LG 1701 Dryer Gas Manual

The LG 1701 is a high-efficiency gas dryer featuring multiple drying cycles, temperature settings, moisture sensor technology, stainless steel drum, reversible door, and energy-saving options. Designed for residential use with natural gas connection, it includes safety features like thermal fuse, lint filter indicator, and child lock. Below are key sections for safety, features, installation, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Gas Line 7. Operating the Dryer 8. Maintenance & Cleaning 9. Safety Features 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Stainless steel drum, control panel with digital display, moisture sensors, lint filter, reversible door, gas connection port, exhaust vent.

Feature	Description
Moisture Sensor	Automatically detects dryness level for optimal drying
Stainless Steel Drum	Durable, rust-resistant drying chamber
Multiple Cycles	Cotton, Permanent Press, Delicates, Quick Dry, Air Fluff
Temperature Settings	High, Medium, Low, No Heat
Reversible Door	Left or right opening for installation flexibility
Child Lock	Prevents accidental setting changes
Lint Filter Indicator	Alerts when lint filter needs cleaning
Energy Saving Mode	Reduces gas consumption during operation
Delay Start	Program drying start time up to 12 hours
End of Cycle Signal	Audible alert when drying completes

Installation

Unpack and inspect contents. Place on level, stable surface near gas and electrical outlets.

Connect gas line: Use approved flexible gas connector; apply pipe thread sealant.
Connect exhaust vent: Use 4-inch diameter metal duct; ensure proper ventilation.
Electrical connection: Plug into dedicated 120V, 15A grounded outlet.
Level the dryer: Adjust leveling legs to prevent vibration.
Test for leaks: Apply soap solution to gas connections; check for bubbles.

WARNING! Gas connection must be performed by qualified technician. Ensure adequate clearance for ventilation.

First-Time Setup

After installation, perform initial setup and test run.

Remove shipping materials: Check drum and remove all packing materials.
Install lint filter: Place filter in designated slot.
Connect power: Plug into electrical outlet.
Gas line check: Ensure gas valve is open; check for leaks.
Test run: Run empty on Air Fluff cycle for 10 minutes to burn off manufacturing residues.
Set preferences: Configure end of cycle signal, default temperature settings.

CAUTION! Do not use dryer until all installation steps are complete and verified.

Specifications

Capacity: 7.3 cubic feet
Fuel Type: Natural Gas
Gas Connection: 1/2-inch NPT
Gas Consumption: 22,000 BTU/hour
Electrical: 120V, 60Hz, 15A
Drum Material: Stainless Steel
Dimensions: 27" W x 29" D x 43" H
Weight: 125 lbs
Exhaust: 4-inch diameter
Warranty: 1 year parts and labor

Controls and Settings

Control Panel: POWER, CYCLE SELECTOR, TEMPERATURE, OPTIONS, START/PAUSE, CHILD LOCK.

Drying Cycles: Cotton (Heavy, Normal, Light), Permanent Press, Delicates, Quick Dry, Timed Dry, Air Fluff, Sanitize.

Temperature Settings: High (for heavy fabrics), Medium (normal loads), Low (delicates), No Heat (air fluff). Options: Delay Start, Signal Volume, Energy Saving, Wrinkle Care. Settings: Default temperature, end signal volume, child lock activation.

Connecting Gas Line

Gas connection requirements and procedures.

Turn off main gas supply before connection.
Use only approved flexible gas connector rated for natural gas.
Apply pipe thread sealant suitable for natural gas to all threaded connections.
Connect to 1/2-inch NPT gas inlet on dryer rear.
Open gas supply slowly; check all connections with soap solution for leaks.
Do not use excessive force on gas line connections.

Tip: Have gas connection inspected by qualified professional before first use.

Operating the Dryer

Daily operation procedures and cycle selection.

Load laundry: Do not overload; leave space for tumbling.
Select cycle: Choose appropriate cycle for fabric type.
Set temperature: Select heat level based on fabric care labels.
Add options: Delay start, wrinkle care, energy saving as needed.
Start dryer: Press START/PAUSE; moisture sensor will optimize drying time.
Clean lint filter: Remove and clean lint filter after every load.
Unload promptly: Remove clothes immediately after cycle completion.

WARNING! Do not dry items containing foam, rubber, or plastic. Clean lint filter regularly to prevent fire hazard.

Maintenance & Cleaning

Regular maintenance ensures optimal performance and safety.

Lint filter: Clean after every load; wash monthly with warm water.
Exhaust system: Inspect vent quarterly; clean annually.
Drum: Wipe with damp cloth; avoid abrasive cleaners.
Exterior: Clean with mild detergent and soft cloth.
Gas connections: Check annually for leaks.

CAUTION! Unplug dryer before cleaning. Do not use harsh chemicals on surfaces.

Safety Features

Thermal Fuse: Prevents overheating by cutting power if temperature exceeds safe limits. Child Lock: Disables control panel to prevent accidental changes. Door Switch: Stops operation when door is opened. Moisture Sensor: Prevents overdrying and fabric damage. Lint Filter Indicator: Alerts when filter needs cleaning.

Regulatory Information

UL listed; meets ANSI Z21.5.1 standards for gas clothes dryers. CSA certified for safety. Energy Star compliant. Manufactured to LG quality standards. For support, visit www.lg.com or contact LG Customer Service at 1-800-243-0000.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Dryer won't start	Door not closed, power issue	Ensure door fully closed; check power cord; reset circuit breaker.
No heat	Gas supply, thermal fuse	Check gas valve; verify pilot light; inspect thermal fuse.
Clothes too wet	Overloading, lint filter	Reduce load size; clean lint filter; check moisture sensor.
Unusual noise	Foreign objects, worn parts	Check for objects in drum; inspect rollers and belts.
Gas odor	Leak in connection	Turn off gas immediately; check connections with soap solution.
Long drying times	Vent blockage, heavy loads	Clean exhaust vent; separate heavy items; check gas pressure.

Reset: Unplug for 5 minutes to reset electronic controls.

Service: 1-800-243-0000; www.lg.com