LG Bluetooth Headphones HBS 700 Manual

The LG HBS 700 are wireless Bluetooth stereo headphones featuring a neckband design, built-in microphone for hands-free calling, noise reduction technology, multi-point connectivity, voice guidance, and up to 10 hours of talk time. Compatible with Bluetooth-enabled devices including smartphones, tablets, and computers. Below are key sections for safety, features, pairing, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Neckband design with magnetic earbuds, Bluetooth connectivity, built-in microphone, voice guidance, multi-point connection.

Package Contents

Unpack and verify all components are present.

1. LG HBS 700 Bluetooth Headphones
2. USB charging cable
3. Additional ear tips (S/M/L sizes)
4. Quick start guide
5. Warranty information

NOTE! Contact retailer if any items are missing or damaged.

Charging the Headphones

Before first use, charge the headphones completely.

1. Connect USB cable to charging port on headphone control module.
2. Plug other end into USB power adapter or computer USB port.
3. Charging indicator turns red during charging.
4. Indicator turns blue when fully charged (approx. 2 hours).

CAUTION! Use only approved USB charger. Do not overcharge.

Specifications

• Bluetooth: Version 4.1, Class 2
• Battery: Lithium polymer, 150mAh
• Talk time: Up to 10 hours
• Standby time: Up to 300 hours
• Charging time: 2 hours
• Wireless range: Up to 10 meters (33 feet)
• Driver size: 10mm dynamic drivers
• Frequency response: 20Hz - 20kHz
• Weight: 50 grams
• Water resistance: IPX4 rating

Controls and Indicators

Control module located on right side of neckband.

Buttons: POWER, VOLUME UP/DOWN, PLAY/PAUSE, CALL, MULTI-FUNCTION

LED Indicators: Red - charging; Blue - fully charged/connected; Flashing blue - pairing mode

Voice Guidance: Announces battery level, connection status, power on/off

Pairing with Devices

Pair with Bluetooth-enabled devices for wireless audio.

1. Turn on headphones by pressing and holding POWER button.
2. Enter pairing mode (LED flashes blue).
3. On your device, enable Bluetooth and search for devices.
4. Select "LG HBS 700" from available devices list.
5. Confirm pairing if prompted (PIN: 0000).

Tip: For multi-point connection, pair with second device while connected to first.

Using Headphone Functions

Control music playback and calls with headphone buttons.

1. Play/Pause: Press PLAY/PAUSE button once.
2. Next track: Press and hold VOLUME UP button.
3. Previous track: Press and hold VOLUME DOWN button.
4. Answer call: Press CALL button once.
5. End call: Press CALL button once.
6. Reject call: Press and hold CALL button.
7. Voice assistant: Press and hold MULTI-FUNCTION button.
8. Magnetic auto-pause: Earbuds pause music when magnetically connected.

WARNING! Do not use while driving or in situations requiring full attention.

Voice Guidance Features

Voice announcements provide status information in multiple languages.

Battery level announcements: "Battery high," "Battery medium," "Battery low," "Please charge battery"

Connection status: "Power on," "Power off," "Connected," "Disconnected"

Language selection: English, Korean, Chinese, Japanese (factory default: English)

Care & Maintenance

Keep headphones clean and store properly when not in use.

1. Clean with dry, soft cloth only.
2. Do not use liquids or chemicals.
3. Store in protective case when not in use.
4. Keep away from extreme temperatures and moisture.
5. Replace ear tips if they become worn or damaged.

CAUTION! Do not immerse in water. IPX4 rating protects against splashes only.

Regulatory Information

FCC ID: BEJHBS700. This device complies with Part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference. Copyright © 2023 LG Electronics Inc. All rights reserved. For support, visit www.lg.com or contact LG Customer Service at 1-800-243-0000.

Troubleshooting

Reset: Press and hold POWER + VOLUME DOWN for 10 seconds to factory reset.

Service: 1-800-243-0000; www.lg.com