lg an-mr 700instruction manual

The LG AN-MR 700 is a high-performance multimedia receiver with advanced audio processing, multiple input/output options, built-in amplifier, digital signal processing, Bluetooth connectivity, USB ports, AM/FM tuner, and comprehensive control capabilities. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: Digital audio processor, Bluetooth module, USB ports, AM/FM tuner, Remote Control, Multiple audio inputs/outputs, Power connector.

Installation

Unpack and inspect contents. Install in suitable location with proper ventilation.

1. Connect speakers: Use appropriate gauge speaker wire to terminal posts.
2. Connect audio sources: Use RCA cables for line-level inputs; digital cables for digital sources.
3. Connect antenna: Attach AM/FM antenna for radio reception.
4. Plug into AC power outlet.

WARNING! Ensure proper ventilation around unit; do not block cooling vents. Use correct speaker impedance.

First-Time Setup

Power on unit; follow initialization procedure.

1. Source selection: Press SOURCE to cycle through available inputs.
2. Radio tuning: Use TUNE buttons to find stations; press MEMORY to save presets.
3. Bluetooth pairing: Enter pairing mode and connect from your device.
4. Audio settings: Adjust bass, treble, balance, and DSP effects as desired.

CAUTION! Ensure all connections are secure before powering on.

Specifications

• Power Output: 50W x 4 channels RMS.
• Frequency Response: 20Hz - 20kHz.
• Signal-to-Noise Ratio: >90dB.
• Connectivity: Bluetooth 4.2, USB 2.0, RCA inputs/outputs.
• Tuner: AM/FM with 30 station presets.
• Supported formats: MP3, WMA, WAV, AAC.
• Power Source: 120V AC, 60Hz.
• Operating Temp: 0°C to 40°C.

Controls and Settings

Access settings via front panel controls or remote. Front Panel: POWER, SOURCE, VOLUME, TUNE, MENU.

Remote: POWER, Numeric buttons, SOURCE, VOLUME, MUTE, MENU, PRESET, DSP.

Audio: BASS, TREBLE, BALANCE, FADER, LOUDNESS. DSP: Various sound profiles (ROCK, POP, JAZZ, CLASSICAL). Source: Select between BT, USB, AUX, TUNER. System: Language, reset, firmware info.

Connecting Devices

Audio Inputs: AUX RCA, Digital inputs. USB: For storage and charging. Bluetooth: Wireless audio streaming.

1. Turn off unit before connecting devices.
2. Match cable types to appropriate ports.
3. Select corresponding source via SOURCE button.

Tip: Use high-quality cables for best audio performance.

Audio Source Operation

Supports USB playback, AUX input, radio, Bluetooth streaming.

1. USB playback: Insert USB device; unit will detect and begin playback.
2. Folder navigation: Use arrow buttons to browse files and folders.
3. Play modes: Repeat, shuffle, random play available.
4. Radio operation: Manual and automatic tuning; preset memory.
5. AUX input: Connect external audio source via RCA cables.

WARNING! Safely eject USB devices before removal.

Bluetooth Connectivity

Wireless audio streaming from compatible devices.

1. Enter pairing mode: Press and hold BT button until indicator flashes.
2. Search for device: On your phone/tablet, search for "LG AN-MR 700".
3. Connect: Select device from list; unit will confirm connection.
4. Play audio: Start playback on your device; audio will stream to unit.

Note: Connection range up to 10 meters.

Care & Maintenance

Unplug before cleaning. Use soft, dry cloth; avoid liquids and abrasive cleaners.

CAUTION! Do not use chemical cleaners; keep away from moisture and extreme temperatures.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits. Copyright © 2025 LG Electronics; all rights reserved. Bluetooth: Bluetooth SIG qualified. For support, visit www.lg.com or contact 1-800-243-0000.

Troubleshooting

Reset: Menu > System > Factory Reset if available.

Service: 1-800-243-0000; www.lg.com