LG Direct Drive 7.5 kg WD13020D Manual

The LG Direct Drive 7.5 kg WD13020D is a front-loading washing machine with direct drive motor technology, 7.5 kg capacity, multiple wash programs, energy efficiency rating, child lock, delay start, and various specialized washing cycles. Below are key sections for safety, features, installation, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Utilities 7. Operating the Washer 8. Maintenance & Cleaning 9. Safety Features 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Direct Drive Motor, 7.5 kg Capacity, LED Display, Control Panel, Water Inlet Valves, Drain Pump, Door Lock.

FeatureDescription
Direct Drive MotorDirect connection to drum for quieter operation and longer lifespan
7.5 kg CapacitySuitable for medium to large households
LED DisplayShows remaining time, cycle progress, and error codes
Control PanelProgram selection, temperature, spin speed, and options
Water Inlet ValvesHot and cold water connections
Drain PumpAutomatic water drainage system
Door LockSafety lock during operation
Child LockPrevents accidental program changes
Delay StartProgram start delay up to 19 hours
Quick Wash30-minute rapid washing cycle

Installation

Unpack and inspect contents. Place on level, solid floor.

  1. Remove transit bolts: Use spanner to remove all transit bolts from rear.
  2. Connect water supply: Attach hot and cold water hoses to corresponding valves.
  3. Connect drain hose: Secure drain hose to standpipe or sink.
  4. Level the machine: Adjust leveling feet to ensure machine is stable.
  5. Plug into power outlet: Use grounded 3-pin socket.

WARNING! Do not remove transit bolts before installation. Ensure water connections are tight to prevent leaks.

First-Time Setup

After installation, run initial setup cycle.

  1. Check water connections: Ensure both hot and cold taps are open.
  2. Power on: Press POWER button on control panel.
  3. Run cleaning cycle: Select Drum Clean program without laundry.
  4. Set preferences: Configure default temperature, spin speed, and other settings.
  5. Test operation: Run quick wash cycle with small load to verify functionality.

CAUTION! Always remove transit bolts before first use. Keep installation area dry and well-ventilated.

Specifications

Controls and Settings

Control Panel: POWER, PROGRAM SELECTION, TEMPERATURE, SPIN SPEED, OPTIONS, START/PAUSE.

Programs: Cotton (40°C, 60°C, 90°C), Synthetic (30°C, 40°C), Quick Wash (30°C), Delicate (Cold), Wool (Cold), Drum Clean.

Options: Pre Wash, Extra Rinse, Delay Start, Child Lock, Speed Wash. Temperature: Cold, 30°C, 40°C, 60°C, 90°C. Spin Speed: No Spin, 400, 600, 800, 1000, 1200 RPM.

Connecting Utilities

Water Supply: Hot and cold water connections. Drain: Standpipe or sink connection. Power: Grounded electrical outlet.

  1. Turn off water supply and power before connecting.
  2. Connect hoses: Red to hot water, blue to cold water.
  3. Secure drain hose: Use provided clip to prevent slipping.
  4. Check for leaks: Turn on water supply and inspect connections.

Tip: Use thread seal tape on hose connections for better seal.

Operating the Washer

Follow these steps for normal operation.

  1. Load laundry: Open door, load clothes evenly in drum.
  2. Add detergent: Pour into detergent dispenser compartments.
  3. Select program: Turn program selector to desired wash cycle.
  4. Set options: Choose temperature, spin speed, and additional options.
  5. Start cycle: Press START/PAUSE button.
  6. Monitor progress: LED display shows remaining time.
  7. Remove laundry: When cycle completes, remove clothes promptly.

WARNING! Do not overload machine. Balance load evenly for optimal performance.

Maintenance & Cleaning

Regular maintenance ensures optimal performance and longevity.

  1. Clean detergent drawer: Remove and rinse monthly.
  2. Clean door seal: Wipe rubber seal to remove residue.
  3. Run drum clean: Monthly cycle without laundry.
  4. Clean filter: Check and clean drain filter every 3 months.
  5. Exterior cleaning: Wipe with damp cloth only.

CAUTION! Unplug machine before cleaning. Do not use abrasive cleaners.

Safety Features

Child Lock: Press and hold CHILD LOCK button for 3 seconds. Door Lock: Automatic locking during operation. Overflow Protection: Automatic shut-off if water level too high. Imbalance Detection: Adjusts spin speed if load unbalanced.

Regulatory Information

CE Certified: Complies with European safety standards. Energy Label: A+++ rating for energy efficiency. Water Efficiency: Meets EU water consumption standards. For support, visit www.lg.com or contact LG Customer Service at 0344 847 5454.

Troubleshooting

SymptomPossible CauseCorrective Action
Machine won't startPower/child lockCheck power connection; ensure child lock is off; close door properly.
No water intakeWater supply/tapsCheck water taps are open; inspect hoses for kinks; clean inlet filters.
Water not drainingDrain hose/filterCheck drain hose for blockages; clean drain filter; ensure proper height.
Excessive vibrationLeveling/loadRe-level machine; redistribute load evenly; remove transit bolts.
Door won't openWater/door lockWait for door lock to release; ensure water has drained; power cycle.

Reset: Unplug for 1 minute, then restart.

Service: 0344 847 5454; www.lg.com/uk/support

LG Direct Drive 7.5 kg WD13020D Manual © - All Rights Reserved 2025