LG Dryer DLGX2651W Manual

The LG DLGX2651W is a 7.4 cubic foot electric dryer with advanced features including SteamFresh™ technology, Sensor Dry system, LoDecibel™ quiet operation, multiple drying cycles, LED display, and energy-efficient performance. This manual covers safety guidelines, installation, operation, maintenance, and troubleshooting for optimal use.

Features at a Glance

Key components: Large capacity drum, LED control panel, SteamFresh function, multiple sensors, lint filter, and energy-saving features.

Installation

Unpack and inspect all components. Ensure proper location and ventilation.

1. Choose location: Level floor, near electrical outlet, adequate ventilation.
2. Remove shipping materials: Remove all tapes and protective coverings.
3. Level the dryer: Adjust leveling legs for stability.
4. Connect venting: Use 4-inch diameter metal duct for proper exhaust.
5. Electrical connection: Connect to dedicated 240V outlet.

WARNING! Dryer is heavy; use two people for moving. Ensure proper grounding.

First-Time Setup

Complete installation before first use.

1. Check installation: Verify leveling and vent connection.
2. Clean lint filter: Remove and clean before first load.
3. Select language: Set display language if applicable.
4. Test run: Run empty on Air Fluff cycle to remove dust.
5. Load laundry: Do not overload; follow capacity guidelines.

CAUTION! Ensure proper ventilation to prevent overheating.

Specifications

• Model: DLGX2651W
• Type: Electric Dryer
• Capacity: 7.4 cubic feet
• Width: 27 inches
• Height: 38.5 inches
• Depth: 32 inches
• Power Requirements: 240V, 30A
• Control Type: Electronic with LED display
• Drying Technology: Sensor Dry with Steam
• Noise Level: LoDecibel™ quiet operation
• Warranty: 1 year parts and labor

Controls and Settings

Control panel includes cycle selection, temperature settings, and special functions.

Main Controls: POWER, CYCLE SELECTION, TEMPERATURE, TIME DRY, SENSOR DRY, STEAM, START/PAUSE.

Cycles: Normal, Heavy Duty, Permanent Press, Delicates, Quick Dry, Air Fluff, Sanitize, Steam Refresh. Temperature Settings: High, Medium, Low, No Heat. Options: Wrinkle Care, End of Cycle Signal, Child Lock.

Connecting to Power

Electrical requirements and connection procedures.

1. Power requirements: 240V, 30A dedicated circuit.
2. Outlet type: NEMA 10-30R or 14-30R.
3. Professional installation: Recommended for electrical connections.
4. Grounding: Must be properly grounded.

Tip: Have installation performed by qualified technician.

Operating Modes

Various drying cycles for different fabric types.

1. Sensor Dry: Automatically adjusts drying time based on moisture.
2. Time Dry: Manual time setting from 10-180 minutes.
3. Normal Cycle: Standard drying for cotton and mixed loads.
4. Heavy Duty: Extended drying for heavy fabrics.
5. Permanent Press: Reduced heat for synthetic fabrics.
6. Delicates: Low heat for delicate items.
7. Quick Dry: 30-minute cycle for lightly worn items.
8. Air Fluff: No heat for fluffing pillows or refreshing clothes.

WARNING! Do not dry items containing foam, rubber, or plastic.

Steam Functions

SteamFresh technology for wrinkle reduction and odor removal.

1. Steam Refresh: 20-minute cycle to reduce wrinkles.
2. Sanitize: High-temperature steam to eliminate bacteria.
3. Static Reduction: Steam helps reduce static cling.
4. Odor Removal: Freshens clothes without washing.

Care & Maintenance

Regular maintenance ensures optimal performance and longevity.

1. Clean lint filter after every load.
2. Monthly: Check and clean venting system.
3. Quarterly: Wipe drum interior with damp cloth.
4. Annually: Professional inspection recommended.

CAUTION! Unplug before cleaning. Never use harsh chemicals.

Regulatory Information

UL listed; complies with FCC Part 15. Energy Star certified. Manufactured by LG Electronics. For support, visit www.lg.com or contact 1-800-243-0000. Serial number located on door frame.

Troubleshooting

Reset: Unplug for 1 minute to reset electronic controls.

Service: 1-800-243-0000; www.lg.com