LG DLEX8000V Service Manual

The LG DLEX8000V is a high-capacity electric dryer featuring TurboSteam technology, Sensor Dry system, Wi-Fi connectivity, LoDecibel quiet operation, stainless steel drum, multiple drying cycles, and energy-efficient performance. This service manual provides comprehensive technical information for authorized service technicians, including disassembly procedures, troubleshooting guides, parts lists, and maintenance instructions.

1. Product Overview 2. Technical Specifications 3. Safety Precautions 4. Disassembly Procedures 5. Component Locations 6. Electrical System 7. Control System 8. Heating System 9. Troubleshooting Guide 10. Parts List 11. Wiring Diagrams

Product Overview

The LG DLEX8000V electric dryer features advanced drying technology with smart connectivity and energy-efficient operation.

Feature	Description
Capacity	7.4 cubic feet stainless steel drum
TurboSteam	Reduces wrinkles and refreshes clothes
Sensor Dry	Automatically detects moisture levels
Wi-Fi Connect	Remote monitoring and control via ThinQ app
LoDecibel	Quiet operation technology
Drying Cycles	12 drying cycles including sanitize cycle
Control Panel	LED display with touch controls
Power Requirements	240V, 30A dedicated circuit
Dimensions	27" W x 31.5" D x 38.75" H
Weight	128 lbs

Technical Specifications

Model: DLEX8000V
Type: Electric Dryer
Capacity: 7.4 cu. ft.
Voltage: 240V AC
Current: 30A
Heating Element: 5600W
Motor: 1/3 HP, reversible
Control System: Electronic with microprocessor
Display: LED with touch controls
Connectivity: Wi-Fi 2.4GHz
Noise Level: 65 dB maximum

Safety Precautions

Before servicing, always disconnect power and follow safety procedures.

Disconnect power: Unplug dryer or turn off circuit breaker before servicing.
Grounding: Ensure proper grounding of all components.
High voltage: Exercise caution when working with heating elements and control boards.
Sharp edges: Wear protective gloves when handling internal components.
Test procedures: Follow all testing protocols to ensure safe operation.

WARNING! Failure to follow safety procedures may result in electric shock, fire, or personal injury. Only qualified technicians should perform service.

Disassembly Procedures

Step-by-step disassembly instructions for major components.

Top panel removal: Remove two rear screws and lift top panel forward.
Console removal: Remove screws from console and disconnect wiring harnesses.
Front panel removal: Remove screws from front panel and disconnect door switch.
Drum removal: Remove front panel, lift front of drum, and slide forward.
Heating element access: Remove rear panel for heating element replacement.
Motor removal: Remove belt, disconnect wiring, and remove mounting bolts.

CAUTION! Label all wiring connections and keep screws organized for reassembly.

Component Locations

Identification and location of major components within the dryer.

Component	Location
Main Control Board	Behind console panel
User Interface Board	Front console
Motor	Bottom rear of cabinet
Heating Element	Rear of drum housing
Thermal Fuse	On blower housing
Temperature Sensors	Inside drum housing
Door Switch	Front panel behind door
Belt Switch	Motor mounting bracket
Wi-Fi Module	Behind control panel

Electrical System

Detailed electrical system components and testing procedures.

Power supply: Test incoming voltage at terminal block.
Heating circuit: Verify continuity of heating element and thermostats.
Motor circuit: Test motor windings and start capacitor.
Control voltage: Check 12V and 5V DC supplies on control board.
Sensor circuits: Test moisture sensors and temperature sensors.

Tip: Use manufacturer-specified test equipment and follow wiring diagrams precisely.

Control System

Microprocessor-based control system with sensor inputs and output controls.

Main Control Board: Processes all sensor inputs and controls motor, heating element, and user interface.

User Interface: Touch controls with LED display, cycle selection, and settings adjustment.

Sensors: Moisture sensors, temperature sensors, motor RPM sensor, door switch.

Communication: Wi-Fi module for remote connectivity and software updates.

Diagnostic Mode: Access by pressing specific button combinations for error code display.

Heating System

Electric heating system with safety controls and temperature regulation.

Heating element: 5600W coiled element with ceramic insulators.
Thermal cut-off: High-limit thermostat for over-temperature protection.
Operating thermostat: Controls drum temperature during cycles.
Temperature sensors: Monitor air temperature for precise control.
Heater relay: Controlled by main board to energize heating element.

WARNING! Always test thermal fuses and cut-offs when replacing heating elements.

Troubleshooting Guide

Symptom	Possible Cause	Corrective Action
No power	Power supply, door switch, thermal fuse	Check power cord, circuit breaker, door switch, thermal fuse
No heat	Heating element, thermostats, control board	Test heating element continuity, check thermal fuses, verify control board output
Motor not running	Motor, belt, start capacitor, control board	Test motor windings, check belt condition, verify start capacitor, test control signals
Error codes displayed	Sensor failures, communication errors	Refer to error code chart, test sensors, check wiring connections
Poor drying performance	Heating element, airflow, moisture sensors	Check heating element, clean lint filter and venting, test moisture sensors
Excessive noise	Rollers, blower wheel, motor bearings	Inspect rollers and idler pulley, check blower wheel, test motor bearings

Parts List

Common replacement parts for LG DLEX8000V dryer.

Part Number	Description
6325ER2002A	Heating Element Assembly
6326ER1003B	Motor Assembly
6871EL2001E	Main Control Board
6871EL1003A	User Interface Board
3492ER2001A	Thermal Fuse
4681EL2001M	Drum Roller Kit
4681EY1003A	Drive Belt
6870EL1001A	Door Switch
MCL45626702	Wi-Fi Module

Wiring Diagrams

Complete electrical schematics for troubleshooting and repair.

Main power distribution: Terminal block to components
Control circuit: Microprocessor and sensor wiring
Motor circuit: Drive motor and start components
Heating circuit: Heating element and safety controls
User interface: Display and control wiring
Communication: Wi-Fi module connections

Service Contact: LG Authorized Service Center 1-800-243-0000

Technical Support: www.lg.com/us/support