The LG DLEC855W is an electric dryer featuring advanced drying technology, multiple drying cycles, sensor drying capabilities, steam refresh option, large capacity drum, LED display, touch controls, and energy-efficient operation. Below are key sections for safety precautions, technical specifications, installation procedures, operation instructions, maintenance guidelines, troubleshooting, and parts information.
Key components: Large capacity stainless steel drum, LED display, touch control panel, lint filter, exhaust system, heating element, moisture sensors, and steam generator.
| Component | Description |
|---|---|
| Drum Capacity | 7.4 cubic feet stainless steel drum |
| Control Panel | LED display with touch controls |
| Drying Technology | Sensor Dry with moisture detection |
| Steam Function | Steam Refresh and Steam Sanitary cycles |
| Heating System | Electric heating element |
| Lint Filter | Front-loading removable filter |
| Exhaust System | 4-inch diameter exhaust vent |
| Power Requirements | 240V AC, 30A dedicated circuit |
| Dimensions | 27" W x 29" D x 39" H |
| Weight | 125 lbs |
Proper installation is critical for safe operation and optimal performance.
WARNING! Installation must be performed by qualified technician. Improper installation can cause fire hazard.
Basic operation procedures for daily use.
CAUTION! Do not dry items containing foam, rubber, or plastic.
Detailed description of control panel features and settings.
Primary Controls: POWER, START/PAUSE, CYCLE SELECTOR, OPTIONS, STEAM
Display: LED showing cycle time, settings, and error codes
Cycles: Normal, Heavy Duty, Delicates, Quick Dry, Air Fluff, Sensor Dry, Steam Refresh, Steam Sanitary, Wrinkle Care, Timed Dry, Energy Saver, Rack Dry
Options: Temperature (High, Medium, Low, No Heat), Dryness Level (More Dry, Less Dry), Delay Start, Signal Volume, Child Lock
Steam Functions: Steam Refresh (30 minutes), Steam Sanitary (anti-allergen)
Regular maintenance ensures optimal performance and longevity.
WARNING! Always unplug dryer before performing any maintenance.
Common error codes and their meanings.
| Error Code | Description | Action Required |
|---|---|---|
| dE1 | Door open error | Close door properly |
| tE1 | Temperature sensor error | Check temperature sensor |
| tE2 | Heating element error | Inspect heating element |
| LE1 | Motor error | Check drive motor |
| FE1 | Communication error | Reset main control board |
| OE | Overheating error | Check venting system |
| PF | Power failure | Reset cycle after power returns |
| Symptom | Possible Cause | Corrective Action |
|---|---|---|
| Dryer won't start | Door not closed, power issue | Ensure door closed, check power supply |
| No heat | Heating element, thermal fuse | Test heating element and thermal fuse |
| Long drying times | Vent blockage, overload | Clean vent system, reduce load size |
| Unusual noise | Foreign objects, worn parts | Check for objects, inspect rollers/belt |
| Clothes too dry/wet | Sensor issue, settings | Clean moisture sensors, adjust settings |
| Error codes displayed | Various system faults | Refer to error code section |
| Steam function not working | Water supply, steam generator | Check water connection, steam system |
Common replacement parts for DLEC855W model.
Electrical schematics and wiring information for service technicians.
Main Power Circuit: 240V input through terminal block to main control board
Heating Circuit: Control board to heating element through thermal cutoffs
Motor Circuit: Control board to drive motor with speed control
Control Circuit: User interface to main board communication
Sensor Circuit: Moisture sensors and temperature sensors to control board
Steam Circuit: Water valve control and steam generator operation
NOTE: Complete wiring diagrams available in technical supplement manual.
Critical safety precautions for installation, operation, and service.
EMERGENCY: In case of fire, disconnect power immediately and contact fire department.
Service Support: 1-800-243-0000; www.lg.com