The LG LHD30 is a 30-pint capacity dehumidifier designed for medium-sized rooms up to 1500 sq ft. Features include auto-restart, 24-hour timer, continuous drain option, washable filter, auto-defrost, humidity control (35%-80%), turbo mode, and energy-saving operation. Below are key sections for safety, features, installation, operation, maintenance, and troubleshooting.
Key components: Water tank with full indicator, continuous drain port, control panel with digital display, washable air filter, casters for mobility.
| Feature | Description |
|---|---|
| Capacity | 30 pints per day at 80°F/60% RH |
| Coverage Area | Up to 1500 square feet |
| Water Tank | 1.8 gallon capacity with full indicator |
| Continuous Drain | Garden hose connection for continuous operation |
| Digital Controls | Humidity setting, timer, mode selection |
| Auto Restart | Resumes previous settings after power interruption |
| 24-Hour Timer | Programmable on/off cycles |
| Washable Filter | Removable and reusable air filter |
| Auto Defrost | Prevents coil freezing in low temperatures |
| Turbo Mode | Maximum moisture removal speed |
Unpack and inspect contents. Place on level surface away from walls and furniture.
WARNING! Do not operate in temperatures below 41°F. Ensure proper ventilation around unit.
Power on dehumidifier; set initial operating parameters.
CAUTION! Allow unit to stand upright for 2 hours after moving before operation.
Control Panel: POWER, MODE, HUMIDITY, TIMER, FILTER RESET, TURBO.
Display: Current humidity, set humidity, timer status, filter alert, tank full indicator.
Modes: CONTINUOUS (runs constantly), AUTO (maintains set humidity), TURBO (maximum dehumidification). Humidity Control: Adjustable from 35% to 80% in 5% increments. Timer: 24-hour programmable on/off cycles. Filter Reset: Resets filter cleaning reminder after maintenance.
Three operating modes for different humidity control needs.
Tip: Use Auto mode for energy-efficient operation in most conditions.
Regular maintenance ensures optimal performance and longevity.
WARNING! Always unplug unit before performing any maintenance.
Two methods for water removal: manual tank emptying or continuous drain.
CAUTION! Ensure continuous drain hose is not kinked or blocked.
Unplug before cleaning. Clean exterior with soft, damp cloth. Wash filter with mild detergent and water.
CAUTION! Do not use harsh chemicals, abrasives, or excessive water. Never immerse unit in water.
UL Listed; complies with US safety standards. Energy Star certified. Refrigerant: R410A, EPA approved. For support, visit www.lg.com or contact LG Customer Service at 1-800-243-0000. Copyright © 2023 LG Electronics.
| Symptom | Possible Cause | Corrective Action |
|---|---|---|
| Unit not starting | Power/tank full | Check power connection; ensure tank is empty and properly seated. |
| Poor performance | Dirty filter/room temp | Clean air filter; ensure room temperature above 41°F. |
| Water leakage | Tank/drain issues | Ensure tank properly positioned; check drain hose connections. |
| Loud operation | Uneven surface | Place on level surface; check for loose components. |
| Ice on coils | Low temperature | Auto-defrost should activate; move to warmer location if persistent. |
Reset: Unplug for 5 minutes then restart.
Service: 1-800-243-0000; www.lg.com