LG Direct Drive 9/6kg Manual

The LG Direct Drive 9/6kg washing machine features direct drive motor technology for quiet operation and durability, 9kg washing capacity, 6kg drying capacity, multiple wash programs, energy efficiency, child lock, delay start, and smart diagnosis system. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Utilities 7. Using Wash Programs 8. Safety Features 9. Care & Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Direct Drive motor, LED display, control panel, detergent dispenser, drum, water inlet valves, drain pump.

FeatureDescription
Direct Drive MotorDirect connection to drum for quiet operation and reliability
Wash Capacity9kg maximum load capacity
Dry Capacity6kg maximum drying capacity
LED DisplayShows time remaining, cycle status, and settings
Control PanelProgram selection and customization buttons
Detergent DispenserCompartments for detergent, softener, and bleach
Water Inlet ValvesHot and cold water connections
Drain PumpAutomatic water drainage system
Child LockPrevents accidental program changes
Delay StartProgram start delay up to 24 hours

Installation

Unpack and inspect contents. Place on level, stable surface.

  1. Remove transit bolts: Use wrench to remove all transit bolts from rear.
  2. Connect water supply: Attach hot and cold water hoses to corresponding valves.
  3. Connect drain hose: Secure drain hose to standpipe or sink.
  4. Level the machine: Adjust feet to ensure machine is perfectly level.
  5. Plug into grounded electrical outlet.

WARNING! Do not remove transit bolts before installation. Ensure water connections are tight to prevent leaks.

First-Time Setup

Plug in machine; run initial setup cycle.

  1. Run cleaning cycle: Select Tub Clean program and run without laundry.
  2. Set preferences: Configure default settings like temperature, spin speed.
  3. Test operation: Run short cycle to verify proper function.
  4. Program selection: Familiarize yourself with available wash programs.

CAUTION! Ensure machine is level and all protective materials are removed before first use.

Specifications

Controls and Settings

Access programs via control panel or remote control (if applicable).

Control Panel: POWER, PROGRAM SELECTION, TEMPERATURE, SPIN SPEED, START/PAUSE, OPTION BUTTONS.

Programs: COTTON, SYNTHETIC, DELICATE, QUICK WASH, WOOL, SPORTSWEAR. Settings: Temperature (Cold-90°C), Spin Speed (No Spin-1400 RPM), Options (Pre Wash, Extra Rinse, Delay Start). Special Functions: Steam, Allergy Care, TurboWash, Child Lock.

Connecting Utilities

Water Supply: Hot and cold water connections. Drain: Hose to standpipe or sink. Electrical: Grounded outlet.

  1. Turn off water supply before connecting hoses.
  2. Use only approved hoses and fittings.
  3. Ensure drain hose is not kinked or restricted.
  4. Verify electrical outlet is properly grounded.

Tip: Install drip tray if machine is on upper floor to prevent water damage.

Using Wash Programs

Supports various fabric types and soil levels.

  1. Load laundry: Do not exceed maximum capacity.
  2. Add detergent: Use appropriate compartment for detergent type.
  3. Select program: Choose based on fabric type and soil level.
  4. Adjust settings: Modify temperature, spin speed as needed.
  5. Start cycle: Press START/PAUSE button.
  6. Monitor progress: LED display shows time remaining.
  7. Unload promptly: Remove laundry immediately after cycle completion.

WARNING! Do not overload machine. Balance load properly to prevent vibration.

Safety Features

Child Lock: Prevents program changes during operation. Door Lock: Automatic locking during wash cycles. Overflow Protection: Prevents water overflow. Imbalance Detection: Stops operation if load is unbalanced.

Care & Maintenance

Regular cleaning prevents odors and maintains performance.

  1. Clean detergent dispenser monthly.
  2. Run Tub Clean program every 30 cycles.
  3. Wipe door seal and glass regularly.
  4. Clean drain pump filter every 3 months.

CAUTION! Unplug machine before cleaning. Use only mild detergents for cleaning.

Regulatory Information

CE certified: Complies with European safety standards. Energy Label: A+++ rating for energy efficiency. RoHS compliant: Free of hazardous substances. For support, visit www.lg.com or contact LG customer service at local service center.

Troubleshooting

SymptomPossible CauseCorrective Action
Machine won't startPower/doorCheck power connection; ensure door is properly closed.
No water fillingWater supplyCheck water valves are open; verify hose connections.
Excessive vibrationLoad/levelingRedistribute load evenly; check machine is level.
Water not drainingDrain hoseCheck for kinks; clean drain pump filter.
Error codes displayedVarious issuesRefer to error code chart in manual; reset machine.

Reset: Unplug for 1 minute then restart.

Service: Contact LG authorized service center; www.lg.com

LG Direct Drive 9/6kg Manual © - All Rights Reserved 2025