LG Dryer DLEX5170W Manual

The LG DLEX5170W is a 7.4 cubic foot electric dryer with advanced features including Sensor Dry technology, multiple drying cycles, steam refresh option, reversible door, and energy-efficient operation. Below are key sections for safety, features, installation, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting to Power 7. Operating the Dryer 8. Maintenance & Cleaning 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: Large capacity drum, LED display, control panel, lint filter, exhaust vent, reversible door.

Feature	Description
Sensor Dry Technology	Automatically detects moisture levels for optimal drying
Steam Refresh	Reduces wrinkles and odors without washing
Multiple Cycles	Cotton, Permanent Press, Delicates, Quick Dry, etc.
Reversible Door	Can be hinged left or right for installation flexibility
LED Display	Shows cycle status, time remaining, and settings
Lint Filter	Easy-clean filter for optimal airflow
Energy Efficient	ENERGY STAR certified for reduced energy consumption
Child Lock	Prevents accidental changes to settings
End of Cycle Signal	Audible alert when drying is complete
Wrinkle Care	Tumbles periodically after cycle to reduce wrinkles

Installation

Unpack and inspect contents. Place on level surface near electrical outlet.

Remove shipping materials: Remove all tape and protective coverings.
Level the dryer: Adjust leveling legs to ensure dryer is stable.
Connect exhaust vent: Use 4-inch diameter metal duct for proper ventilation.
Connect to power: Use dedicated 240V outlet with proper grounding.
Test operation: Run a test cycle to verify proper installation.

WARNING! Dryer is heavy; use two people for moving. Ensure proper ventilation to prevent fire hazard.

First-Time Setup

Before first use, complete initial setup procedures.

Clean lint filter: Remove and clean filter before first load.
Select language: Set display language if applicable.
Test cycles: Run empty cycle to familiarize with controls.
Adjust settings: Set time, signal volume, and other preferences.
Load laundry: Sort fabrics and load according to capacity guidelines.

CAUTION! Do not overload dryer. Follow fabric care labels for best results.

Specifications

Capacity: 7.4 cubic feet
Type: Electric Dryer
Dimensions: 27" W x 38.5" H x 32" D
Power Requirements: 240V, 60Hz
Drum Material: Stainless Steel
Control Type: Electronic with LED Display
Drying Cycles: 12+ including Sensor Dry options
Special Features: Steam Refresh, Wrinkle Care, Child Lock
Warranty: 1 year parts and labor, 10 year motor warranty
Energy Rating: ENERGY STAR certified

Controls and Settings

Control panel includes cycle selection, temperature settings, and special features.

Main Controls: POWER, CYCLE SELECTOR, TEMPERATURE, START/PAUSE, OPTIONS

Cycle Options: Normal, Heavy Duty, Delicates, Quick Dry, Air Fluff, Steam Refresh, Wrinkle Care. Temperature Settings: High, Medium, Low, No Heat. Options: Signal Volume, Child Lock, End of Cycle Signal, Energy Saver mode.

Connecting to Power

Electrical requirements: 240V dedicated circuit with proper grounding.

Turn off power at circuit breaker before installation.
Use 4-wire power cord (not included) with proper ratings.
Connect ground wire to dryer frame and electrical panel.
Ensure all connections are tight and secure.
Restore power and test operation.

Tip: Have installation performed by qualified electrician if unsure.

Operating the Dryer

Follow these steps for proper dryer operation.

Load laundry: Do not exceed recommended capacity.
Select cycle: Choose appropriate cycle for fabric type.
Set temperature: Select heat setting based on fabric care labels.
Add options: Select steam, wrinkle care, or other features as needed.
Start cycle: Press START/PAUSE to begin drying.
Clean lint filter: Clean before every load for optimal performance.
Remove promptly: Remove laundry when cycle completes to prevent wrinkles.

WARNING! Clean lint filter before every load to prevent fire hazard.

Maintenance & Cleaning

Regular maintenance ensures optimal performance and longevity.

Clean lint filter after every load
Wipe control panel with damp cloth
Clean drum with mild detergent as needed
Inspect exhaust vent quarterly for lint buildup
Check power cord and connections periodically

CAUTION! Unplug dryer before cleaning. Do not use harsh chemicals or abrasives.

Safety Information

Important safety precautions for dryer operation.

Do not dry items that have been in contact with flammable substances
Clean lint filter before every load
Ensure proper ventilation and clear exhaust system
Do not operate with damaged power cord or plug
Keep area around dryer clear of combustible materials
Supervise children around operating appliance

Troubleshooting

Symptom	Possible Cause	Corrective Action
Dryer won't start	Power issue/door open	Check power supply; ensure door is fully closed; reset circuit breaker.
Clothes not drying	Lint buildup/vent blocked	Clean lint filter; check exhaust vent for obstructions.
Unusual noise	Foreign objects/worn parts	Check for objects in drum; inspect rollers and bearings.
Error codes displayed	Sensor/system issues	Refer to error code chart in manual; reset dryer.
Overheating	Vent blockage/thermostat	Clean exhaust system; check thermostat operation.

Reset: Unplug for 5 minutes to reset electronic controls.

Service: 1-800-243-0000; www.lg.com