LG 10kg Front Loader Manual

The LG 10kg Front Loader is a high-efficiency washing machine with 10kg capacity, multiple wash programs, energy-saving features, direct drive motor technology, steam function, smart diagnosis system, child lock, delay start, and various fabric care options. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Utilities 7. Wash Programs 8. Special Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Front loading drum, electronic control panel, detergent dispenser, water inlet valves, drain pump, direct drive motor.

FeatureDescription
Capacity10kg load capacity for large laundry loads
Direct Drive MotorDirect connection for quieter operation and longer life
Steam FunctionReduces wrinkles and removes allergens
Smart DiagnosisAutomatically diagnoses issues via sound analysis
Child LockPrevents accidental program changes
Delay StartProgram start delay up to 19 hours
Energy RatingHigh energy efficiency class
Water ConsumptionLow water usage per cycle
Spin SpeedVariable spin speeds up to 1400 RPM
Wash ProgramsMultiple specialized wash cycles

Installation

Unpack and inspect contents. Place on level, solid floor.

  1. Remove transit bolts: Use spanner to remove all transit bolts from rear.
  2. Connect water supply: Attach hot and cold water hoses to corresponding valves.
  3. Connect drain hose: Secure drain hose to standpipe or sink.
  4. Level the machine: Adjust feet to ensure machine is perfectly level.
  5. Plug into power outlet.

WARNING! Do not remove transit bolts before installation. Ensure water connections are tight to prevent leaks.

First-Time Setup

Power on machine; run initial test cycle.

  1. Check water connections: Ensure both hot and cold water are connected properly.
  2. Run test cycle: Select COTTONS program and run without laundry.
  3. Set preferences: Configure default settings like temperature, spin speed.
  4. Load detergent: Fill detergent dispenser compartments.
  5. Verify drainage: Ensure water drains properly during test cycle.

CAUTION! Always level the machine properly to prevent vibration and noise during operation.

Specifications

Controls and Settings

Access programs via rotary dial and touch buttons. Display shows remaining time, current cycle, and options.

Main Controls: POWER, START/PAUSE, PROGRAM SELECTION, TEMPERATURE, SPIN SPEED, OPTION BUTTONS.

Program Selection: Cotton, Synthetic, Delicates, Wool, Quick 30', Steam Care, Allergy Care, Tub Clean. Temperature Settings: Cold, 20°C, 30°C, 40°C, 60°C, 90°C. Spin Speed: No Spin, 400, 600, 800, 1000, 1200, 1400 RPM. Options: Pre Wash, Extra Rinse, Delay Start, Child Lock.

Connecting Utilities

Water Inlet: Hot and cold water connections. Drain: Drain hose connection. Power: Standard power outlet.

  1. Turn off water supply before connecting hoses.
  2. Use only approved hoses and fittings.
  3. Ensure drain hose is not kinked or bent sharply.
  4. Connect to grounded power outlet only.

Tip: Install water leak detection device for added safety.

Wash Programs

Supports various fabric types and soil levels.

  1. Cotton: For cotton and linen fabrics, high temperature options
  2. Synthetic: For synthetic fabrics, medium temperature
  3. Delicates: Gentle cycle for delicate items
  4. Wool: Special wool cycle with reduced agitation
  5. Quick Wash: 30-minute cycle for lightly soiled items
  6. Steam Care: Steam function for hygiene and wrinkle reduction
  7. Allergy Care: Extra rinse cycles for allergen removal
  8. Tub Clean: Cleans and maintains drum hygiene

WARNING! Do not overload machine. Follow fabric care labels for best results.

Special Features

Direct Drive: Motor directly connected to drum for quiet operation. Steam Function: Reduces allergens and wrinkles. Smart Diagnosis: Identifies issues through sound patterns. 6 Motion Technology: Multiple wash motions for better cleaning.

Care & Cleaning

Regular maintenance ensures optimal performance and longevity.

  1. Clean detergent dispenser monthly
  2. Run Tub Clean program every 30 cycles
  3. Wipe door seal and glass regularly
  4. Clean drain pump filter every 3 months
  5. Leave door slightly open between uses to prevent odors

CAUTION! Unplug machine before cleaning. Use only mild detergents.

Regulatory Information

CE certified: Complies with European safety standards. Energy Label: A+++ rating for energy efficiency. Water Efficiency: Meets water conservation standards. For support, visit www.lg.com or contact LG customer service at local service center.

Troubleshooting

SymptomPossible CauseCorrective Action
Machine won't startPower/child lockCheck power connection; ensure child lock is off; close door properly.
No water intakeWater supply/tapsCheck water taps are on; ensure hoses not kinked; clean inlet filters.
Water not drainingDrain hose/filterCheck drain hose position; clean drain pump filter; remove blockages.
Excessive vibrationLeveling/loadRe-level machine; redistribute load evenly; remove transit bolts.
Error codes displayedVarious issuesRefer to error code chart in manual; use Smart Diagnosis feature.

Reset: Unplug for 1 minute then restart if experiencing issues.

Service: Contact LG authorized service center; use Smart Diagnosis for quick troubleshooting.

LG 10kg Front Loader Manual © - All Rights Reserved 2025