LG Bluetooth Headset Tone Manual

The LG Bluetooth Headset Tone is a wireless stereo headset featuring Bluetooth connectivity, noise cancellation, built-in microphone for calls, multi-point connectivity, voice assistant support, adjustable ear hooks, USB-C charging, up to 8 hours talk time, and intuitive controls. Below are key sections for safety, features, pairing, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation & Charging 3. First-Time Setup 4. Specifications 5. Controls and Functions 6. Connecting Devices 7. Using Voice Features 8. Care & Maintenance 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Bluetooth headset with stereo sound, built-in microphone, charging case, USB-C cable, ear tips in multiple sizes.

Feature	Description
Bluetooth version	5.0 with extended range
Battery life	Up to 8 hours talk time, 12 hours music
Charging case	Provides additional 24 hours of power
Noise cancellation	Active Noise Cancellation (ANC)
Voice assistant	Google Assistant and Siri support
Multi-point connectivity	Connect to two devices simultaneously
Water resistance	IPX4 sweat and water resistant
Controls	Touch controls and physical buttons
Microphone	Built-in dual microphones
Charging port	USB-C fast charging

Installation & Charging

Unpack and inspect contents. Choose appropriate ear tips for comfortable fit.

Initial charging: Connect USB-C cable to charging case and power source.
Charging indicator: LED shows charging status (red=charging, green=fully charged).
Headset placement: Insert headset securely in ears with proper ear hooks.
Case charging: Place headset in case for automatic charging.

WARNING! Use only approved charging accessories. Do not expose to water beyond IPX4 rating.

First-Time Setup

Power on headset and pair with your device.

Enter pairing mode: Press and hold power button until LED flashes blue/red.
Device pairing: Go to Bluetooth settings on your phone and select "LG Tone".
Connection confirmation: LED turns solid blue when connected.
Multi-device setup: Repeat pairing process for second device if needed.

CAUTION! Ensure headset is fully charged before first use for optimal performance.

Specifications

Bluetooth: Version 5.0, Class 2
Battery: 150mAh (headset), 500mAh (case)
Charging time: 2 hours (headset), 3 hours (case)
Standby time: Up to 150 hours
Frequency response: 20Hz - 20kHz
Driver size: 10mm dynamic drivers
Microphone: Dual MEMS microphones
Weight: 15g per earbud, 45g case
Operating range: Up to 10 meters

Controls and Functions

Access controls via touch surfaces and physical buttons on each earbud.

Left Earbud: Single tap - ANC on/off; Double tap - Voice assistant; Hold - Volume down.

Right Earbud: Single tap - Play/pause; Double tap - Next track; Triple tap - Previous track; Hold - Volume up.

Call Controls: Single tap - Answer/end call; Double tap - Reject call; Hold - Mute/unmute.

LED Indicators: Blue solid - Connected; Blue flashing - Pairing; Red flashing - Low battery; Red solid - Charging.

Connecting Devices

Pair with smartphones, tablets, computers, and other Bluetooth devices.

Ensure headset is in pairing mode (LED flashing blue/red).
Enable Bluetooth on your device and search for available devices.
Select "LG Tone" from the list of available devices.
Confirm pairing on both devices if prompted.

Tip: For multi-point connection, pair with first device, then enter pairing mode again for second device.

Using Voice Features

Access voice assistants and call functions with simple controls.

Voice assistant: Double tap left earbud to activate Google Assistant or Siri.
Voice commands: Use for calls, messages, music control, and navigation.
Call answering: Single tap either earbud to answer incoming calls.
Call rejection: Double tap either earbud to reject incoming calls.
Call transfer: Switch calls between headset and phone as needed.

WARNING! Do not use voice features while driving or in situations requiring full attention.

Care & Maintenance

Clean regularly with dry cloth; store in charging case when not in use.

Cleaning: Use dry, soft cloth to clean earbuds and case. Do not use liquids or chemicals.

Storage: Keep in charging case to protect from damage and maintain charge.

Battery care: Avoid complete discharge; charge when battery is low.

CAUTION! Do not expose to extreme temperatures or moisture beyond IPX4 rating.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Bluetooth SIG qualified. Copyright © 2024 LG Electronics; all trademarks property of LG Electronics. For support, visit www.lg.com or contact 1-800-243-0000.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Battery depleted	Charge headset in case for at least 30 minutes.
Connection issues	Distance/interference	Move closer to device; remove obstacles; reset Bluetooth connection.
Poor sound quality	Ear tip fit/ANC settings	Adjust ear tips for better seal; toggle ANC on/off.
No voice assistant	Device settings	Enable voice assistant on connected device; check permissions.
Charging problems	Cable/port issues	Use original USB-C cable; clean charging ports; ensure proper connection.

Reset: Place in case, hold both earbud buttons for 10 seconds until LEDs flash red/blue.

Service: 1-800-243-0000; www.lg.com/support