LG Direct Dry LDF9932ST Manual

The LG Direct Dry LDF9932ST is a high-performance electric dryer with advanced drying technologies, multiple drying cycles, moisture sensor, wrinkle care options, and energy-efficient operation. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting to Power 7. Operating the Dryer 8. Special Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Direct Drive Motor, LED Control Panel, Lint Filter, Moisture Sensor, Multiple Drying Cycles, Wrinkle Care Option.

Feature	Description
Direct Drive Motor	10-year warranty, quiet operation, reduced vibration
LED Control Panel	Easy-to-read display with touch controls
Moisture Sensor	Automatically detects dryness level for optimal drying
Lint Filter	Easy-clean filter for efficient airflow
Multiple Drying Cycles	Cotton, Mixed, Delicates, Quick Dry, Heavy Duty
Wrinkle Care	Tumble without heat to reduce wrinkles
Energy Efficient	ENERGY STAR certified for reduced energy consumption
Steam Refresh	Reduces odors and refreshes clothes between washes
Child Lock	Prevents accidental changes to settings
Door Reversal	Optional left or right door opening

Installation

Unpack and inspect contents. Place on level surface near electrical outlet.

Remove shipping materials: Remove all tapes, brackets, and protective covers.
Level the dryer: Adjust leveling legs to ensure dryer is stable and level.
Connect exhaust vent: Use 4-inch diameter metal duct for proper ventilation.
Connect to power: Use dedicated 240V outlet with proper grounding.

WARNING! Dryer is heavy; use two people for installation. Ensure proper ventilation to prevent fire hazard.

First-Time Setup

After installation, perform initial setup before first use.

Clean lint filter: Remove and clean lint filter before first use.
Run empty cycle: Run dryer empty for 20 minutes to remove manufacturing residues.
Set preferences: Configure default settings, language, and sound options.
Test moisture sensor: Run test cycle to ensure moisture sensor is working properly.

CAUTION! Ensure dryer is properly leveled and exhaust vent is securely connected.

Specifications

Capacity: 7.4 cubic feet
Power Source: 240V, 60Hz
Dimensions: 27" W x 29" D x 38" H
Drying System: Sensor Dry with moisture detection
Motor: Direct Drive with 10-year warranty
Control Type: LED electronic with touch controls
Cycles: 12 drying cycles including Steam Refresh
Energy Rating: ENERGY STAR certified
Weight: 125 lbs
Color: Stainless Steel

Controls and Settings

Access settings via LED control panel. Front Panel: POWER, CYCLE SELECTION, TEMPERATURE, OPTIONS, START/PAUSE.

Control Panel: POWER, Cycle buttons, Temperature selection, Options (Wrinkle Care, Child Lock, Signal), Start/Pause, Delay Start.

Drying Cycles: Cotton, Mixed, Delicates, Quick Dry, Heavy Duty, Air Fluff, Steam Refresh. Temperature Settings: High, Medium, Low, No Heat. Options: Wrinkle Care, Child Lock, End of Cycle Signal, Delay Start (1-12 hours). Settings: Language selection, Sound on/off, Default settings.

Connecting to Power

Electrical requirements: 240V dedicated circuit with proper grounding.

Turn off power at circuit breaker before connecting.
Use 4-wire power cord (not included) with proper rating.
Connect ground wire to dryer frame and electrical box.
Ensure all connections are tight and secure.

Tip: Have installation performed by qualified electrician if unsure about electrical connections.

Operating the Dryer

Supports various fabric types and drying needs.

Load clothes: Do not overload; leave space for proper tumbling.
Select cycle: Choose appropriate cycle for fabric type.
Set temperature: Select temperature setting based on fabric care labels.
Start dryer: Press START/PAUSE to begin drying cycle.
Monitor progress: LED display shows remaining time and cycle status.
Clean lint filter: Clean after every use for optimal performance.
Unload promptly: Remove clothes immediately after cycle to reduce wrinkles.

WARNING! Do not dry items containing foam, rubber, or plastic. Clean lint filter regularly to prevent fire hazard.

Special Features

Steam Refresh: Reduces odors and refreshes clothes without washing. Wrinkle Care: Tumbles clothes without heat to reduce wrinkles. Child Lock: Prevents accidental changes to settings. Moisture Sensor: Automatically adjusts drying time based on moisture level.

Care & Cleaning

Unplug before cleaning. Clean lint filter after every use. Wipe exterior with damp cloth; no harsh chemicals.

CAUTION! Do not use abrasive cleaners; keep ventilation system clean and unobstructed.

Regulatory Information

Troubleshooting

Symptom	Possible Cause	Corrective Action
Dryer not starting	Power/door	Check power connection; ensure door is fully closed.
Clothes not drying	Lint/ventilation	Clean lint filter; check vent for obstructions.
Unusual noise	Objects/installation	Check for objects in drum; ensure dryer is level.
Error codes displayed	Sensor/system	Refer to error code chart in manual; reset if needed.
Cycle time too long	Moisture sensor	Clean moisture sensor; check for proper loading.

Reset: Unplug for 1 minute then restart if available.

Service: 1-800-243-0000; www.lg.com