LG Dryer Model DLEC888W Owner's Manual

The LG DLEC888W is an electric dryer with advanced features including multiple drying cycles, sensor drying technology, steam refresh option, wrinkle care, and energy-efficient operation. This manual covers safety instructions, installation, operation, maintenance, and troubleshooting for optimal performance.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Utilities 7. Operating the Dryer 8. Maintenance & Cleaning 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Control panel with LCD display, lint filter, drum light, steam nozzle, temperature sensors, and moisture detection system.

Feature	Description
Sensor Dry	Automatically detects moisture levels for optimal drying
Steam Refresh	Reduces wrinkles and odors without washing
Wrinkle Care	Tumbles clothes periodically after cycle ends
Multiple Cycles	Cotton, Permanent Press, Delicates, Quick Dry
Energy Efficient	ENERGY STAR certified
Large Capacity	7.4 cubic feet drum capacity
LCD Display	Shows cycle time and status
Child Lock	Prevents accidental changes to settings
End of Cycle Signal	Audible alert when cycle completes
Door Reversal	Optional left or right door opening

Installation

Unpack and inspect contents. Place on level floor near electrical outlet and venting.

Remove shipping materials: Remove all tapes and protective covers.
Level the dryer: Adjust leveling legs to ensure dryer is stable.
Connect exhaust vent: Use 4-inch diameter metal ducting for proper ventilation.
Connect electrical: Plug into dedicated 240V outlet (NEMA 14-30R).
Test operation: Run empty cycle to verify proper installation.

WARNING! Dryer must be properly grounded. Do not use extension cord. Ensure adequate clearance for ventilation.

First-Time Setup

Before first use, complete initial setup procedures.

Clean lint filter: Remove and clean filter with warm water.
Select language: Press and hold Options button to set display language.
Set time: Use Settings menu to configure current time.
Run calibration cycle: Select Sensor Dry cycle with empty drum.
Configure preferences: Set end of cycle signal, child lock, and other options.

CAUTION! Do not operate with wet hands. Keep area around dryer clear of combustible materials.

Specifications

Model: DLEC888W
Type: Electric Dryer
Capacity: 7.4 cubic feet
Voltage: 240V AC, 60Hz
Amperage: 30A
Dimensions: 27" W x 29" D x 38.5" H
Weight: 128 lbs
Drum Material: Stainless steel
Control Type: Electronic with touch controls
Energy Rating: ENERGY STAR certified
Warranty: 1 year parts and labor, 10 years motor

Controls and Settings

Control Panel: Power button, Cycle selector, Temperature settings, Dryness level, Options, Start/Pause.

Cycles: Cotton, Permanent Press, Delicates, Quick Dry, Bedding, Towels, Sanitize, Air Fluff, Steam Refresh.

Temperature Settings: High, Medium, Low, No Heat. Dryness Level: More Dry, Normal, Less Dry. Options: Wrinkle Care, Child Lock, Signal Volume, End Time. Settings: Language, Time, Demo Mode, Factory Reset.

Connecting Utilities

Electrical: 240V dedicated circuit. Venting: 4-inch metal duct required.

Turn off power at circuit breaker before connecting.
Install proper exhaust venting to outdoors.
Ensure electrical outlet matches dryer plug configuration.
Verify proper grounding.
Check local building codes for installation requirements.

Tip: Use rigid metal ducting for best airflow and safety. Avoid plastic or foil ducts.

Operating the Dryer

Follow these steps for normal operation.

Load clothes: Do not overload; leave space for tumbling.
Select cycle: Choose appropriate cycle for fabric type.
Set options: Adjust temperature, dryness level, and additional features.
Start cycle: Press Start/Pause button.
Monitor progress: LCD displays remaining time and cycle status.
Remove promptly: Take out clothes when cycle ends to reduce wrinkles.
Clean lint filter: Clean after every cycle for optimal performance.

WARNING! Do not dry items containing foam, rubber, or plastic. Do not use dryer if lint filter is missing or damaged.

Maintenance & Cleaning

Regular maintenance ensures optimal performance and safety.

Clean lint filter after every load
Monthly: Check and clean exhaust vent system
Quarterly: Wipe drum interior with damp cloth
Annually: Professional inspection recommended
As needed: Clean control panel with soft, damp cloth

CAUTION! Unplug dryer before cleaning. Do not use abrasive cleaners or solvents.

Regulatory Information

UL listed. Complies with FCC Part 15. ENERGY STAR partner. Manufactured by LG Electronics. For support, visit www.lg.com or contact 1-800-243-0000. Serial number located on door frame. Model number DLEC888W.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Dryer won't start	Power issue/door open	Check power supply; ensure door fully closed; reset circuit breaker.
Clothes not drying	Lint buildup/vent blocked	Clean lint filter; check exhaust vent for obstructions.
Noisy operation	Foreign objects/worn parts	Check for objects in drum; inspect rollers and bearings.
Error codes displayed	Sensor issues/mechanical faults	Refer to error code chart in manual; reset dryer.
Overheating	Vent restriction/thermostat	Clean vent system; allow dryer to cool; check thermostat.

Reset: Unplug for 1 minute or press and hold Power button for 10 seconds.

Service: 1-800-243-0000; www.lg.com