LG Dryer Manual DLE1101W

The LG DLE1101W is a 7.3 cubic foot electric dryer with advanced sensor drying technology, multiple drying cycles, stainless steel drum, reversible door, end-of-cycle signal, and wrinkle care option. This manual covers safety instructions, features, installation, operation, maintenance, and troubleshooting for optimal performance.

Features at a Glance

Key components: Sensor drying system, stainless steel drum, LED display, control panel, lint filter, reversible door, and multiple drying cycles.

Feature	Description
Sensor Dry	Automatically detects moisture levels for optimal drying
Stainless Steel Drum	Durable and gentle on fabrics
Multiple Cycles	10 drying cycles including Normal, Heavy Duty, Delicates
Reversible Door	Can be configured for left or right opening
Wrinkle Care	Tumbles clothes periodically after cycle ends
LED Display	Shows cycle status and remaining time
Lint Filter	Easy-to-clean front-loading filter
End-of-Cycle Signal	Audible alert when drying is complete
Child Lock	Prevents accidental changes to settings
Energy Efficient	Meets ENERGY STAR® requirements

Installation

Unpack and inspect contents. Place on level surface near proper electrical outlet.

1. Remove shipping materials: Remove all tape and protective coverings.
2. Level the dryer: Adjust leveling legs to ensure dryer is stable.
3. Connect venting: Attach 4-inch diameter metal duct to rear exhaust.
4. Electrical connection: Connect to dedicated 240V, 30-amp circuit.
5. Test operation: Run empty on Air Fluff cycle to verify proper installation.

WARNING! Dryer is heavy; use two people for moving. Ensure proper ventilation.

First-Time Setup

Complete installation and prepare for first use.

1. Install lint filter: Ensure filter is properly seated in housing.
2. Connect power: Plug into dedicated 240V outlet.
3. Select language: Set display language if applicable.
4. Run test cycle: Use Air Fluff cycle to remove any manufacturing residues.
5. Load laundry: Do not overload; follow capacity guidelines.

CAUTION! Ensure dryer is level and venting is properly installed before use.

Specifications

• Capacity: 7.3 cubic feet
• Type: Electric dryer
• Drum Material: Stainless steel
• Control Type: Electronic with LED display
• Drying Cycles: 10 cycles including Sensor Dry options
• Temperature Settings: High, Medium, Low, Air Fluff
• Power Requirements: 240V, 30-amp dedicated circuit
• Dimensions: 27" W x 29" D x 38.5" H
• Weight: 125 lbs
• Venting: 4-inch diameter metal duct required

Controls and Settings

Control panel includes cycle selector, temperature settings, and option buttons.

Cycle Selection: Normal, Heavy Duty, Permanent Press, Delicates, Quick Dry, Air Fluff, Timed Dry, Sensor Dry, Bedding, Sanitize.

Temperature Settings: High, Medium, Low, No Heat (Air Fluff). Options: Wrinkle Care, Signal Volume, Child Lock, Start/Pause.

LED Display: Shows selected cycle, remaining time, temperature setting, and status indicators.

Connecting to Power

Electrical requirements and connection procedures.

1. Power requirements: 240V, 60Hz, 30-amp dedicated circuit.
2. Outlet type: NEMA 10-30R or 14-30R as required by local codes.
3. Connection: Use 4-wire power cord (not included).
4. Grounding: Must be properly grounded according to local codes.

Tip: Have installation performed by qualified electrician if unfamiliar with electrical work.

Operating the Dryer

Daily operation procedures and cycle selection.

1. Load laundry: Do not exceed recommended capacity.
2. Select cycle: Choose appropriate cycle for fabric type.
3. Set temperature: Select heat setting based on fabric care labels.
4. Add options: Enable Wrinkle Care or adjust signal volume if desired.
5. Start cycle: Press Start/Pause button to begin drying.
6. Monitor progress: LED display shows remaining time.
7. Remove promptly: Take out clothes when cycle completes to minimize wrinkles.
8. Clean lint filter: Clean after every load for optimal performance.

WARNING! Do not dry items containing foam, rubber, or plastic. Clean lint filter after every use.

Maintenance & Cleaning

Regular maintenance ensures optimal performance and longevity.

1. Lint filter: Clean after every load; wash monthly with warm water.
2. Exhaust system: Inspect and clean venting annually.
3. Exterior: Wipe with damp cloth; do not use abrasive cleaners.
4. Drum: Wipe with soft cloth to remove any residue.
5. Moisture sensors: Clean with rubbing alcohol if drying performance decreases.

CAUTION! Unplug dryer before cleaning. Never use harsh chemicals on surfaces.

Safety Features

Built-in safety mechanisms for protection.

Feature	Function
Thermal Cut-off	Prevents overheating
Child Lock	Disables control panel during operation
Door Switch	Stops operation when door is opened
Motor Protection	Prevents motor damage from overload
Vent Blockage Alert	Warns if exhaust system is restricted

Regulatory Information

UL listed; meets FCC Part 15 requirements. ENERGY STAR® qualified. Manufactured by LG Electronics. For support, visit www.lg.com or contact 1-800-243-0000. Serial number located on door frame. Model DLE1101W.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Dryer won't start	Power/door	Check power connection; ensure door is fully closed.
Clothes not drying	Lint/venting	Clean lint filter; check venting for restrictions.
No heat	Circuit/thermostat	Check circuit breaker; verify heating element.
Excessive noise	Objects/installation	Check for objects in drum; ensure level installation.
Error codes	Various issues	Refer to error code chart in manual; reset if needed.

Reset: Unplug for 1 minute to reset electronic controls.

Service: 1-800-243-0000; www.lg.com