LG 7.3 Electric Dryer Manual

The LG 7.3 Electric Dryer is a high-efficiency 7.3 cubic foot capacity dryer featuring multiple drying cycles, temperature settings, moisture sensor technology, wrinkle care option, child lock, end-of-cycle signal, and energy-saving modes. Designed for 240V electrical connection with standard 4-prong plug. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Venting Requirements 7. Operating the Dryer 8. Safety Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: 7.3 cu.ft. stainless steel drum, LED control panel, moisture sensor, lint filter, exhaust vent, power cord.

Feature	Description
Capacity	7.3 cubic feet stainless steel drum
Moisture Sensor	Automatically detects dryness level
Drying Cycles	Normal, Delicates, Heavy Duty, Quick Dry
Temperature Settings	High, Medium, Low, Air Fluff
Wrinkle Care	Tumbles periodically after cycle ends
Child Lock	Prevents accidental setting changes
LED Display	Shows cycle time and settings
Lint Filter	Removable for easy cleaning
End-of-Cycle Signal	Audible alert when drying complete
Energy Saver	Reduces energy consumption

Installation

Unpack and inspect contents. Place on level floor.

Electrical connection: Ensure 240V outlet with proper grounding. Connect 4-prong power cord.
Venting: Install 4-inch diameter rigid metal ducting to exterior vent.
Leveling: Adjust leveling legs to ensure dryer is stable and balanced.
Gas connection (if applicable): For gas models, connect gas line with approved fittings.

WARNING! Dryer is heavy; use two people for installation. Ensure proper electrical connection by qualified electrician.

First-Time Setup

Complete installation before first use.

Remove shipping materials: Check drum interior and remove all packaging.
Connect power: Plug into dedicated 240V outlet.
Test operation: Run empty on Air Fluff cycle for 10 minutes to remove manufacturing residues.
Set preferences: Configure end-of-cycle signal, default temperature, and other user settings.

CAUTION! Do not operate without proper venting. Ensure lint filter is installed correctly.

Specifications

Capacity: 7.3 cubic feet
Power Requirements: 240V AC, 30A
Dimensions: 27" W x 29" D x 38" H
Drum Material: Stainless steel
Control Type: Electronic with LED display
Drying Cycles: 8 cycles including sensor drying
Temperature Settings: 4 settings plus air fluff
Moisture Sensor: Yes - automatic dryness control
Venting: 4-inch diameter required
Weight: 130 lbs

Controls and Settings

Access settings via control panel. Power Button: Turns dryer on/off. Cycle Selector: Choose drying cycle. Temperature: Select heat level. Options: Wrinkle Care, Signal, Energy Saver.

Display: Shows remaining time, cycle status, and error codes.

Cycles: Normal, Heavy Duty, Delicates, Quick Dry, Sanitize, Air Fluff, Timed Dry, Sensor Dry. Temperature: High, Medium, Low, No Heat. Options: Wrinkle Care (tumbles periodically), End Signal (audible alert), Energy Saver (reduced energy use), Child Lock (locks controls).

Venting Requirements

Proper venting is essential for efficient operation and safety.

Use rigid metal ducting - minimum 4-inch diameter.
Keep vent run as short and straight as possible.
Maximum vent length: 25 feet (subtract 5 feet for each 90° elbow).
Ensure exterior vent hood opens freely and is clear of obstructions.

Tip: Clean lint from venting system at least once per year.

Operating the Dryer

Supports various fabric types and drying needs.

Load laundry: Do not overload - leave space for tumbling.
Select cycle: Choose appropriate cycle for fabric type.
Set temperature: Select heat level based on fabric care labels.
Start dryer: Close door and press START.
Monitor progress: LED display shows remaining time.
Clean lint filter: Remove and clean lint filter after every load.
Unload promptly: Remove clothes when cycle ends to minimize wrinkles.

WARNING! Do not dry items containing foam, rubber, or plastic. Clean lint filter after every use.

Safety Features

Child Lock: Disables control panel to prevent accidental changes. Thermal Fuse: Prevents overheating. Door Switch: Stops operation when door is opened. Moisture Sensor: Prevents over-drying and damage to fabrics.

Care & Cleaning

Unplug before cleaning. Wipe exterior with damp cloth. Clean lint filter after every load. Clean drum interior with mild detergent.

CAUTION! Do not use abrasive cleaners. Keep control panel dry. Clean venting system annually.

Regulatory Information

UL Listed: Complies with UL standard 2158. Energy Star: Meets ENERGY STAR requirements for energy efficiency. Copyright © 2025 LG Electronics; trademarks of LG Electronics, Inc. For support, visit www.lg.com or contact 1-800-243-0000.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Dryer won't start	Door/power	Ensure door fully closed; check power connection; verify circuit breaker.
Clothes not drying	Lint/venting	Clean lint filter; check venting for obstructions; verify proper heat setting.
Noisy operation	Objects/balance	Check for objects in drum; ensure load is balanced; verify installation.
Error codes displayed	Sensor/issues	Consult error code chart in manual; reset dryer; call service if persistent.
Overheating	Venting/filter	Clean lint filter; check venting system; ensure adequate airflow.

Reset: Unplug for 5 minutes then restart if available.

Service: 1-800-243-0000; www.lg.com