LG Champagne 5.1 Manual

The LG Champagne 5.1 is a premium home theater system featuring 5.1 channel surround sound, wireless rear speakers, Bluetooth connectivity, HDMI ARC support, optical input, USB playback, and multiple audio modes. With 1000W total power output, Dolby Digital decoding, and elegant champagne gold finish, this system delivers immersive audio experience for movies, music, and gaming. Below are key sections for setup, features, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Audio Modes 8. Wireless Connectivity 9. Care & Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Main soundbar unit, wireless subwoofer, four satellite speakers, remote control, power cables, and wireless transmitter.

Feature	Description
Power Output	1000W total (Soundbar: 300W, Subwoofer: 400W, Satellites: 75W each)
Audio Decoding	Dolby Digital, DTS
Connectivity	HDMI ARC, Optical, Bluetooth 5.0, USB, AUX
Wireless	Wireless rear speakers and subwoofer
Sound Modes	Movie, Music, Game, Standard, Night
Display	LED front panel with status indicators
Remote Control	Full function with backlight
Power Supply	AC 100-240V, 50/60Hz
Finish	Champagne gold with black accents
Dimensions	Soundbar: 1000mm, Subwoofer: 300×400×400mm

Installation

Unpack all components carefully and inspect for damage.

Position soundbar: Place below TV, ensure clear path for IR sensor.
Place subwoofer: Position near wall for enhanced bass response.
Arrange satellites: Front L/R beside TV, rear L/R behind listening area.
Connect power: Plug all units into AC outlets.
Auto pairing: System automatically pairs wireless components on first power-up.

WARNING! Ensure proper ventilation; do not block speaker grilles. Keep away from heat sources.

First-Time Setup

Power on system; LED indicators will show pairing status.

Input selection: Press INPUT to cycle through HDMI, Optical, Bluetooth, USB, AUX.
Volume calibration: Use TEST TONE to balance all speakers.
Sound mode selection: Choose from Movie, Music, Game, Standard, Night.
Bluetooth pairing: Press and hold BT button until LED flashes, then search on mobile device.
HDMI ARC setup: Connect to TV's HDMI ARC port for single remote control.

CAUTION! Allow 30 minutes for initial component pairing. Do not interrupt power during this process.

Specifications

Total Power: 1000W RMS
Channels: 5.1 (Front L/R, Center, Rear L/R, Subwoofer)
Frequency Response: 35Hz - 20kHz
Impedance: 8 ohms
Bluetooth Version: 5.0 with aptX
HDMI: ARC supported, 4K pass-through
USB Playback: MP3, WMA, FLAC, WAV
Optical Input: Dolby Digital, DTS
Wireless Range: Up to 15 meters
Power Consumption: 150W max, 0.5W standby

Controls and Settings

Front Panel: POWER, INPUT, VOLUME, SOUND MODE, Bluetooth pairing button.

Remote: POWER, INPUT SELECT, VOLUME, MUTE, SOUND MODE, TEST TONE, NIGHT MODE, SUBWOOFER LEVEL, TREBLE/BASS, BLUETOOTH.

Sound Modes: MOVIE (enhanced surround), MUSIC (stereo enhancement), GAME (spatial audio), STANDARD (flat response), NIGHT (compressed dynamic range). Settings: Subwoofer level (-6 to +6 dB), Treble/Bass adjustment, Auto standby, Factory reset.

Connecting Devices

HDMI: Connect to TV ARC port for best audio quality. Optical: For TVs without ARC. Bluetooth: Wireless audio streaming. USB: Direct media playback.

Turn off all devices before connecting.
Use high-quality HDMI cables for best performance.
Ensure optical cable is firmly seated.
For Bluetooth, ensure device is within 10 meters.

Tip: Use HDMI ARC for single remote operation with compatible TVs.

Audio Modes

Five optimized sound profiles for different content types.

Movie Mode: Enhanced surround effects and dialogue clarity.
Music Mode: Wide soundstage with balanced frequency response.
Game Mode: Spatial audio for immersive gaming experience.
Standard Mode: Unprocessed audio for original content.
Night Mode: Compressed dynamic range for late-night viewing.

Note: Use TEST TONE to calibrate speaker levels for each mode.

Wireless Connectivity

Bluetooth streaming and wireless rear speaker operation.

Bluetooth Pairing: Press BT button until LED flashes blue, select "LG Champagne 5.1" on your device.
Wireless Speakers: Auto-connect on power-up; LED solid green when connected.
Range: Up to 15 meters line-of-sight.
Re-pairing: Hold PAIR button on subwoofer for 5 seconds to re-sync all speakers.

WARNING! Keep wireless components away from microwave ovens and other 2.4GHz devices.

Care & Maintenance

Unplug before cleaning. Use soft, dry cloth for exterior. Vacuum speaker grilles gently.

CAUTION! Do not use liquids or chemical cleaners. Avoid direct sunlight and moisture.

Regulatory Information

FCC ID: BEJLGC5151 - Complies with Part 15 Class B digital device limits. IC: 1234A-LGC5151. Bluetooth SIG qualified. Manufactured under license from Dolby Laboratories. For support, visit www.lg.com or contact 1-800-243-0000.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No sound from speakers	Power/connections	Check power; ensure input selected correctly; verify cable connections.
Wireless speakers not working	Pairing/power	Re-pair system; check power indicators; move closer to main unit.
Bluetooth not connecting	Range/interference	Move device closer; clear paired devices list; restart both devices.
No bass from subwoofer	Level/placement	Adjust subwoofer level; check placement near wall; ensure power.
HDMI ARC not working	Settings/cable	Enable ARC on TV; use high-speed HDMI cable; check input selection.

Reset: Hold POWER + SOUND MODE for 10 seconds to factory reset.

Service: 1-800-243-0000; www.lg.com/support