LG Direct Drive Dryer Manual

The LG Direct Drive Dryer is a high-efficiency laundry appliance featuring direct drive motor technology for quiet operation and durability, multiple drying cycles including Normal, Delicates, Heavy Duty, and Quick Dry, moisture sensor for automatic drying time adjustment, wrinkle care option, child lock, energy-saving modes, and stainless steel drum. Powered by 120V AC, 60Hz. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting to Power 7. Using Drying Cycles 8. Safety Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Direct Drive Motor, Stainless Steel Drum, Control Panel, Lint Filter, Exhaust Vent, Power Cord.

Feature	Description
Direct Drive Motor	Quiet operation with 10-year warranty
Moisture Sensor	Automatically detects dryness level and adjusts time
Stainless Steel Drum	Durable and gentle on fabrics
Multiple Drying Cycles	Normal, Delicates, Heavy Duty, Quick Dry, Air Fluff
Wrinkle Care Option	Tumbles clothes periodically after cycle ends
Child Lock	Prevents accidental changes to settings
Energy Saving Mode	Reduces power consumption
Lint Filter	Easy-clean filter for optimal airflow
Door Reversal	Optional left or right door opening
Delay Start	Set drying to begin later

Installation

Unpack and inspect contents. Place on level surface.

Choose location: Level, solid floor with proper ventilation.
Remove shipping materials: Remove all bolts and packing materials.
Connect exhaust vent: Use 4-inch diameter metal ducting.
Level the dryer: Adjust leveling legs as needed.
Connect to power: Use dedicated 120V outlet.

WARNING! Dryer is heavy; use two people for moving. Ensure proper ventilation for exhaust.

First-Time Setup

After installation, perform initial setup.

Check installation: Verify all shipping materials removed.
Connect power: Plug into dedicated 120V outlet.
Test operation: Run empty on Normal cycle for 10 minutes.
Set preferences: Configure default settings and child lock if needed.
Clean lint filter: Ensure filter is clean before first use.

CAUTION! Do not operate without removing shipping bolts. Ensure exhaust vent is properly connected.

Specifications

Capacity: 7.4 cubic feet
Motor: Direct Drive with 10-year warranty
Drum Material: Stainless steel
Drying Cycles: Normal, Delicates, Heavy Duty, Quick Dry, Air Fluff, Timed Dry
Special Features: Moisture Sensor, Wrinkle Care, Child Lock, Delay Start
Power Requirements: 120V AC, 60Hz
Energy Rating: ENERGY STAR certified
Dimensions: 27" W x 29" D x 38" H
Weight: 125 lbs

Controls and Settings

Control Panel: POWER, CYCLE SELECTION, TEMPERATURE, OPTIONS, START/PAUSE.

Cycle Options: Normal (cotton), Delicates (low heat), Heavy Duty (high heat), Quick Dry (30 min), Air Fluff (no heat), Timed Dry (manual).

Temperature Settings: High, Medium, Low, No Heat. Options: Wrinkle Care, Child Lock, Signal Volume, Delay Start. Moisture Sensor: Automatically adjusts drying time based on load dryness.

Connecting to Power

Requires dedicated 120V, 60Hz grounded outlet.

Turn off power at circuit breaker.
Use proper power cord (included).
Connect to dedicated outlet.
Ensure proper grounding.
Restore power and test operation.

Tip: Use surge protector for added protection. Do not use extension cords.

Using Drying Cycles

Follow these steps for optimal drying results.

Load dryer: Do not overload; leave space for tumbling.
Select cycle: Choose appropriate cycle for fabric type.
Set temperature: Select heat setting (High, Medium, Low, No Heat).
Add options: Enable Wrinkle Care or Delay Start if desired.
Start cycle: Press START; dryer will begin operation.
Monitor progress: Moisture sensor will adjust time automatically.
Remove promptly: Take out clothes when cycle completes.
Clean lint filter: Clean after every use for optimal performance.

WARNING! Do not dry rubber, plastic, or flammable materials. Clean lint filter regularly.

Safety Features

Child Lock: Prevents accidental changes to settings. Overheat Protection: Automatically shuts off if overheating detected. Door Safety Switch: Stops operation when door opened.

Care & Cleaning

Unplug before cleaning. Wipe exterior with damp cloth. Clean lint filter after every use. Clean exhaust vent every 6 months.

CAUTION! Do not use abrasive cleaners. Keep area around dryer clean and free of lint.

Regulatory Information

Troubleshooting

Symptom	Possible Cause	Corrective Action
Dryer won't start	Power/door	Check power connection; ensure door fully closed; check circuit breaker.
Clothes not drying	Lint/vent	Clean lint filter; check exhaust vent for blockage; verify proper heat setting.
Noisy operation	Objects/installation	Check for objects in drum; ensure level installation; verify shipping materials removed.
Error codes displayed	Sensor issues	Consult error code chart in manual; reset dryer; contact service if persistent.
Overheating	Ventilation	Clean lint filter; ensure proper exhaust ventilation; allow cool-down period.

Reset: Unplug for 5 minutes, then restart.

Service: 1-800-243-0000; www.lg.com