The LG DLE2515S is a 7.4 cu. ft. electric dryer with advanced drying technologies, multiple drying cycles, moisture sensor, wrinkle care option, and energy-efficient operation. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.
Key components: Large capacity drum, electronic controls, moisture sensor, lint filter, exhaust system, and multiple drying options.
| Feature | Description |
|---|---|
| Capacity | 7.4 cubic feet drying capacity |
| Moisture Sensor | Automatically detects moisture levels for optimal drying |
| Drying Cycles | Multiple cycles including Normal, Delicates, Heavy Duty |
| Wrinkle Care | Tumble without heat to reduce wrinkles |
| Lint Filter | Easy-clean removable lint filter |
| Control Panel | Electronic touch controls with LED display |
| Door | Reversible door for flexible installation |
| Power Requirements | 240V, 60Hz electrical connection |
| Safety Features | Thermal cutoff, door switch, overheating protection |
| Energy Efficiency | ENERGY STAR certified |
Unpack and inspect contents. Place on level surface near proper electrical outlet.
WARNING! Dryer is heavy; use two people for handling. Ensure proper electrical grounding.
Complete installation before first use.
CAUTION! Never operate without lint filter. Keep area around dryer clear.
Electronic control panel with cycle selection, temperature settings, and options.
Cycle Selection: Normal, Delicates, Heavy Duty, Timed Dry, Air Fluff, Wrinkle Care.
Temperature Settings: High, Medium, Low, No Heat. Options: Wrinkle Care, Signal, End of Cycle. Display: LED shows remaining time, cycle status, and error codes.
Requires dedicated 240V, 60Hz, 30A electrical circuit.
Tip: Have installation performed by qualified electrician.
Supports various fabric types and drying needs.
WARNING! Do not dry items containing foam, rubber, or plastic. Clean lint filter regularly.
Moisture Sensor: Automatically adjusts drying time based on moisture levels. Wrinkle Care: Tumbles without heat for up to 150 minutes. Lint Alert: Reminds to clean lint filter.
Unplug before cleaning. Clean lint filter after every use. Wipe exterior with damp cloth. Clean exhaust system annually.
CAUTION! Do not use abrasive cleaners. Keep ventilation openings clear.
UL listed; complies with FCC Part 15. ENERGY STAR certified. Copyright © 2025 LG Electronics; all rights reserved. For support, visit www.lg.com or contact 1-800-243-0000.
| Symptom | Possible Cause | Corrective Action |
|---|---|---|
| Dryer won't start | Power/door | Check power connection; ensure door is fully closed. |
| No heat | Circuit breaker/thermostat | Check circuit breaker; verify proper voltage; check thermal fuse. |
| Long drying times | Lint/ventilation | Clean lint filter; check exhaust vent for blockages. |
| Unusual noise | Objects/rollers | Check for objects in drum; inspect rollers and bearings. |
| Error codes | Various issues | Refer to error code chart in manual; reset if needed. |
Reset: Unplug for 1 minute, then restart.
Service: 1-800-243-0000; www.lg.com