
Control Type: Electronic with LED display
Drying Cycles: 10 preset cycles including Sensor Dry options
Temperature Settings: 4 levels (High, Medium, Low, No Heat)
Venting: 4-inch rear exhaust
Weight: 125 lbs

Controls and Settings

Control panel includes cycle selector, temperature settings, and option buttons.

Main Controls: POWER, START/PAUSE, CYCLE SELECTOR, TEMPERATURE, OPTIONS, CHILD LOCK.

Cycle Options: Cotton, Permanent Press, Delicates, Quick Dry, Air Fluff, Heavy Duty, Bedding. Temperature Settings: High (Cotton), Medium (Permanent Press), Low (Delicates), No Heat (Air Fluff). Options: Wrinkle Care, Signal Volume, Child Lock, End of Cycle Signal.

Connecting to Power

Requires dedicated 240V, 30A electrical outlet.

Turn off power at circuit breaker before connecting.
Use proper 3-prong dryer cord (not included).
Connect ground wire to green grounding screw.
Ensure all connections are tight and secure.

Tip: Have installation performed by qualified electrician if unsure.

Operating the Dryer

Supports various fabric types and drying needs.

Load clothes: Do not overload; leave space for tumbling.
Select cycle: Choose appropriate cycle for fabric type.
Start dryer: Close door and press START.
Monitor progress: LED display shows remaining time.
Clean lint filter: Clean after every load for optimal performance.
Unload promptly: Remove clothes when cycle ends to prevent wrinkles.

WARNING! Do not dry items containing foam, rubber, or plastic.

Safety Features

Child Lock: Press and hold CHILD LOCK for 3 seconds to activate. Overheat Protection: Automatic shutoff if temperature exceeds safe limits. Door Safety Switch: Stops operation when door is opened.

Care & Cleaning

Unplug before cleaning. Clean lint filter after every load. Wipe exterior with damp cloth.

CAUTION! Do not use abrasive cleaners; keep ventilation system clear.

Regulatory Information

Troubleshooting

Symptom	Possible Cause	Corrective Action
Dryer won't start	Door/power issues	Ensure door closed properly; check power connection; reset circuit breaker.
Clothes not drying	Lint/vent issues	Clean lint filter; check venting for obstructions; verify proper heat setting.
Unusual noise	Objects in drum	Check for foreign objects; ensure load is balanced.
Error codes displayed	System faults	Refer to error code chart in manual; unplug for 5 minutes and restart.
Overheating	Vent blockage	Clean vent system; ensure adequate airflow around dryer.

Reset: Unplug for 5 minutes, then restart.

Service: 1-800-243-0000; www.lg.com