LG Dryer Manual DLE3170W

The LG DLE3170W is a 7.4 cubic foot electric dryer with advanced sensor drying technology, multiple drying cycles, wrinkle care option, and energy-efficient operation. This front-loading dryer features stainless steel drum, LED display, child lock, end-of-cycle signal, and various fabric-specific settings. Below are key sections for safety, features, installation, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting to Power 7. Operating the Dryer 8. Safety Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Stainless steel drum, LED control panel, lint filter, exhaust vent, power cord connection.

Feature	Description
Capacity	7.4 cubic feet stainless steel drum
Sensor Dry	Automatically detects moisture levels
Drying Cycles	Multiple cycles for different fabric types
Wrinkle Care	Tumbles without heat periodically
LED Display	Shows cycle status and time remaining
Child Lock	Prevents accidental changes to settings
End-of-Cycle Signal	Audible alert when cycle completes
Energy Efficient	Meets ENERGY STAR requirements
Door Reversal	Optional left or right door opening
Lint Filter	Easy-clean removable filter

Installation

Unpack and inspect contents. Place on level surface near laundry area.

Remove shipping materials: Remove all tape, brackets, and protective coverings.
Level the dryer: Adjust leveling legs to ensure dryer is stable and level.
Install exhaust vent: Connect 4-inch diameter metal exhaust duct to rear vent.
Electrical connection: Connect to dedicated 240V, 30-amp electrical outlet.

WARNING! Dryer is heavy; use two people for moving. Ensure proper ventilation and electrical connection.

First-Time Setup

Connect power and perform initial setup.

Connect to power: Plug into dedicated 240V outlet.
Check exhaust system: Ensure venting is properly installed and unobstructed.
Clean lint filter: Remove and clean lint filter before first use.
Test operation: Run empty on Air Fluff cycle to verify proper operation.
Set preferences: Configure end-of-cycle signal and display settings.

CAUTION! Ensure dryer is properly grounded and vented before operation.

Specifications

Model: DLE3170W
Capacity: 7.4 cubic feet
Drum Material: Stainless steel
Power Requirements: 240V, 30A dedicated circuit
Control Type: Electronic with LED display
Drying Technology: Sensor Dry moisture detection
Cycles: Normal, Heavy Duty, Delicates, Quick Dry, Air Fluff
Dimensions: 27" W x 29" D x 38.5" H
Weight: 125 lbs
Warranty: 1 year parts and labor

Controls and Settings

Access controls via front control panel. Power Button: Turns dryer on/off. Cycle Selector: Choose drying cycles.

Control Panel: POWER, CYCLE SELECTOR, START/PAUSE, OPTIONS, CHILD LOCK, SIGNAL.

Drying Cycles: NORMAL, HEAVY DUTY, DELICATES, QUICK DRY, AIR FLUFF, TIMED DRY. Options: WRINKLE CARE, EXTRA DRY, LESS DRY, DELAY START. Settings: End-of-cycle signal volume, display brightness, child lock activation.

Connecting to Power

Electrical requirements: 240V, 30-amp dedicated circuit.

Turn off power at circuit breaker before installation.
Use proper 4-prong dryer power cord.
Connect ground wire to green ground screw.
Ensure all connections are tight and secure.
Restore power and test operation.

Tip: Have electrical connections performed by qualified electrician.

Operating the Dryer

Supports various fabric types and drying needs.

Load laundry: Place clean, damp clothes in drum. Do not overload.
Select cycle: Choose appropriate drying cycle for fabric type.
Set options: Select any additional options like Wrinkle Care.
Start dryer: Press START/PAUSE to begin cycle.
Monitor progress: LED display shows time remaining.
Remove clothes: Promptly remove clothes when cycle completes.
Clean lint filter: Clean after every load for optimal performance.

WARNING! Do not dry items containing foam, rubber, or plastic. Clean lint filter regularly.

Safety Features

Child Lock: Prevents children from changing settings. Overheat Protection: Automatically shuts off if overheating detected. Door Safety Switch: Stops operation when door is opened.

Care & Cleaning

Unplug before cleaning. Clean lint filter after every load. Wipe exterior with damp cloth.

Monthly Maintenance: Clean lint filter housing, check exhaust vent for obstructions, wipe drum interior.

CAUTION! Do not use abrasive cleaners. Keep ventilation openings clear.

Regulatory Information

UL Listed: Complies with UL safety standards. ENERGY STAR: Meets energy efficiency requirements. Copyright © 2025 LG Electronics; all rights reserved. For support, visit www.lg.com or contact 1-800-243-0000.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Dryer won't start	Power/door	Check power connection; ensure door is fully closed.
Clothes not drying	Lint/vent	Clean lint filter; check exhaust vent for obstructions.
Unusual noise	Objects in drum	Check for foreign objects; ensure load is balanced.
Error codes displayed	Various issues	Refer to error code chart in manual; reset if needed.
Overheating	Vent blockage	Clean exhaust system; ensure proper airflow.

Reset: Unplug for 5 minutes, then restart.

Service: 1-800-243-0000; www.lg.com