LG AS995 Service Manual

The LG AS995 is a professional service manual detailing technical specifications, disassembly procedures, troubleshooting guidelines, and repair instructions for the LG AS995 mobile device. This manual provides comprehensive information for qualified service technicians including circuit diagrams, component locations, test procedures, and safety precautions. Below are key sections covering safety, technical specifications, disassembly, troubleshooting, and repair procedures.

1. Safety Precautions 2. Technical Specifications 3. Disassembly Procedures 4. Component Locations 5. Circuit Diagrams 6. Test Procedures 7. Troubleshooting Guide 8. Repair Instructions 9. Parts List 10. Calibration Procedures 11. Service Tools

Safety Precautions

Essential safety guidelines for service technicians working on the LG AS995 device.

PrecautionDescription
ESD ProtectionAlways use anti-static wrist strap and mat
Power DisconnectRemove battery before servicing
Component HandlingHandle delicate components with care
Tool SafetyUse appropriate tools for each procedure
Battery SafetyFollow proper battery handling procedures
LCD HandlingAvoid pressure on LCD screen
Heat ApplicationUse controlled heat for component removal
Chemical SafetyFollow MSDS for all cleaning chemicals
WorkspaceMaintain clean, organized work area
DocumentationFollow procedures exactly as specified

Technical Specifications

Complete technical specifications and operating parameters for the LG AS995.

Disassembly Procedures

Step-by-step disassembly instructions for the LG AS995 device.

  1. Power off device and remove back cover
  2. Remove battery following proper safety procedures
  3. Remove SIM card and memory card trays
  4. Unscrew and remove main board cover
  5. Disconnect all ribbon cables and connectors
  6. Remove main board assembly
  7. Separate display assembly from chassis
  8. Remove camera modules and other components

WARNING! Follow ESD precautions. Document screw locations and connector positions.

Component Locations

Detailed component identification and location guide.

ComponentLocationReference
Main ProcessorCenter of main boardU100
Power Management ICUpper left main boardU201
RAM MemoryStacked with processorU101
Flash MemoryAdjacent to processorU102
RF TransceiverLower right main boardU301
Audio CodecNear audio jackU401
Camera ConnectorsTop left main boardJ501, J502
Display ConnectorCenter bottom main boardJ601
Battery ConnectorLower left main boardJ701
Charging PortBottom edge main boardJ801

Circuit Diagrams

Complete schematic diagrams for all major circuits.

Note: All diagrams include component values and test points.

Test Procedures

Comprehensive testing procedures for all device functions.

  1. Power-on test: Verify boot sequence and basic functionality
  2. Display test: Check for dead pixels and touch functionality
  3. Audio test: Verify speaker, microphone, and headphone operation
  4. Camera test: Test both front and rear cameras
  5. Connectivity test: Verify Wi-Fi, Bluetooth, and cellular functions
  6. Sensor test: Test all built-in sensors
  7. Battery test: Verify charging and power management
  8. Performance test: Stress test processor and memory

Troubleshooting Guide

Systematic troubleshooting procedures for common issues.

SymptomPossible CauseCorrective Action
No powerBattery, power circuitCheck battery voltage; test power management IC
No displayLCD, display circuitTest display connector; check LCD driver IC
No chargingCharging port, circuitInspect charging port; test charging IC
No networkRF circuit, antennaCheck antenna connections; test RF transceiver
No audioSpeaker, audio circuitTest audio codec; check speaker connections
Camera failureCamera module, circuitTest camera connectors; check camera IC
OverheatingProcessor, power circuitCheck thermal paste; test power consumption
Random shutdownBattery, power managementTest battery health; check power management IC

Repair Instructions

Detailed repair procedures for common component replacements.

  1. LCD replacement: Remove broken display, install new LCD assembly
  2. Battery replacement: Remove old battery, install new battery
  3. Charging port replacement: Desolder old port, install new port
  4. Camera replacement: Remove old camera module, install new module
  5. Speaker replacement: Remove old speaker, install new speaker
  6. Main board replacement: Transfer all components to new board
  7. Housing replacement: Complete disassembly and reassembly

CAUTION! Follow proper ESD procedures. Use recommended tools and techniques.

Parts List

Complete list of replacement parts and components.

Part NumberDescriptionQuantity
EAS995001Main Board Assembly1
EAS995002LCD Display Assembly1
EAS995003Battery 3000mAh1
EAS995004Rear Camera Module 16MP1
EAS995005Front Camera Module 8MP1
EAS995006Charging Port Assembly1
EAS995007Speaker Assembly1
EAS995008Housing Assembly1
EAS995009Flex Cable Set1
EAS995010Screw Kit1

Calibration Procedures

Device calibration and adjustment procedures.

Service Tools

Recommended tools and equipment for servicing the LG AS995.

  1. Anti-static wrist strap and mat
  2. Precision screwdriver set (Phillips #000, Torx T3-T6)
  3. Spudger and plastic opening tools
  4. Tweezers and hemostats
  5. Digital multimeter
  6. DC power supply with current limiting
  7. Hot air rework station
  8. Soldering iron with fine tip
  9. Magnifying lamp or microscope
  10. ESD-safe workbench

Note: Use only approved tools to avoid damage to components.

LG AS995 Service Manual © - All Rights Reserved 2025