LG Dryer DLE2301R Manual

The LG Dryer DLE2301R is a high-efficiency electric dryer featuring multiple drying cycles, temperature settings, sensor drying technology, wrinkle care option, child lock, and energy-saving modes. With a 7.3 cu. ft. capacity, this dryer offers advanced moisture sensing, stainless steel drum, reversible door, and multiple fabric care options. Below are key sections for safety, features, installation, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Drying Cycles 7. Maintenance & Cleaning 8. Safety Features 9. Energy Efficiency 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Stainless steel drum, LED display, control panel, lint filter, exhaust vent, reversible door, moisture sensor.

Feature	Description
Capacity	7.3 cubic feet stainless steel drum
Sensor Dry	Automatically detects moisture levels
Drying Cycles	10 cycles including Normal, Heavy Duty, Delicates
Temperature Settings	High, Medium, Low, No Heat
Wrinkle Care	Tumble without heat for 30-150 minutes
Child Lock	Prevents accidental changes to settings
Reversible Door	Can be opened from left or right
LED Display	Shows cycle time and settings
Lint Filter	Easy-clean removable filter
Energy Star	Certified for energy efficiency

Installation

Unpack and inspect contents. Place on level surface near electrical outlet.

Remove shipping materials: Remove all tape and protective covers.
Level the dryer: Adjust leveling legs to ensure dryer is stable.
Connect exhaust vent: Use 4-inch diameter metal duct for proper ventilation.
Connect to power: Plug into dedicated 240V outlet.
Test operation: Run empty cycle to verify proper installation.

WARNING! Dryer must be properly grounded. Ensure adequate clearance for ventilation.

First-Time Setup

Before first use, complete initial setup procedures.

Clean lint filter: Remove and clean filter before first load.
Select language: Set display language if applicable.
Test cycles: Run quick dry cycle to familiarize with controls.
Set preferences: Configure default settings and options.

CAUTION! Do not operate without proper exhaust ventilation.

Specifications

Capacity: 7.3 cu. ft.
Power Requirements: 240V, 30A
Dimensions: 27" W x 29" D x 38.5" H
Drum Material: Stainless steel
Control Type: Electronic with LED display
Drying Cycles: 10 preset cycles
Temperature Settings: 4 levels
Moisture Sensor: Yes
Wrinkle Care: Yes
Child Lock: Yes

Controls and Settings

Control panel includes cycle selector, temperature settings, start/pause, and option buttons.

Main Controls: POWER, CYCLE SELECTOR, TEMPERATURE, START/PAUSE, OPTIONS, CHILD LOCK.

Cycle Options: Normal, Heavy Duty, Delicates, Permanent Press, Quick Dry, Air Fluff, Sanitize, Bedding, Towels, Timed Dry. Temperature Settings: High, Medium, Low, No Heat. Additional Features: Wrinkle Care, Signal Volume, Display Brightness, Energy Saving Mode.

Drying Cycles

Select appropriate cycle for fabric type and drying needs.

Normal: Regular fabrics, mixed loads
Heavy Duty: Jeans, towels, heavy fabrics
Delicates: Gentle drying for delicate items
Permanent Press: Reduces wrinkles
Quick Dry: Small loads, 30-minute cycle
Air Fluff: No heat for fluffing pillows
Sanitize: High heat for sanitization
Bedding: Optimized for bedding items
Towels: High heat for absorbent towels
Timed Dry: Manual time setting

Tip: Use sensor dry cycles for optimal drying and energy efficiency.

Maintenance & Cleaning

Regular maintenance ensures optimal performance and longevity.

Clean lint filter after every load
Monthly: Check and clean exhaust vent
Quarterly: Wipe drum interior with damp cloth
Annually: Professional inspection recommended

CAUTION! Unplug dryer before cleaning. Never use harsh chemicals.

Safety Features

Child Lock: Prevents accidental changes. Overheat Protection: Automatic shutoff. Door Safety: Stops when door opened. Cool Down Cycle: Reduces temperature at end of cycle.

Energy Efficiency

Energy Star certified. Moisture sensor prevents over-drying. Energy saving mode reduces standby power.

Regulatory Information

Troubleshooting

Symptom	Possible Cause	Corrective Action
Dryer won't start	Power/door	Check power connection; ensure door is closed properly.
Clothes not drying	Lint/vent	Clean lint filter; check exhaust vent for blockage.
Noisy operation	Objects/balance	Check for objects in drum; ensure load is balanced.
Error codes displayed	Sensor issues	Refer to error code chart in manual; reset if needed.
Overheating	Ventilation	Ensure proper ventilation; clean exhaust system.

Reset: Unplug for 1 minute then restart.

Service: 1-800-243-0000; www.lg.com