LG AN-MR 700 Instruction Manual

The LG AN-MR 700 is a high-performance audio receiver with advanced connectivity options, multi-room audio capabilities, and smart sound optimization. Featuring Bluetooth connectivity, HDMI ARC support, optical/coaxial digital inputs, analog audio inputs, wireless streaming compatibility, and intuitive remote control. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Multi-Room Audio Setup 8. Smart Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Main receiver unit, Remote Control, Power cord, Antenna connectors, HDMI ports, Optical/Coaxial inputs, Analog audio jacks, Bluetooth pairing button.

Feature	Description
HDMI ARC	For audio return channel with compatible TVs
Bluetooth 5.0	For wireless audio streaming from devices
Optical Input	For digital audio connection
Coaxial Input	For digital audio connection
Analog Audio Inputs	RCA jacks for traditional audio sources
Multi-Room Output	Connect to additional speakers in other rooms
Power Button	Turns receiver on/off
Source Select	Cycles through input sources
Volume Control	Adjusts audio output level
Pairing Button	For Bluetooth device connection

Installation

Unpack and inspect contents. Place on stable, well-ventilated surface.

Connect audio sources: Use appropriate cables for HDMI, optical, coaxial, or analog inputs.
Connect speakers: Attach speaker wires to corresponding terminals.
Connect to TV: Use HDMI ARC port for best audio experience.
Plug into AC power outlet.

WARNING! Ensure proper ventilation around unit; do not block vents. Use correct speaker impedance.

First-Time Setup

Power on receiver; follow initial setup procedure.

Select language: Choose preferred language from setup menu.
Speaker configuration: Set up speaker channels and distances.
Input assignment: Assign names to different input sources.
Network setup: Connect to WiFi for smart features.
Bluetooth pairing: Pair with your mobile devices.

CAUTION! Ensure all connections are secure before powering on.

Specifications

Power Output: 100W per channel (8 ohms)
Audio Formats: Dolby Digital, DTS, PCM
Connectivity: Bluetooth 5.0, WiFi, Ethernet
Inputs: 4x HDMI, 2x Optical, 1x Coaxial, 3x Analog
Outputs: Speaker terminals, Subwoofer out, Headphone jack
Frequency Response: 20Hz - 20kHz
Power Consumption: 120W max
Dimensions: 430mm x 120mm x 320mm

Controls and Settings

Access settings via front panel or remote control. Front Panel: POWER, SOURCE, VOLUME, MENU, ENTER.

Remote: POWER, Numeric buttons, SOURCE SELECT, VOLUME, MUTE, MENU, NAVIGATION buttons, SETUP.

Audio Settings: Equalizer presets (Music, Movie, Voice), Bass/Treble adjustment, Balance control. System Settings: Network configuration, Bluetooth pairing, Firmware updates. Speaker Settings: Channel levels, Distance calibration, Crossover settings.

Connecting Devices

HDMI: Connect to HDMI ports for digital audio/video. Optical/Coaxial: For digital audio sources. Analog: RCA cables for traditional audio equipment.

Turn off receiver and devices before connecting.
Use high-quality cables for best performance.
Select appropriate input source via SOURCE button.
Configure input settings in menu if needed.

Tip: Label cables for easy identification of connected devices.

Multi-Room Audio Setup

Connect additional speakers for whole-home audio.

Zone 2 Setup: Connect speakers to Zone 2 terminals.
Source selection: Choose which audio source plays in each zone.
Volume control: Adjust volume independently for each zone.
Wireless speakers: Pair compatible wireless speakers via Bluetooth.

WARNING! Do not exceed maximum power rating for connected speakers.

Smart Features

Voice control compatibility with Google Assistant and Amazon Alexa. Streaming services support via built-in apps. Mobile app control through LG ThinQ application.

Care & Cleaning

Unplug before cleaning. Use soft, dry cloth for exterior. Compressed air for vents.

CAUTION! Do not use liquid cleaners; avoid moisture near electrical components.

Regulatory Information

Troubleshooting

Symptom	Possible Cause	Corrective Action
No sound output	Input selection/volume	Check input source; ensure volume not muted; verify speaker connections.
Bluetooth not connecting	Pairing mode/distance	Enter pairing mode; ensure device within range; remove obstacles.
HDMI no signal	Cable/input selection	Check HDMI cable connection; verify correct input selected; try different port.
Network connection issues	WiFi signal/credentials	Check WiFi signal strength; verify password; restart router if needed.
Overheating	Ventilation blockage	Ensure proper ventilation; clear vents; reduce volume if excessive heat.

Reset: Hold POWER + SOURCE for 10 seconds to factory reset.

Service: 1-800-243-0000; www.lg.com/support