LG Direct Drive 8.5 Washing Machine Manual

The LG Direct Drive 8.5 is a high-efficiency front-load washing machine with 8.5kg capacity, direct drive motor technology, multiple wash programs, energy-saving features, steam function, smart diagnosis, and child lock. Below are key sections for safety, features, installation, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Utilities 7. Wash Programs 8. Special Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Direct Drive Motor, LED Display, Control Panel, Door Lock, Detergent Dispenser, Water Inlet Valves, Drain Pump.

FeatureDescription
Direct Drive MotorDirect connection to drum for quieter operation and longer lifespan
8.5kg CapacityLarge capacity for family-sized loads
Steam FunctionSteam refresh and allergy care cycles
Smart DiagnosisAutomatically diagnoses issues via sound analysis
6 Motion DD TechnologyMultiple wash motions for different fabric types
LED DisplayClear time and cycle information
Child LockPrevents accidental program changes
Energy SavingMeets energy efficiency standards
Multiple Wash ProgramsCotton, Synthetic, Quick Wash, Delicates, etc.
Delay StartProgram start time up to 19 hours

Installation

Unpack and inspect contents. Place on level, solid floor.

  1. Remove transit bolts: Use wrench to remove all transit bolts from rear.
  2. Connect water supply: Attach hot and cold water hoses to corresponding valves.
  3. Connect drain hose: Secure drain hose to standpipe or sink.
  4. Level the machine: Adjust leveling feet until machine is stable.
  5. Plug into grounded electrical outlet.

WARNING! Do not remove transit bolts before installation. Ensure water connections are tight to prevent leaks.

First-Time Setup

After installation, perform initial setup.

  1. Run empty cycle: Select Cotton program at 90°C without laundry.
  2. Set language: Press and hold Temp and Spin buttons simultaneously for 3 seconds.
  3. Test functions: Run quick wash cycle to verify operation.
  4. Program memory: Machine saves last used settings automatically.

CAUTION! Ensure all packaging materials and transit bolts are removed before first use.

Specifications

Controls and Settings

Control Panel: POWER, PROGRAM SELECTION, TEMPERATURE, SPIN SPEED, OPTION BUTTONS, START/PAUSE.

Program Selection: Cotton, Synthetic, Quick Wash, Delicates, Wool, Sportswear, Baby Care, Blanket, Rinse+Spin, Spin Only, Tub Clean, Steam Refresh, Allergy Care, Mixed Load.

Temperature Settings: Cold, 20°C, 30°C, 40°C, 60°C, 90°C. Spin Speed: No Spin, 400, 600, 800, 1000, 1200, 1400 RPM. Options: Pre Wash, Extra Rinse, Delay Start, Child Lock.

Connecting Utilities

Water Connections: Hot and cold water inlets. Drain: Drain hose connection. Electrical: Grounded power outlet.

  1. Turn off water supply before connecting hoses.
  2. Use only recommended hoses and fittings.
  3. Ensure drain hose is not kinked or bent sharply.
  4. Plug into dedicated grounded outlet.

Tip: Check for leaks after initial connection and first use.

Wash Programs

Select appropriate program for fabric type and soil level.

  1. Cotton: For cotton and linen items, high temperature options
  2. Synthetic: For synthetic fabrics, medium temperature
  3. Quick Wash: 30-minute cycle for lightly soiled items
  4. Delicates: Gentle cycle for delicate fabrics
  5. Wool: Special wool cycle with reduced agitation
  6. Steam Refresh: Steam function to remove wrinkles
  7. Allergy Care: Steam and extra rinses for allergen removal
  8. Tub Clean: Cleans drum and removes residue

WARNING! Do not wash items contaminated with flammable substances.

Special Features

6 Motion DD Technology: Rolling, Scrubbing, Filtration, Swing, Stepping, Tumbling motions. Smart Diagnosis: Hold POWER and TEMP buttons for 3 seconds to activate diagnosis. Child Lock: Press and hold CHILD LOCK button for 3 seconds. Delay Start: Set delayed start up to 19 hours.

Care & Cleaning

Regular maintenance ensures optimal performance.

  1. Clean detergent dispenser monthly
  2. Run Tub Clean program every 30 cycles
  3. Wipe door seal and glass after each use
  4. Clean drain pump filter every 3 months
  5. Leave door slightly open between washes

CAUTION! Unplug machine before cleaning. Do not use abrasive cleaners.

Regulatory Information

CE Certified: Complies with European safety standards. Energy Label: A+++ energy efficiency. WEEE Compliant: Proper disposal instructions. Copyright © 2024 LG Electronics; all rights reserved. For support, visit www.lg.com or contact LG Customer Service at 0344 844 3895.

Troubleshooting

SymptomPossible CauseCorrective Action
Machine won't startPower supply/doorCheck power connection; ensure door is properly closed
No water intakeWater supply/tapsCheck water taps are on; inspect hoses for kinks
Water not drainingDrain hose/filterCheck drain hose position; clean drain pump filter
Excessive vibrationLeveling/loadRe-level machine; redistribute load evenly
Unusual noiseForeign objectsCheck for coins or objects in drum; clean pump filter
Error codes displayedVarious issuesRefer to error code chart in manual; use Smart Diagnosis

Reset: Unplug for 1 minute then restart.

Service: 0344 844 3895; www.lg.com/uk/support

LG Direct Drive 8.5 Washing Machine Manual © - All Rights Reserved 2025