LG Dryer DLE0442W Manual

The LG Dryer DLE0442W is a 7.3 cubic foot electric dryer with advanced moisture sensor technology, multiple drying cycles, wrinkle care option, and energy-efficient operation. Features include stainless steel drum, reversible door, end-of-cycle signal, and child lock. Below are key sections for safety, features, installation, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Control panel with LED display, stainless steel drum, lint filter, reversible door, moisture sensors, and multiple drying options.

Installation

Unpack and inspect contents. Place on level surface near electrical outlet.

1. Remove shipping materials: Remove all tape and protective coverings.
2. Level the dryer: Adjust leveling legs to ensure unit is stable.
3. Connect venting: Attach 4-inch diameter metal duct to rear exhaust.
4. Electrical connection: Connect to dedicated 240V outlet.
5. Test operation: Run empty cycle to verify proper installation.

WARNING! Dryer is heavy; use two people for installation. Ensure proper ventilation.

First-Time Setup

Complete installation and prepare for first use.

1. Install lint filter: Place filter in its housing completely.
2. Connect power: Plug into dedicated 240V outlet.
3. Select language: Press and hold Options button for 3 seconds.
4. Set preferences: Configure end-of-cycle signal volume.
5. Run test cycle: Use Normal cycle with empty drum.

CAUTION! Ensure dryer is level and venting is properly installed before use.

Specifications

• Model: DLE0442W
• Capacity: 7.3 cubic feet
• Power Requirements: 240V, 30A dedicated circuit
• Dimensions: 27" W x 29" D x 38.5" H
• Drum Material: Stainless steel
• Venting: 4-inch diameter rear exhaust
• Control Type: Electronic with LED display
• Weight: 125 lbs
• Warranty: 1 year parts and labor

Controls and Settings

Control Panel: POWER, CYCLE SELECTION, TEMPERATURE, OPTIONS, START/PAUSE.

Cycles: Normal, Delicates, Heavy Duty, Timed Dry, Air Fluff, Sanitize.

Temperature Settings: High, Medium, Low, No Heat. Options: Wrinkle Care, Child Lock, Signal Volume, End-of-Cycle Tone. Display: Shows cycle time remaining, selected options, and error codes.

Connecting to Power

Requires dedicated 240V, 30A electrical circuit.

1. Turn off power at circuit breaker before installation.
2. Use 4-wire power cord (not included).
3. Connect ground wire to green grounding screw.
4. Ensure all connections are tight and secure.
5. Restore power and test operation.

Tip: Have installation performed by qualified electrician if unsure.

Operating the Dryer

Follow these steps for proper drying operation.

1. Load laundry: Do not overload; leave space for tumbling.
2. Select cycle: Choose appropriate cycle for fabric type.
3. Set temperature: Select heat setting based on fabric care labels.
4. Add options: Enable Wrinkle Care if desired.
5. Start cycle: Press START/PAUSE to begin drying.
6. Monitor progress: Check display for time remaining.
7. Remove promptly: Take out laundry when cycle completes.

WARNING! Do not dry items that have been in contact with flammable substances.

Maintenance & Cleaning

Regular maintenance ensures optimal performance and safety.

1. Clean lint filter after every load.
2. Monthly: Check and clean venting system.
3. Quarterly: Wipe drum interior with damp cloth.
4. Annually: Have professional inspect electrical connections.

CAUTION! Unplug dryer before cleaning interior components.

Safety Features

Child Lock: Prevents accidental setting changes. Thermal Overload Protection: Automatically shuts off if overheating detected. Door Safety Switch: Stops operation when door is opened.

Regulatory Information

UL Listed; meets FCC Part 15 Class B digital device requirements. ENERGY STAR certified. Copyright © 2025 LG Electronics; all rights reserved. For support, visit www.lg.com or contact 1-800-243-0000.

Troubleshooting

Reset: Unplug for 5 minutes, then restart.

Service: 1-800-243-0000; www.lg.com