LG Direct Drive 9kg Manual

The LG Direct Drive 9kg washing machine features direct drive motor technology for quiet operation and durability, 9kg capacity, multiple wash programs including cotton, synthetic, delicate, wool, quick wash, and steam functions, energy efficiency rating, child lock, delay start, and various temperature settings. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water Supply 7. Using Wash Programs 8. Maintenance Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Direct Drive motor, 9kg capacity drum, control panel with digital display, water inlet valves, drain pump, detergent dispenser, and child lock feature.

Feature	Description
Direct Drive Motor	Direct connection to drum for quiet operation and longer lifespan
9kg Capacity	Large capacity for family laundry needs
Multiple Wash Programs	Cotton, Synthetic, Delicate, Wool, Quick Wash, Steam
Energy Efficiency	High energy rating for reduced electricity consumption
Child Lock	Prevents accidental program changes
Delay Start	Program start delay up to 24 hours
Steam Function	Steam wash for hygiene and stain removal
Digital Display	Shows program status and remaining time
Temperature Control	Multiple temperature settings from cold to 90°C
Spin Speed Control	Adjustable spin speeds up to 1400 RPM

Installation

Unpack and inspect contents. Place on level, stable floor.

Remove transit bolts: Use spanner to remove all transit bolts from rear.
Connect water supply: Attach hot and cold water hoses to corresponding inlet valves.
Connect drain hose: Place drain hose securely in standpipe or sink.
Level the machine: Adjust feet to ensure machine is perfectly level.
Plug into electrical outlet: Use grounded 3-pin outlet.

WARNING! Do not remove transit bolts before installation. Ensure water connections are tight to prevent leaks.

First-Time Setup

Power on machine; follow initial setup procedure.

Run initial test cycle: Select cotton program at 90°C without laundry.
Set language: Use settings menu to select preferred language.
Configure default settings: Set temperature, spin speed, and other preferences.
Test child lock: Enable and verify child lock function.

CAUTION! Ensure machine is level and all transit bolts are removed before first use.

Specifications

Capacity: 9kg
Motor Type: Direct Drive
Energy Rating: A+++
Water Consumption: Approximately 50 liters per cycle
Spin Speed: Up to 1400 RPM
Programs: Cotton, Synthetic, Delicate, Wool, Quick Wash, Steam, Rinse+Spin
Dimensions: 600mm x 850mm x 600mm (WxHxD)
Weight: 70kg
Power Supply: 220-240V, 50Hz
Noise Level: 50dB washing, 70dB spinning

Controls and Settings

Access functions via control panel. Main buttons: POWER, START/PAUSE, PROGRAM SELECTION, TEMPERATURE, SPIN SPEED.

Display: Shows selected program, remaining time, temperature, spin speed, and error codes.

Program Selection: Rotate dial to select desired wash program. Temperature: Cold, 30°C, 40°C, 60°C, 90°C. Spin Speed: No spin, 400, 600, 800, 1000, 1200, 1400 RPM. Options: Pre-wash, Extra rinse, Delay start, Child lock.

Connecting Water Supply

Hot and cold water inlet connections. Drain hose connection.

Turn off water supply before connecting hoses.
Connect blue hose to cold water supply, red hose to hot water supply.
Ensure hose connections are tight and secure.
Place drain hose in standpipe or over sink edge.
Check for leaks after turning water supply on.

Tip: Use hose clips provided for secure connections.

Using Wash Programs

Supports various fabric types and soil levels.

Load laundry: Open door, load clothes evenly around drum.
Add detergent: Pour detergent into main wash compartment of dispenser.
Select program: Turn program dial to desired wash cycle.
Adjust settings: Set temperature, spin speed, and additional options.
Start cycle: Press START/PAUSE button.
Steam function: Select steam program for hygiene refresh or stain treatment.
Quick wash: 15-30 minute cycle for lightly soiled items.
Delay start: Set delayed start time using delay button.

WARNING! Do not overload machine. Balance load evenly in drum.

Maintenance Features

Self-cleaning program: Run every 30 cycles to clean drum and internal components. Error code display: Shows fault codes for troubleshooting. Filter cleaning: Access and clean drain filter monthly.

Care & Cleaning

Unplug before cleaning. Wipe exterior with damp cloth. Clean detergent dispenser monthly. Clean door seal regularly. Run drum clean program every 30 cycles.

CAUTION! Do not use abrasive cleaners. Keep control panel dry.

Regulatory Information

CE certified: Complies with European safety standards. Energy label: A+++ rating. Water efficiency: Meets EU water efficiency standards. For support, visit www.lg.com or contact LG customer service at 0344 847 5454.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine won't start	Power/door	Check power supply; ensure door is properly closed.
No water intake	Water supply/taps	Check water taps are on; ensure hoses not kinked.
Water not draining	Drain hose/filter	Check drain hose position; clean drain filter.
Excessive vibration	Transit bolts/leveling	Ensure transit bolts removed; check machine is level.
Error codes displayed	Various faults	Refer to error code list in manual; reset machine.

Reset: Unplug for 5 minutes then restart.

Service: 0344 847 5454; www.lg.com/uk/support