LG D393 Service Manual

The LG D393 is a mobile device featuring advanced connectivity options, multimedia capabilities, and user-friendly interface. This service manual provides comprehensive technical information for service technicians, including disassembly procedures, troubleshooting guides, schematic diagrams, and replacement parts information. Below are key sections covering safety precautions, technical specifications, maintenance procedures, and repair instructions.

1. Product Overview 2. Technical Specifications 3. Safety Precautions 4. Disassembly Procedures 5. Component Locations 6. Circuit Diagrams 7. Troubleshooting Guide 8. Replacement Parts 9. Software Installation 10. Testing Procedures 11. Warranty Information

Product Overview

Key components: Mainboard, Display Assembly, Battery, Camera Modules, Connectivity Modules, and External Interfaces.

ComponentDescription
MainboardCentral processing unit with integrated memory and connectivity chips
Display AssemblyLCD touchscreen with digitizer and backlight system
BatteryLithium-ion rechargeable battery pack
Rear CameraPrimary camera module with autofocus and flash
Front CameraSecondary camera for video calls and selfies
ConnectivityWi-Fi, Bluetooth, and cellular modules
Audio SystemSpeaker, microphone, and audio codec
Charging PortUSB-C connector for charging and data transfer
ButtonsPower, volume, and function buttons
SensorsAccelerometer, proximity, light, and fingerprint sensors

Technical Specifications

Safety Precautions

Before performing any service procedures, read and follow all safety instructions.

  1. Always disconnect power source before disassembly
  2. Use approved tools and anti-static equipment
  3. Handle lithium-ion battery with care to prevent short circuits
  4. Follow proper ESD protection procedures
  5. Dispose of components according to local regulations

WARNING! High voltage components may retain charge even when powered off. Use appropriate safety equipment.

Disassembly Procedures

Step-by-step instructions for device disassembly.

  1. Power off device and remove SIM card tray
  2. Remove rear cover using suction cup and plastic opening tools
  3. Disconnect battery connector from mainboard
  4. Remove mounting screws and carefully lift mainboard
  5. Disconnect display flex cables and remove display assembly
  6. Remove camera modules and other peripheral components

CAUTION! Use proper tools to avoid damaging components and connectors.

Component Locations

Detailed diagram showing component positions on mainboard.

Reference DesignatorComponentLocation
U1Main ProcessorCenter of mainboard
U2Memory ChipTop right of processor
U3Power Management ICLeft side of mainboard
J1Display ConnectorTop edge of mainboard
J2Battery ConnectorBottom left of mainboard
J3Charging PortBottom center of mainboard
J4Camera ConnectorTop left of mainboard

Circuit Diagrams

Schematic diagrams for mainboard and power circuits.

Note: Refer to detailed schematic PDF for complete circuit analysis.

Troubleshooting Guide

SymptomPossible CauseCorrective Action
No powerBattery, charging circuitCheck battery voltage; test charging port; replace power IC
No displayDisplay, flex cable, mainboardTest display assembly; check flex connections; replace mainboard
No touch responseDigitizer, flex cableReplace digitizer; check flex cable connection
Camera not workingCamera module, softwareTest camera module; update software; check connections
No networkAntenna, RF componentsCheck antenna connections; test RF circuitry
OverheatingBattery, processorCheck battery condition; monitor processor temperature

Replacement Parts

Authorized replacement parts with part numbers.

Part NumberDescriptionCompatibility
LG-D393-MBMainboard AssemblyAll D393 models
LG-D393-DISPDisplay AssemblyD393 standard version
LG-D393-BATTBattery PackAll D393 variants
LG-D393-CAM-RRear Camera ModuleD393 with 12MP camera
LG-D393-CAM-FFront Camera ModuleAll D393 models
LG-D393-CHRGCharging Port AssemblyD393 USB-C version

Software Installation

Firmware update and software installation procedures.

  1. Download official firmware from LG support website
  2. Enter download mode (Volume Down + Power)
  3. Connect device to computer via USB
  4. Run LG Flash Tool and select firmware file
  5. Follow on-screen instructions to complete installation
  6. Device will reboot automatically after completion

WARNING! Use only official firmware to avoid device malfunction.

Testing Procedures

Post-repair testing and quality assurance.

Warranty Information

LG D393 comes with standard 12-month manufacturer warranty. Service performed by unauthorized technicians may void warranty. Keep original purchase receipt for warranty claims. For warranty service, contact LG authorized service centers only.

Service Support: 1-800-243-0000; www.lg.com/support

LG D393 Service Manual © - All Rights Reserved 2025