LG 8000 Dryer Manual

The LG 8000 Dryer is a high-efficiency electric dryer with steam refresh cycle, sensor drying technology, multiple drying cycles, large capacity drum, Wi-Fi connectivity, LED display, energy star certification, and advanced moisture sensing. Powered by 240V AC, 30A circuit. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: Large capacity stainless steel drum, LED control panel, Steam Refresh cycle, Sensor Dry technology, Multiple drying options, Lint filter, Exhaust vent.

Feature	Description
Steam Refresh	Reduces wrinkles and odors without washing
Sensor Dry	Automatically detects moisture levels for perfect drying
LED Display	Shows cycle status and remaining time
Wi-Fi Connectivity	Remote control and monitoring via ThinQ app
Large Capacity	Handles large loads efficiently
Multiple Cycles	Cotton, Permanent Press, Delicates, Quick Dry
Energy Star	Energy efficient operation
Child Lock	Prevents accidental changes to settings
End of Cycle Signal	Audible alert when cycle completes
Door Reverse	Left or right door opening option

Installation

Unpack and inspect contents. Place on level surface near electrical outlet and venting.

1. Remove shipping materials: Remove all tape and protective coverings.
2. Level the dryer: Adjust leveling legs to ensure unit is stable.
3. Connect exhaust vent: Use 4-inch diameter metal ducting for proper ventilation.
4. Electrical connection: Connect to dedicated 240V, 30A circuit with proper grounding.
5. Gas connection (if applicable): For gas models, connect to gas supply with approved flexible connector.

WARNING! Dryer is heavy; use two people for installation. Ensure proper ventilation to prevent fire hazard.

First-Time Setup

Complete installation before first use.

1. Connect to power: Plug into dedicated 240V outlet.
2. Set up Wi-Fi: Download ThinQ app and follow pairing instructions.
3. Run initial cycle: Run empty tumble dry cycle to remove manufacturing residues.
4. Configure preferences: Set language, end signal volume, and default settings.
5. Test steam function: Ensure water supply is connected for steam cycles.

CAUTION! Do not operate without proper exhaust venting. Keep area around dryer clear of combustible materials.

Specifications

• Capacity: 8.0 cubic feet
• Power Source: 240V AC, 30A circuit
• Dimensions: 27" W x 30" D x 39" H
• Drum Material: Stainless steel
• Control Type: LED electronic with touch controls
• Drying Technology: Sensor Dry with moisture detection
• Steam Function: Yes, with separate water connection
• Wi-Fi: 2.4GHz Wi-Fi connectivity
• Energy Rating: Energy Star certified
• Weight: 150 lbs

Controls and Settings

Access controls via LED touch panel. Power Button: Turns dryer on/off. Cycle Select: Choose from available drying cycles.

Main Controls: POWER, CYCLE SELECT, OPTIONS, START/PAUSE, CHILD LOCK, STEAM REFRESH.

Drying Cycles: COTTON, PERMANENT PRESS, DELICATES, QUICK DRY, BEDDING, SANITIZE, AIR FLUFF. Options: Temperature (High, Medium, Low, No Heat), Dryness Level (More Dry, Normal, Less Dry), Time Dry (10-180 minutes), Signal Volume, Delay Start. Steam Settings: Refresh cycle duration (10-30 minutes), Steam Only mode.

Connecting Utilities

Electrical: 240V dedicated circuit. Venting: 4-inch metal exhaust duct. Water (for steam): Cold water connection.

1. Turn off power at circuit breaker before electrical connection.
2. Use metal ducting only - never plastic or foil.
3. Ensure water supply valve is accessible and connections are tight.
4. Verify proper grounding of electrical connection.

Tip: Keep exhaust vent as short and straight as possible for optimal performance.

Operating Cycles

Supports multiple fabric types and drying needs.

1. Load dryer: Place sorted laundry in drum, do not overload.
2. Select cycle: Choose appropriate cycle for fabric type.
3. Set options: Adjust temperature, dryness level, or time as needed.
4. Start cycle: Press START/PAUSE to begin drying.
5. Monitor progress: LED display shows remaining time and cycle status.
6. Complete cycle: Remove laundry promptly when cycle ends.
7. Clean lint filter: Clean after every cycle for optimal performance.

WARNING! Do not dry items containing foam, rubber, or plastic. Clean lint filter regularly to prevent fire hazard.

Steam Features

Steam Refresh: Reduces wrinkles in 20 minutes. Steam Sanitize: Reduces allergens and bacteria.

1. Connect water supply: Ensure cold water line is connected and turned on.
2. Select Steam cycle: Choose Steam Refresh or Steam Sanitize.
3. Set duration: 10-30 minutes for refresh, 30 minutes for sanitize.
4. Start cycle: Dryer will steam without tumbling for refresh cycle.
5. Remove items: Hang or fold immediately after cycle completion.

Note: Steam cycles work best with slightly damp or dry items, not wet laundry.

Care & Cleaning

Unplug before cleaning. Wipe exterior with damp cloth. Clean lint filter after every use.

1. Lint filter: Remove and clean under running water monthly.
2. Exhaust vent: Inspect and clean annually to maintain airflow.
3. Drum: Wipe with soft damp cloth as needed.
4. Control panel: Clean with soft dry cloth only.
5. Water inlet filter: Clean every 6 months for steam function.

CAUTION! Do not use abrasive cleaners or solvents. Never spray water directly on controls.

Regulatory Information

UL listed; complies with FCC Part 15 for digital devices. Energy Star certified for energy efficiency. Copyright © 2024 LG Electronics; all rights reserved. For support, visit www.lg.com or contact 1-800-243-0000. Model: LG 8000 Dryer. Serial number located on door frame.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Dryer won't start	Power/door	Check power connection; ensure door is fully closed; reset circuit breaker.
Clothes not drying	Lint/venting	Clean lint filter; check exhaust vent for blockage; verify proper heat settings.
Unusual noise	Objects in drum	Check for foreign objects; ensure load is balanced; verify installation level.
Error codes displayed	System faults	Refer to error code chart in manual; reset dryer; contact service if persistent.
Steam not working	Water supply	Check water connection; ensure valve is open; clean water inlet filter.

Reset: Unplug for 1 minute then restart. Check error codes in display.

Service: 1-800-243-0000; www.lg.com