LG CBV42-B Zero Client Manual

The LG CBV42-B Zero Client is a compact, energy-efficient computing device designed for virtual desktop infrastructure (VDI) environments. It features PCoIP technology, multiple connectivity options including DisplayPort and USB ports, network connectivity, and centralized management capabilities. Below are key sections for setup, features, configuration, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Connections 6. Network Configuration 7. Virtual Desktop Operation 8. Management Features 9. Maintenance & Care 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: PCoIP processor, DisplayPort output, USB ports, Ethernet connectivity, power adapter.

Feature	Description
DisplayPort	For monitor connection with high-resolution support
USB 2.0/3.0 ports	For peripheral devices (keyboard, mouse, etc.)
Ethernet port	For network connectivity to VDI host
Power connector	For DC power input
Audio jack	For headphone or speaker connection
PCoIP technology	For optimized virtual desktop performance
Power button	Turns device on/off
Status LED	Indicates power and connection status
Reset button	For factory reset when needed
Mounting options	VESA compatible for monitor mounting

Installation

Unpack and inspect contents. Position near monitor and network access point.

Connect monitor: Use DisplayPort cable to connect to compatible monitor.
Connect peripherals: Plug keyboard and mouse into USB ports.
Connect network: Use Ethernet cable to connect to network switch/router.
Connect power: Plug power adapter into device and wall outlet.

WARNING! Ensure proper ventilation; do not block air vents. Use recommended power adapter only.

First-Time Setup

Power on device; follow connection sequence.

Power up: Press power button; status LED should illuminate.
Network detection: Device will automatically detect network connection.
Server connection: Configure connection to VDI host server via network settings.
Peripheral setup: USB devices should auto-detect upon connection.

CAUTION! Ensure all cables are securely connected before powering on.

Specifications

Processor: PCoIP dedicated processor
Display Support: Up to 1920x1200 resolution
Connectivity: DisplayPort, USB 2.0/3.0, Ethernet 10/100/1000
Protocol: PCoIP for virtual desktop delivery
Power Consumption: Less than 10W typical
Operating Temp: 0°C to 40°C
Dimensions: Compact form factor
Weight: Lightweight design
Certifications: Energy Star, RoHS compliant

Controls and Connections

Front: Power button, status LED. Rear: DisplayPort, USB ports, Ethernet, power input, audio jack.

Connection sequence: Power > Network > Display > Peripherals

LED indicators: Green - normal operation, Orange - standby/network issue, Off - no power. USB support: Keyboard, mouse, webcam, storage devices. Audio: Built-in audio controller with headphone support.

Network Configuration

Automatic DHCP or manual IP configuration available.

Default: Device attempts DHCP auto-configuration.
Manual setup: Access configuration menu for static IP settings.
Server connection: Enter VDI host server address in configuration.
Network test: Verify connection to host server.

Tip: Ensure network firewall allows PCoIP protocol traffic.

Virtual Desktop Operation

Connects to VDI host for desktop virtualization.

Power on: Device boots and connects to configured host.
Authentication: Enter user credentials at login prompt.
Desktop session: Virtual desktop loads with full functionality.
Peripheral use: All connected USB devices work within virtual session.
Session management: Log off properly to end session.
Display settings: Adjust resolution via host desktop settings.
Audio routing: Audio streams from host to local audio jack.
Multiple monitors: Supported with additional zero clients.

WARNING! Do not disconnect during active session to avoid data loss.

Management Features

Centralized management via VDI administration console. Firmware updates: Deployable through management system. Configuration profiles: Apply settings across multiple devices.

Care & Cleaning

Unplug before cleaning. Use dry, lint-free cloth; avoid liquids and compressed air.

CAUTION! Do not open casing; no user-serviceable parts inside.

Regulatory Information

FCC Part 15: Class B digital device compliant. CE marked for European market. Energy Star certified for energy efficiency. Copyright © LG Electronics. For support, visit www.lg.com or contact LG customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No display	Cable/power issue	Check DisplayPort cable; verify monitor power and input source.
No network connection	Cable/DHCP issue	Check Ethernet cable; verify network connectivity; check DHCP settings.
USB devices not working	Port/device issue	Try different USB port; check device compatibility; restart session.
Cannot connect to host	Network/server issue	Verify server address; check network firewall settings.
Poor performance	Network bandwidth	Check network speed; reduce desktop resolution if needed.

Reset: Use reset button for 10 seconds to restore factory defaults.

Service: Contact LG support for hardware issues.