LG DLG0452W Manual

The LG DLG0452W is a high-performance dryer with advanced features including multiple drying cycles, moisture sensor technology, steam refresh option, and energy-efficient operation. Below are key sections covering safety, features, installation, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Control panel with LCD display, moisture sensors, lint filter, drum light, steam function, and multiple drying programs.

Feature	Description
Moisture Sensor	Automatically detects dryness level for optimal drying
Steam Refresh	Reduces wrinkles and refreshes clothes
Multiple Cycles	Cotton, Synthetic, Delicate, Quick Dry, and more
Energy Efficient	ENERGY STAR certified for reduced power consumption
LCD Display	Shows cycle time, settings, and status information
Child Lock	Prevents accidental changes to settings
Delay Start	Set drying cycle to begin at later time
End of Cycle Signal	Audible alert when drying completes
Reversible Door	Can be configured for left or right opening
Wrinkle Care	Tumbles clothes periodically after cycle ends

Installation

Unpack and inspect contents. Place on level surface near power outlet and venting.

1. Remove shipping materials: Remove all tape and protective coverings.
2. Level the dryer: Adjust leveling legs to ensure unit is stable.
3. Connect venting: Attach 4-inch diameter metal duct to rear exhaust.
4. Connect power: Plug into dedicated 240V outlet.
5. Test operation: Run empty cycle to verify proper installation.

WARNING! Dryer is heavy; use two people for moving. Ensure proper ventilation to prevent fire hazard.

First-Time Setup

After installation, configure initial settings for optimal performance.

1. Language selection: Press and hold Settings button for 3 seconds to choose language.
2. Set time: Configure current time using digital display.
3. Test moisture sensor: Run calibration cycle if available.
4. Familiarize with controls: Review all buttons and display functions.
5. Load first laundry: Start with small load to test operation.

CAUTION! Ensure dryer is properly leveled and venting is secure before first use.

Specifications

• Capacity: 7.4 cubic feet
• Power Requirements: 240V, 30A
• Dimensions: 27" W x 29" D x 38" H
• Weight: 130 lbs
• Drying Technology: Sensor Dry with moisture detection
• Cycles: 12 preset drying programs
• Temperature Settings: High, Medium, Low, Air Fluff
• Energy Rating: ENERGY STAR certified
• Warranty: 1 year parts and labor
• Color: White

Controls and Settings

Control panel includes Power button, Cycle selector, Temperature settings, Time dry options, and Special function buttons.

Main Controls: POWER, START/PAUSE, CYCLE SELECTOR, TEMPERATURE, TIME DRY, OPTIONS, DELAY START.

Cycle Options: Cotton, Permanent Press, Delicates, Quick Dry, Heavy Duty, Air Fluff, Steam Refresh, Sanitize, Bedding, Towels, Timed Dry. Temperature Settings: High, Medium, Low, No Heat. Options: Wrinkle Care, End of Cycle Signal, Child Lock, Moisture Level selection.

Connecting Utilities

Electrical: 240V dedicated circuit. Venting: 4-inch metal duct required.

1. Turn off power at circuit breaker before connecting.
2. Install proper electrical outlet matching dryer plug configuration.
3. Route venting with minimal bends and maximum 25 feet length.
4. Ensure vent termination is clear of obstructions outdoors.
5. Verify gas connection (if gas model) by licensed professional.

Tip: Use rigid metal ducting for best performance and safety.

Operating Modes

Supports multiple drying programs for different fabric types.

1. Select cycle: Turn cycle selector to desired program.
2. Set options: Choose temperature, dryness level, and special features.
3. Load laundry: Place clothes evenly in drum, close door securely.
4. Start cycle: Press START/PAUSE button to begin drying.
5. Monitor progress: LCD displays remaining time and cycle status.
6. Remove promptly: Take out clothes when cycle completes to reduce wrinkles.
7. Clean lint filter: Remove and clean filter after every load.

WARNING! Do not overload dryer. Clean lint filter after every use to prevent fire hazard.

Maintenance & Cleaning

Regular maintenance ensures optimal performance and longevity.

1. Clean lint filter after every load.
2. Monthly: Check and clean venting system.
3. Quarterly: Wipe interior drum and door seal.
4. Annually: Professional inspection recommended.
5. As needed: Clean control panel with damp cloth.

CAUTION! Unplug dryer before cleaning. Never use abrasive cleaners.

Safety Features

Overheat protection, door safety switch, child lock, thermal fuse, moisture sensors for fire prevention.

Regulatory Information

UL certified; complies with FCC Part 15 for electromagnetic interference. ENERGY STAR partner. Copyright © 2025 LG Electronics; all rights reserved. For support, visit www.lg.com or contact 1-800-243-0000.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Dryer won't start	Door not closed/power issue	Ensure door fully closed; check power outlet and circuit breaker.
Clothes not drying	Lint buildup/venting	Clean lint filter; check venting for obstructions.
Unusual noise	Foreign objects/worn parts	Check for objects in drum; inspect rollers and belts.
Error codes displayed	Sensor issues/mechanical faults	Refer to error code chart in manual; reset unit.
Overheating	Venting blocked/overload	Clean vent system; reduce load size.

Reset: Unplug for 5 minutes then restart.

Service: 1-800-243-0000; www.lg.com