LG DLGX2656V Service Manual

The LG DLGX2656V is a high-performance dryer unit featuring advanced drying technology, multiple drying cycles, energy-efficient operation, smart diagnostics, and user-friendly controls. This service manual provides comprehensive information for installation, operation, maintenance, and troubleshooting of the DLGX2656V model. Below are key sections covering safety procedures, technical specifications, installation guidelines, operational features, and service troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Utilities 7. Operating Procedures 8. Maintenance Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Advanced drying system, Control Panel, Lint Filter, Exhaust Vent, Power Connector, Diagnostic Port, Moisture Sensor.

Feature	Description
Control Panel	Digital display with touch controls for cycle selection
Lint Filter	Removable filter for easy cleaning and maintenance
Exhaust Vent	4-inch diameter vent for proper air circulation
Power Connector	240V AC power input connection
Diagnostic Port	Service port for technical diagnostics
Moisture Sensor	Automatically detects dryness level for optimal drying
START/PAUSE	Initiates or pauses drying cycle
CYCLE SELECT	Chooses between different drying programs
TEMPERATURE	Adjusts drying temperature settings
POWER	Turns dryer on/off

Installation

Unpack and inspect contents. Ensure proper location with adequate ventilation.

Position unit: Place on level surface with minimum 4-inch clearance around sides and back.
Connect exhaust vent: Attach 4-inch diameter vent hose to rear exhaust port.
Electrical connection: Connect to dedicated 240V AC outlet with proper grounding.
Gas connection (if applicable): For gas models, connect to gas supply line with approved fittings.

WARNING! Unit is heavy; use proper lifting techniques. Ensure all connections are secure before operation.

First-Time Setup

Power on dryer; follow initial setup procedure.

Language selection: Press SETTINGS button, select preferred language (default: ENGLISH).
Cycle programming: Use CYCLE SELECT to choose default drying programs.
Temperature settings: Adjust default temperature for different fabric types.
Test operation: Run empty cycle to verify proper installation and operation.

CAUTION! Ensure proper ventilation and level installation before first use.

Specifications

Capacity: 7.4 cubic feet drying capacity.
Power Requirements: 240V AC, 30A circuit.
Drying System: Sensor Dry technology with multiple heat settings.
Control System: Electronic controls with LED display.
Cycles: Normal, Delicates, Heavy Duty, Quick Dry, Air Fluff.
Dimensions: 27" W x 29" D x 43" H.
Weight: 125 lbs.
Vent Requirements: 4-inch diameter rigid or flexible metal vent.

Controls and Settings

Access control panel via front interface. Main Controls: POWER, START/PAUSE, CYCLE SELECT, TEMPERATURE, TIMER.

Display: Cycle status, time remaining, temperature setting, error codes.

Cycle Settings: NORMAL (standard drying), DELICATES (low heat), HEAVY DUTY (high heat), QUICK DRY (reduced time), AIR FLUFF (no heat). Temperature: HIGH, MEDIUM, LOW, NO HEAT. Timer: 10-180 minutes adjustable. Settings: Language, buzzer volume, default cycles.

Connecting Utilities

Electrical: 240V AC dedicated circuit. Vent: 4-inch exhaust vent. Gas (if applicable): 1/2-inch gas line.

Turn off power at circuit breaker before electrical connection.
Ensure vent hose is properly secured without kinks or restrictions.
For gas models, check for leaks with soap solution after connection.
Verify proper grounding of electrical connection.

Tip: Use metal vent hose for maximum safety and efficiency.

Operating Procedures

Supports various fabric types and drying needs.

Load laundry: Place clothes in drum, do not overload.
Select cycle: Choose appropriate cycle for fabric type.
Set temperature: Adjust heat setting as needed.
Start cycle: Press START button to begin drying.
Monitor progress: Check display for time remaining and cycle status.
Clean lint filter: Remove and clean lint filter after each use.
Unload: Remove clothes promptly when cycle completes.

WARNING! Do not overload dryer. Clean lint filter after every use to prevent fire hazard.

Maintenance Features

Self-diagnostics: Error code display for troubleshooting. Maintenance reminders: Filter cleaning alerts, vent blockage detection. Service mode: Technical diagnostics accessible through control panel sequence.

Care & Cleaning

Unplug before cleaning. Clean lint filter after every use. Wipe exterior with damp cloth. Clean vent system annually.

CAUTION! Do not use abrasive cleaners. Ensure unit is unplugged during cleaning.

Regulatory Information

UL Certified: Meets UL 2158 standards for electric dryers. Energy Star: Compliant with energy efficiency requirements. Copyright © 2025 LG Electronics; trademarks of LG Corp. For technical support, visit www.lg.com or contact 1-800-243-0000.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Dryer won't start	Power/door switch	Check power connection; ensure door is fully closed; verify circuit breaker.
No heat	Heater element/thermostat	Check heating element; test thermal fuse; verify thermostat operation.
Long drying times	Vent restriction/loading	Clean vent system; check for proper airflow; reduce load size.
Unusual noise	Rollers/belt	Inspect rollers and idler pulley; check drive belt for wear.
Error codes displayed	Sensor/systems	Refer to error code chart in service manual; reset unit if applicable.

Reset: Unplug for 5 minutes to reset control board.

Service: 1-800-243-0000; www.lg.com