lg 24en43 manual

The LG 24EN43 is a 24-inch LED monitor with Full HD resolution, IPS panel technology, HDMI and VGA inputs, built-in speakers, energy-saving features, and ergonomic design. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Display Modes 8. Energy Saving Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: 24-inch IPS LED panel, HDMI and VGA inputs, built-in speakers, tilt adjustment, on-screen display controls.

Feature	Description
Screen Size	24-inch IPS LED display
Resolution	Full HD 1920x1080
Inputs	HDMI, VGA
Audio	Built-in speakers, headphone jack
Panel Type	IPS technology
Response Time	5ms
Viewing Angle	178°/178°
Brightness	250 cd/m²
Contrast Ratio	1000:1
Power Consumption	Energy Star certified

Installation

Unpack and inspect contents. Place on stable surface.

Attach stand: Align stand with monitor base and secure with provided screws.
Connect video sources: Use HDMI or VGA cable to connect to computer or other devices.
Connect audio: Use audio cable if needed for external speakers.
Plug into AC power.

WARNING! Monitor is heavy; lift with care to avoid injury. Ensure all connections are secure.

First-Time Setup

Power on monitor; follow on-screen prompts if available.

Select input source: Press INPUT button to choose between HDMI and VGA.
Adjust display settings: Use OSD menu for brightness, contrast, color settings.
Set language: In OSD menu, select preferred language.
Configure audio: Adjust volume and sound settings as needed.

CAUTION! Ensure stable surface; avoid placing in direct sunlight.

Specifications

Screen Size: 24 inches LED.
Resolution: 1920x1080 Full HD.
Panel Type: IPS technology.
Response Time: 5ms.
Brightness: 250 cd/m².
Contrast Ratio: 1000:1.
Inputs: HDMI, VGA.
Audio: Built-in speakers, headphone jack.
Power Source: 100-240V AC, 50/60Hz.
Operating Temp: 0°C to 40°C.

Controls and Settings

Access OSD via control buttons on monitor. Front Panel: Power button, Menu button, Input select, Volume controls.

OSD Menu: Picture settings, Input selection, Audio settings, Setup options, Color adjustments.

Picture: Brightness, Contrast, Sharpness, Color Temperature, Gamma. Audio: Volume, Balance, Equalizer. Setup: Language, OSD timeout, Reset. Input: HDMI, VGA selection.

Connecting Devices

HDMI: Digital audio/video connection. VGA: Analog video connection.

Turn off monitor and devices before connecting.
Match cables to ports (HDMI to HDMI, VGA to VGA).
Select input via INPUT button (HDMI or VGA).
Connect audio separately if using VGA input.

Tip: Use HDMI for best picture quality and integrated audio.

Display Modes

Supports various picture modes for different usage scenarios.

Standard Mode: Balanced settings for general use.
Cinema Mode: Enhanced contrast and color for movies.
Game Mode: Faster response time for gaming.
Reading Mode: Reduced blue light for extended reading.
Custom Mode: User-defined settings.

WARNING! Avoid using maximum brightness for extended periods to prevent image retention.

Energy Saving Features

Energy Star certified with multiple power saving modes.

Auto Power Off: Turns off monitor after specified idle time.
Eco Mode: Reduces power consumption by adjusting brightness.
Sleep Mode: Enters low-power state when no signal detected.

Care & Cleaning

Unplug before cleaning. Use dry, soft cloth only; no liquids or chemicals.

CAUTION! Do not spray liquids directly on screen; avoid abrasive materials.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © 2025 LG Electronics; all rights reserved. Energy Star certified. For support, visit www.lg.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Power cable connection	Check power cable; ensure outlet is working.
No display	Input selection/cables	Select correct input; check cable connections.
Poor image quality	Settings/cables	Adjust picture settings; check cable quality.
No sound	Audio settings/connections	Check volume; ensure audio cable connected.
Flickering display	Refresh rate/cables	Adjust refresh rate; check cable connections.

Reset: Menu > Setup > Reset to factory defaults.

Service: Contact LG customer support or visit www.lg.com