LG Dryer Manual DLE1501W

The LG DLE1501W is a 7.4 cubic foot electric dryer with advanced sensor drying technology, multiple drying cycles, stainless steel drum, reversible door, and energy-efficient operation. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting to Power 7. Operating the Dryer 8. Maintenance & Cleaning 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Stainless steel drum, LED display, control panel, lint filter, exhaust vent, reversible door.

Feature	Description
Sensor Dry Technology	Automatically detects moisture levels for optimal drying
7.4 cu. ft. Capacity	Large capacity for family-sized loads
Multiple Dry Cycles	Cotton, Permanent Press, Delicates, Quick Dry
LED Display	Shows cycle status and remaining time
Reversible Door	Can be configured for left or right opening
Wrinkle Care Option	Tumbles clothes periodically after cycle ends
Child Lock	Prevents accidental changes to settings
Energy Efficient	Meets ENERGY STAR® requirements
Stainless Steel Drum	Durable and gentle on fabrics
Lint Filter Indicator	Alerts when filter needs cleaning

Installation

Unpack and inspect contents. Place on level surface near proper electrical outlet.

Remove shipping materials: Remove all tapes, brackets, and protective coverings.
Level the dryer: Adjust leveling legs to ensure dryer is stable and level.
Install exhaust vent: Connect 4-inch diameter metal exhaust duct to rear vent.
Electrical connection: Connect to dedicated 240V, 30-amp electrical outlet.

WARNING! Dryer is heavy; use two people for moving. Ensure proper grounding and electrical requirements.

First-Time Setup

Complete installation and prepare for first use.

Check installation: Verify dryer is level and exhaust vent is properly connected.
Test operation: Run empty on Air Fluff cycle to remove any dust or residues.
Set preferences: Configure door swing direction if needed.
Read safety instructions: Review all safety warnings before first load.

CAUTION! Do not operate without proper exhaust ventilation. Keep area around dryer clear.

Specifications

Capacity: 7.4 cubic feet
Type: Electric Dryer
Drum Material: Stainless Steel
Control Type: Electronic with LED Display
Dry Cycles: 10+ including Sensor Dry options
Temperature Settings: High, Medium, Low, Air Fluff
Power Requirements: 240V, 30 Amp dedicated circuit
Dimensions: 27" W x 29" D x 38.5" H
Weight: 125 lbs
Warranty: 1 year parts and labor, 10 year motor warranty

Controls and Settings

Control Panel: POWER, CYCLE SELECTOR, TEMPERATURE, OPTIONS, START/PAUSE.

Dry Cycles: Cotton, Permanent Press, Delicates, Quick Dry, Heavy Duty, Sanitize, Air Fluff, Towels, Timed Dry.

Temperature Settings: High, Medium, Low, Air Fluff (no heat). Options: Wrinkle Care, Child Lock, Signal Volume, End of Cycle Signal. Sensor Dry: Automatically adjusts drying time based on moisture detection.

Connecting to Power

Electrical requirements: 240V, 60Hz, 30 Amp dedicated circuit.

Turn off power at circuit breaker before installation.
Use proper 4-wire power cord (not included).
Connect ground wire to green ground screw.
Ensure all connections are tight and secure.

Tip: Have installation performed by qualified electrician if unsure.

Operating the Dryer

Supports various fabric types and drying needs.

Load clothes: Do not overload; leave space for tumbling.
Select cycle: Choose appropriate cycle for fabric type.
Add options: Enable Wrinkle Care or other features as needed.
Start cycle: Press START/PAUSE to begin drying.
Clean lint filter: Clean before every load for optimal performance.
Unload promptly: Remove clothes when cycle completes to prevent wrinkles.

WARNING! Do not dry items containing foam, rubber, or plastic. Clean lint filter after every load.

Maintenance & Cleaning

Regular maintenance ensures optimal performance and safety.

Clean lint filter before every load
Inspect and clean exhaust vent every 6 months
Wipe drum interior with damp cloth as needed
Clean exterior with mild soap and water
Check and clean moisture sensors periodically

CAUTION! Unplug dryer before cleaning. Do not use abrasive cleaners.

Regulatory Information

Troubleshooting

Symptom	Possible Cause	Corrective Action
Dryer won't start	Power/door	Check power connection; ensure door is fully closed.
Clothes not drying	Lint/vent	Clean lint filter; check exhaust vent for blockages.
No heat	Circuit/thermostat	Check circuit breaker; verify heating element operation.
Unusual noise	Objects/drum	Check for objects in drum; inspect drum rollers.
Error codes displayed	Sensor issues	Refer to error code chart in manual; reset if needed.

Reset: Unplug for 1 minute, then reconnect if unit is unresponsive.

Service: 1-800-243-0000; www.lg.com