LG DLEC888W Owner's Manual Dryer

The LG DLEC888W is an electric dryer with advanced features including SteamFresh™ technology, TurboSteam™ for wrinkle removal, Sensor Dry system for optimal drying, multiple drying cycles, energy-saving options, large capacity drum, LED display, and smart connectivity. Below are key sections for safety, features, installation, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting to Power 7. Using Drying Cycles 8. Steam Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Large capacity drum, SteamFresh™ technology, Sensor Dry system, LED display, multiple drying cycles, energy monitoring.

Feature	Description
SteamFresh™	Refreshes clothes and reduces wrinkles
TurboSteam™	Quick wrinkle removal cycle
Sensor Dry	Automatically detects moisture levels
LED Display	Shows cycle status and time remaining
Multiple Cycles	Cotton, Permanent Press, Delicates, Quick Dry
Energy Monitoring	Tracks energy usage for efficiency
Smart Connectivity	Wi-Fi enabled for remote control
Lint Filter	Easy-clean front-loading filter
Child Lock	Safety feature to prevent accidental use
Delay Start	Set drying cycle to start later

Installation

Unpack and inspect contents. Place on level surface near power outlet.

Remove shipping materials: Remove all tapes and protective covers.
Level the dryer: Adjust leveling legs to ensure dryer is stable.
Connect venting: Attach exhaust vent to rear port, ensure proper airflow.
Connect to power: Use dedicated 240V outlet with proper grounding.

WARNING! Dryer is heavy; use two people for installation. Ensure proper ventilation.

First-Time Setup

Connect power and follow initial setup procedure.

Power on dryer: Plug into dedicated 240V outlet.
Initial settings: Set language and time on control panel.
Test cycle: Run empty cycle to ensure proper operation.
Connect to Wi-Fi: Download LG ThinQ app for smart features.

CAUTION! Ensure proper electrical connection and ventilation before first use.

Specifications

Capacity: 7.4 cubic feet
Power Source: 240V AC, 60Hz
Dryer Type: Electric
Steam System: SteamFresh™ and TurboSteam™
Sensor Technology: Moisture Sensor Dry
Control Type: Electronic with LED display
Connectivity: Wi-Fi enabled with LG ThinQ
Dimensions: 27" W x 30" D x 39" H
Weight: 125 lbs

Controls and Settings

Access controls via front panel or LG ThinQ app.

Control Panel: POWER, CYCLE SELECTION, TEMPERATURE, DRYNESS LEVEL, STEAM, START/PAUSE, CHILD LOCK.

Drying Cycles: COTTON, PERMANENT PRESS, DELICATES, QUICK DRY, BEDDING, SPORTS WEAR. Settings: Temperature (High, Medium, Low, No Heat), Dryness Level (More Dry, Normal, Less Dry), Steam Options (SteamFresh, TurboSteam), Delay Start (1-12 hours).

Connecting to Power

Requires dedicated 240V outlet with proper grounding.

Turn off power at circuit breaker before connecting.
Use 4-prong dryer cord (not included).
Connect wires to terminal block: Black/Red to hot, White to neutral, Green to ground.
Secure strain relief and restore power.

Tip: Have installation performed by qualified electrician if unsure.

Using Drying Cycles

Select appropriate cycle for fabric type and drying needs.

Load clothes: Do not overload; leave space for air circulation.
Select cycle: Turn cycle selector to desired setting.
Adjust settings: Set temperature and dryness level as needed.
Start drying: Press START/PAUSE button.
Monitor progress: LED display shows time remaining.
End of cycle: Signal sounds when drying complete.

WARNING! Clean lint filter before each use. Do not dry items containing foam or plastic.

Steam Features

Use steam functions for refreshing and wrinkle removal.

SteamFresh: Adds steam during cycle to reduce wrinkles.
TurboSteam: Dedicated cycle for quick wrinkle removal.
Add water: Ensure water reservoir is filled for steam cycles.
Select steam option: Press STEAM button for desired function.

Care & Cleaning

Regular maintenance ensures optimal performance and longevity.

Lint filter: Clean before every load.
Exhaust vent: Inspect and clean every 6 months.
Exterior: Wipe with damp cloth, mild detergent if needed.
Drum: Wipe with soft cloth, avoid abrasives.

CAUTION! Unplug dryer before cleaning. Do not use harsh chemicals.

Regulatory Information

UL listed; complies with US safety standards. Energy Star® certified for energy efficiency. Copyright © 2025 LG Electronics; all rights reserved. For support, visit www.lg.com or contact 1-800-243-0000.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Dryer won't start	Power/door	Check power connection; ensure door fully closed.
Clothes not drying	Lint/venting	Clean lint filter; check venting for obstructions.
Noise during operation	Objects in drum	Check for foreign objects; ensure load balanced.
Error codes displayed	System faults	Refer to error code chart in manual; reset if needed.
Steam not working	Water supply	Check water reservoir; ensure filled properly.

Reset: Unplug for 1 minute, then restart.

Service: 1-800-243-0000; www.lg.com